Amperometric carbohydrate detection in flow systems by means of a bismuth modified platinum electrode

Bismuth modified platinum electrodes are used for constant-potential amperometric determination of carbohydrates in flow systems. The monitored response is stable and reproducible over more than two days. An attempt is made to gain more detailed information about the characteristics of the modified layer by electrochemical methods and X-ray photoelectron spectroscopy. The response proved to be linear over the investigated concentration range (1.1–1200 mol/L) and detection limits for glucose and fructose were found to be 1.1 mol/L.     

A facile highly regio- and stereoselective preparation of N-tosyl allylic amines from allylic alcohols and tosyl isocyanate via Palladium(II)-catalyzed aminopalladation-beta-heteroatom elimination

The high regio- and stereoselectivity have been obtained from the allylic substitution reaction catalyzed by palladium(II) species. From allylic alcohols, one-pot reaction with tosyl isocyanate followed by palladium(II)-catalyzed allylic substitution gives N-tosyl (E)-allylic amines in high yield. The substitution occurs only at the gamma-position of the 1- or 3-substituted allylic alcohols.     

Preservation of sensitive CRMs and monitoring their stability at IRMM

Over the years, the nature of CRMs has changed considerably. Recently, more and more CRMs have been certified in their "natural" form, that is processed as little as possible, with analytes at their natural concentration level. This and the trend towards certified properties other than the concentrations of clearly defined molecules/elements have made guaranteeing stability of CRMs and estimating a shelf life an even more important issue for reference material producers than it has been before. One way to meet this challenge is to take more care in processing, storage and dispatch of CRMs. At IRMM, approximately 20 % of the RMs are stored at –20 °C or below and about 10% require cooled transportation. In addition, increased efforts for assessing stability are needed. Shelf lives are estimated using addition of an uncertainty component based on real-temperature stability studies rather than by accelerated stability studies. These pre-certification efforts are complemented by a stability-monitoring program, which at IRMM includes 80 % of the non-nuclear and non-isotopic materials. Although the costs for these efforts are high in absolute terms, they are only a minor and indispensable contribution to the total costs of CRM production.     

Development of quantitative vitellogenin-ELISAs for fish test species used in endocrine disruptor screening

The yolk protein precursor vitellogenin (Vtg) in plasma has proved to be a simple and sensitive biomarker for assessing exposure of fish to environmental estrogens. Within international bodies such as the Organization for Economic Cooperation and Development (OECD) work is ongoing to develop screening and testing programmes for endocrine disrupting effects of new chemicals, and in the focus of this development are the fish test species common carp (Cyprinus carpio), fathead minnow (Pimephales promelas), zebrafish (Danio rerio) and Japanese medaka (Oryzias latipes). In this study we have developed quantitative enzyme linked immunosorbent assays (ELISAs) for Vtg in common carp/fathead minnow, zebrafish and Japanese medaka. The assays were developed using a combination of monoclonal and polyclonal fish Vtg antibodies in a sandwich format, using stabilized Vtg from the test species as a standard. The carp Vtg ELISA has a working range of 1–63 ng/mL, a minimal detection limit of 0.6 ng/mL, and may also be used for quantification of Vtg in fathead minnow. In fathead minnow whole-body homogenate samples, the practical detection limit is 400 ng/mL due to the matrix effect. The zebrafish Vtg ELISA has a working range of 0.5–63 ng/mL, a minimal detection limit of 0.4 ng/mL, and a practical detection limit of 200 ng/mL in whole-body homogenate samples. The medaka Vtg ELISA has a working range of 0.25–16 ng/mL, a minimal detection limit of 0.1 ng/mL, and a practical detection limit of 125 ng/mL in whole-body homogenate samples. The intra- and inter-assay variations were below 20% for all assays. The assays were evaluated with sets of representative samples spanning the wide dynamic range of Vtg-levels found in fish exposed to environmental estrogens, and all three assays are currently undergoing international inter-laboratory validation.     

New class of potent catalysts of O2.-dismutation. Mn(III) ortho-methoxyethylpyridyl- and di-ortho-methoxyethylimidazolylporphyrins

Three new Mn(III) porphyrin catalysts of O2.-dismutation (superoxide dismutase mimics), bearing ether oxygen atoms within their side chains, were synthesized and characterized: Mn(III) 5,10,15,20-tetrakis[N-(2-methoxyethyl)pyridinium-2-yl]porphyrin (MnTMOE-2-PyP(5+)), Mn(III)5,10,15,20-tetrakis[N-methyl-N'-(2-methoxyethyl)imidazolium-2-yl]porphyrin (MnTM,MOE-2-ImP(5+)) and Mn(III) 5,10,15,20-tetrakis[N,N'-di(2-methoxyethyl)imidazolium-2-yl]porphyrin (MnTDMOE-2-ImP(5+)). Their catalytic rate constants for O2.-dismutation (disproportionation) and the related metal-centered redox potentials vs. NHE are: log k(cat)= 8.04 (E(1/2)=+251 mV) for MnTMOE-2-PyP(5+), log k(cat)= 7.98 (E(1/2)=+356 mV) for MnTM,MOE-2-ImP(5+) and log k(cat)= 7.59 (E(1/2)=+365 mV) for MnTDMOE-2-ImP(5+). The new porphyrins were compared to the previously described SOD mimics Mn(III) 5,10,15,20-tetrakis(N-ethylpyridinium-2-yl)porphyrin (MnTE-2-PyP(5+)), Mn(III) 5,10,15,20-tetrakis(N-n-butylpyridinium-2-yl)porphyrin (MnTnBu-2-PyP(5+)) and Mn(III) 5,10,15,20-tetrakis(N,N'-diethylimidazolium-2-yl)porphyrin (MnTDE-2-ImP(5+)). MnTMOE-2-PyP(5+) has side chains of the same length and the same E(1/2), as MnTnBu-2-PyP(5+)(k(cat)= 7.25, E(1/2)=+ 254 mV), yet it is 6-fold more potent a catalyst of O2.-dismutation , presumably due to the presence of the ether oxygen. The log k(cat)vs. E(1/2) relationship for all Mn porphyrin-based SOD mimics thus far studied is discussed. None of the new compounds were toxic to Escherichia coli in the concentration range studied (up to 30 microM), and protected SOD-deficient E. coli in a concentration-dependent manner. At 3 microM levels, the MnTDMOE-2-ImP(5+), bearing an oxygen atom within each of the eight side chains, was the most effective and offered much higher protection than MnTE-2-PyP(5+), while MnTDE-2-ImP(5+) was of very low efficacy.     

Multiple binding modes of the camptothecin family to DNA oligomers

The binding constants of camptothecin, topotecan and its lactone ring-opened carboxylate derivative to DNA octamers were measured by UV and NMR spectroscopy. The self-association of topotecan (TPT) was also measured. The carboxylate form of TPT binds in the same way as the lactone, but more weakly. Titration of TPT into d(GCGATCGC)2 shows a preferred location stacked onto the terminal G1 base. However, the intermolecular NOEs cannot be reconciled with a single conformation of the complex, and suggest a model of a limited number of conformations in fast exchange. MD calculations on four pairs of starting structures with TPT stacked onto the G1-C8 base pair in different orientations were therefore performed. The use of selected experimental "docking" restraints yielded ten MD trajectories covering a wide conformational space. From a combination of calculated free energies, NOEs and chemical shifts, some of the structures produced could be eliminated, and it is concluded that the data are consistent with two major families of conformations in fast exchange. One of these is the conformation found in a crystal of a TPT/DNA/topoisomerase I ternary complex [Proc. Natl. Acad. Sci. USA 2002, 99, 15 387-15 392].     

Comparison of standard capillary and chip separations of sodium dodecylsulfate-protein complexes

Conditions for converting a set of five standard proteins to electrochemically active sodium dodecylsulfate (SDS) complexes were worked out with the aim of using such complexes for conductivity detection with a a chip electrophoresis system. The results obtained were compared with standard capillary electrophoresis (37 cm (effective length 30 cm)×75 μm I.D. capillary, 10 kV, negative polarity at the inlet). The chip separations were run at 500 V per chip (100 V/cm) as compared to the standard capillary arrangement, which was run at 266.6 V/cm. For the capillary set-up the protein complexes were prepared in aqueous solution (Milli-Q water) made 10 mM with respect to SDS. If the SDS concentration was increased to 50 mM, the separation in the capillary was incomplete. On the other hand with the chip system both approaches yielded acceptable results. The chip separations were slightly (but not distinctly) shorter and offered better separations than the standard set-up. The concentration of the surfactant used for the preparation the complexes results in alternations of the elution sequence, which is preserved if the chip separation is used instead of the capillary set-up. Apparently the full capacity of protein–SDS binding is not exploited for the preparation of the adducts.     

Inter-annual variability in atmospheric input and partitioning of heavy metals in the Lagoon of Venice

Atmospheric bulk deposition of major and trace elements was measured at Venice from November 1995 to October 1997. Collection was carried out using polyethylene bulk passive samplers, samples being collected bi-weekly. In order to highlight the contribution of the atmosphere to water chemistry and particle budgets in the Lagoon of Venice, the geochemical composition (Si, Al, Ca, Mg, K, Na, Mn, Cr, Zn, Pb, Cd, Cu, As) of dissolved and insoluble bulk fractions was determined by AAS + ICP mass spectrometry. Great sample variability was found, with almost two orders of magnitude between maximum and minimum values for several metals. All fluxes in 1995/96 were 30% lower than in 1996/97, ranging from -3% (Ca) to -57% (Li), except for Zn, Cd and As. On the contrary, the solubility of all elements decreased during 1996/97. Partitioning between soluble and insoluble phases shows that Al, Cr, Fe and Si are mainly in the insoluble form, whereas for As, Ca, Cu, Mg, Na, Ni, K, Pb and Zn the dissolved fraction represents 50-90% of total input. The amount of particle load affects partitioning between dissolved and particulate, especially for Al and Pb. Seasonal variability was evident. The lowest pH values (approximately 5.2) were recorded in winter, causing an increase of solubility for all metals except for As, which showed the highest solubility in summer.     

Metal-dependent regioselective oxidative coupling of 5,10,15-triarylporphyrins with DDQ-Sc(OTf)3 and formation of an oxo-quinoidal porphyrin

[reaction: see text] Regioselectivity of the oxidative coupling of 5,10,15-triarylporphyrin metal complexes with DDQ-Sc(OTf)(3) was dependent on the central metal and meso-aryl substituent. Oxo-quinoidal porphyrin was obtained from Ni(II) porphyrin under the same conditions.     

The C(2)1pi(u) state of Na2 molecule studied by polarization labelling spectroscopy method

The C1pi(u) <-- X1sigma(g)+ system of Na2 is studied by the polarization labelling spectroscopy technique. Accurate molecular constants are derived for the observed levels nu = 0-12, J = 12-100 in the C1pi(u) state.