Molecular mass distribution of sodium alginate by high-performance size-exclusion chromatography

A sensitive high-performance size-exclusion chromatography (HPSEC) method with simple UV detection was developed for the molecular mass analysis of sodium alginate. It was used to evaluate alginates of varying molecular mass and the results were compared with the viscosity measurements. This HPSEC method was sensitive to serve as the stability indicating method for alginate after storage under different conditions. The information of relative molecular mass distribution of alginate was provided with reference to pullulan molecular mass standards. The comparison of the HPSEC chromatograms of alginate, pullulan and dextran revealed the effect of chemical composition of a polysaccharide and its effect on apparent molecular mass distribution.     

Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.     

Contributions to the determination of histamine rate by measuring out the histamine-orthophthalaldehyde complex in the absorption and fluorescence

Histamine is an important compound from a physiological point of view, but it is toxic since the absorption of low amounts of histamine can cause abdominal pains accompanied with vomiting. Why we have developed a new method for histamine analysis in order to improve Lerke and Bell method. From the absorption spectra, we showed that the stoichiometry of the complex histamine-orthophthalaldehyde (OPA) is 1:1. From the emission spectra, it was observed that the complex fluorescence is inhibited in acidic medium. In alkaline medium, an exaltation of fluorescence was observed, but the complex histamine-OPA was unstable. Nevertheless, kinetic study showed that good linear correlations between the fluorescence maxima of the formed complex and the histamine concentration could be obtained in this alkaline medium.     

Cobalt blood levels after total hip replacement (THR): a new follow-up study in Trieste (Italy)

Cobalt and chromium release in patients undergone a metal-on-metal total hip replacement (THR) is a matter recently discussed and whose we do not have enough information about it yet. In literature there is little data and not completely indicative, in the biological fluids and organs the amounts of released metals are different. This is also due to the fact that cobalt and chromium blood levels can change depending on physical and working activity, individual feeding and metabolism. The results obtained confirm the presence of an increase of cobalt inthe blood of patients after total hip replacement, while the chromium levels are almost alike: average values in patients operated are 4.1 +/- 1.5 microg/L for cobalt (0.3 +/- 0.1 microg/L in the control group) and 4.5 +/- 2.9 microg/L for chromium (4.7 +/- 2.4 microg/L in the control group). In spite of the cobalt values stand below the concentration generally considered dangerous, the difference between the two examined groups points out that a risk exists for the health of these patients. These results must be confirmed by further studies, providing better information and more reliable and biocompatible materials.     

Dynamic behaviour of river colloidal and dissolved organic matter through cross-flow ultrafiltration system

Through cross-flow filtration (CFF) with a 1-kDa regenerated cellulose Pellicon 2 module, the ultrafiltration characteristics of river organic matter from Longford Stream, UK, were investigated. The concentration of organic carbon (OC) in the retentate in the Longford Stream samples increased substantially with the concentration factor (cf), reaching approximately 40 mg/L at cf 15. The results of dissolved organic carbon (DOC) and colloidal organic carbon (COC) analysis, tracking the isolation of colloids from river waters, show that 2 mg/L of COC was present in those samples and good OC mass balance (77-101%) was achieved. Fluorescence measurements were carried out for the investigation of retentate and permeate behaviour of coloured dissolved organic materials (CDOM). The concentrations of CDOM in both the retentate and permeate increased with increasing cf, although CDOM were significantly more concentrated in the retentate. The permeation model expressing the correlation between log[CDOM] in the permeate and logcf was able to describe the permeation behaviour of CDOM in the river water with regression coefficients (r(2)) of 0.94 and 0.98. Dry weight analysis indicated that the levels of organic colloidal particles were from 49 to 71%, and between 29 and 51% of colloidal particles present were inorganic. COC as a percentage of DOC was found to be 10-16% for Longford Stream samples.     

Biomimetic zinc funnel complexes based on calix[6]N3ArO ligands: an acid-base switch for guest binding

The coordination chemistry of Zn in an N(3)ArOH environment has been explored. The ligands are based on calix[6]arenes that present two imidazole arms and an amino phenol moiety at the narrow rim. Three different types of complexes have been characterized. One is dicationic with Zn(2+) coordinated to the three nitrogen atoms and to the oxygen of the phenol group of the calix[6]ligand. This complex is very sensitive to exogenous coordinating molecules and exists as a 5-coordinate species due to the endo-complexation of a guest. The second species is a monocationic complex for which the phenol group has been deprotonated. The resulting N(3)ArOZn complex can also bind a guest ligand albeit with a lower affinity than the dicationic complex. The third species is neutral. It can be obtained upon reaction with a base to yield a hydroxo complex or with an anion such as a chloride that coordinates the metal center from the outside of the calixarene cavity. The simultaneous binding of two anionic donors decreases the Zn Lewis acidity, allowing an impressive conformational reorganization of the system. One imidazole arm is released by the metal center. The other one undergoes self-inclusion into the pi-basic calixarene cavity because the low affinity of the metal center for neutral ligand does not allow the endo-coordination of an exogenous guest. Hence, the calix[6]N(3)ArOH-based Zn complexes act as an acid-base switch for guest binding. Several aspects of this system appear reminiscent of Zn-peptidases of the astacin and serralisin families.     

High-resolution electron microscopy of montmorillonite and montmorillonite/epoxy nanocomposites

With the use of high-resolution transmission electron microscopy the structure and morphology of montmorillonite (MMT), a material of current interest for use in polymer nanocomposites, was characterized. Using both imaging theory and experiment, the procedures needed to generate lattice images from MMT were established. These procedures involve careful control of the microscope's objective lens defocus to maximize contrast from features of a certain size, as well as limiting the total dose of electrons received by the sample. Direct images of the MMT lattice were obtained from neat Na+ MMT, organically modified MMT, and organically modified MMT/epoxy nanocomposites. The degree of crystallinity and turbostratic disorder were characterized using electron diffraction and high-resolution electron microscopy (HREM). Also, the extent of the MMT sheets to bend when processed into an epoxy matrix was directly visualized. A minimum radius of curvature tolerable for a single MMT sheet during bending deformation was estimated to be 15 nm, and from this value a critical failure strain of 0.033 was calculated. HREM can be used to improve the understanding of the structure of polymer nanocomposites at the nanometer-length scale.     

Coarse-grained rigid blob model for soft matter simulations

We have developed a coarse-grained multiscale molecular simulation method for soft matter systems that directly incorporates stereochemical information. We divide the material into disjoint groups of atoms or particles that move as separate rigid bodies; we call these groups "rigid blobs," hence the name coarse-grained rigid blob model. The method is enabled by the construction of transferable interblob potentials that approximate the net intermolecular interactions, as obtained from ab initio electronic structure calculations, other all-atom empirical potentials, experimental data, or any combination of the above. We utilize a multipolar expansion to obtain the interblob potential-energy functions. The series, which contains controllable approximations that allow us to estimate the errors, approaches the original intermolecular potential as the number of terms increases. Using a novel numerical algorithm, we can calculate the interblob potentials very efficiently in terms of a few interaction moment tensors. This reduces the labor well beyond what is required in standard molecular-dynamics calculations and allows large-scale simulations for temporal scales commensurate with characteristic times of nano- and mesoscale systems. A detailed derivation of the formulas is presented, followed by illustrative applications to several systems showing that the method can effectively capture realistic microscopic details and can easily extend to large-scale simulations.     

Bioavailability, bioaccumulation and tolerance of chromium: consequences in the food chain of freshwater ecosystems

Many abiotic and biotic factors can influence the partitioning equilibrium of heavy metals, thus influencing metal impact on aquatic environments. Unicellular algal species release soluble organic substances able to complex metals. In our laboratory a Cr-tolerant strain was selected and isolated from a wild type strain of Scenedesmus acutus. The exudates released by the two strains counteracted the growth inhibition caused by Cr(VI) and the exudates of the Cr-tolerant strain were more effective. On the contrary, the exudates did not reduce chromium toxicity to the cladoceran Daphnia magna. The reduction of chromium effect on algae seems the consequence of an algae-specific interaction among Cr(VI), exudates and algal cells. Chromium uptake resulted to be energy-dependent since bioaccumulation rate in subdued light condition was lower than at high light intensity. The effect of Cr(VI) on algae changed depending on metabolism of the cells and in particular it seemed to be related to the bioaccumulation rate. Tolerance in the selected strain could not be ascribed to a lower uptake of chromium. The difference in sensitivity to chromium between the two strains was exploited to evaluate if tolerance acquired by algae could have consequences for Daphnia. After treatment with Cr(VI), the two strains of S. acutus were used as food source for D. magna. The results indicate that chromium is accumulated by algae in a form not available for daphnids and that Cr tolerance acquired by the algae can be of some advantage to the consumer organism.     

A practical approach to high performance capillary electrophoresis with biosynthetic human growth hormone as a model protein

Biosynthetic human Growth Hormone (B-hGH) is a protein comprising 191 amino acids. The molecular weight is 22,125 and the isoelectric point is close to pH 5. Due to the ready availability of closely related analogues B-hGH was used as a model protein thus allowing for the demonstration and evaluation of the high resolution capability of high performance capillary electrophoresis (HPCE). The same apparatus was used throughout the experiments and an optimum signal-to-noise ratio was found at 200 nm. Linearity was observed between peak area, retention time and the hGH concentration or sample introduction time. Baseline separation of hGH, desamido hGH and didesamido hGH was obtained. Examples showing analysis with 1 million theoretical plates per meter, high speed separation, simultaneous analysis of multiple samples, sample stacking, hGH tryptic digest, and hGH lysate are reported. The use of electrophoretic velocities instead of apparent velocities for peak identification is illustrated.