Assessment of drinking water radioactivity content by liquid scintillation counting: set up of high sensitivity and emergency procedures

In our institute, different procedures have been developed to measure the radioactivity content of drinking water both in normal and in emergency situations, such as those arising from accidental and terrorist events. A single radiometric technique, namely low level liquid scintillation counting (LSC), has been used. In emergency situations a gross activity screening is carried out without any sample treatment by a single and quick liquid scintillation counting. Alpha and beta activities can be measured in more than one hundred samples per day with sensitivities of a few Bq/L. Higher sensitivity gross alpha and beta, uranium and radium measurements can be performed on water samples after specific sample treatments. The sequential method proposed is designed in such a way that the same water sample can be used in all the stages, with slight modifications. This sequential procedure was applied in a survey of the Lombardia district. At first tap waters of the 13 largest towns were examined, then a more detailed monitoring was carried out in the surroundings of Milano and Lodi towns. The high sensitivity method for the determination of uranium isotopes was used to check the presence of depleted uranium in Lake Garda. Reduced equipment requirements and relative readiness of radiochemical procedures make LSC an attractive technique which can also be applied by laboratories lacking specific radiochemistry facilities and experience.     

Emulsifying and foaming properties of amaranth seed protein isolates

The emulsifying and foaming properties of amaranth seed protein isolates prepared by wet extraction methods, such as isoelectric precipitation and dialysis, were investigated. The various isolates differ from each other in many ways. The isolate prepared by isoelectric precipitation mainly contains the globulin but not the albumin fraction and a considerable amount of polysaccharides, while the other isolate prepared by the dialysis method contains all the globulin and albumin fractions. The protein-polysaccharide complexes enhance emulsion stability due to steric repulsion effects. Measurements of the emulsion stability show that the studied protein isolates act as effective stabilizing agents. Foam expansion is dominated by the surface activity and availability of protein in the solution, while foam stability is determined by the properties of the interfacial layer. The results show that amaranth protein isolates act as an effective foaming agent. Both foaming properties intensified from the presence of protein-polysaccharide complexes.     

Study of the structure of poly(methyl methacrylate) obtained in the presence of potassium hydride

Electrospray ionization mass spectrometry (ESI-MS) in positive- and negative-ion mode and multi-step tandem mass spectrometry (ESI-MS ( n) ) were selected for the determination of the structure of poly(methyl methacrylate) obtained using potassium hydride as initiator. Macromolecules with methoxy and methyl starting groups, i. e. those situated at the beginning of the polymer backbone, were observed in this case. No other differences in the chain structure were found in the polymer.     

Water in carbon nanotubes: adsorption isotherms and thermodynamic properties from molecular simulation

Grand canonical Monte Carlo simulations are performed to study the adsorption of water in single-walled (6:6), (8:8), (10:10), (12:12), and (20:20) carbon nanotubes in the 248-548 K temperature range. At room temperature the resulting adsorption isotherms in (10:10) and wider single-walled carbon nanotubes (SWCNs) are characterized by negligible water uptake at low pressures, sudden and complete pore filling once a threshold pressure is reached, and wide adsorption/desorption hysteresis loops. The width of the hysteresis loops decreases as pore diameter narrows and it becomes negligible for water adsorption in (8:8) and (6:6) SWCNs. Results for the isosteric heat of adsorption, density profiles along the pore axis and across the pore radii, order parameter across the pore radii, and x-ray diffraction patterns are presented. Layered structures are observed when the internal diameter of the nanotubes is commensurate to the establishment of a hydrogen-bonded network. The structure of water in (8:8) and (10:10) SWCNs is ordered when the temperature is 298 and 248 K, respectively. By simulating adsorption isotherms at various temperatures, the hysteresis critical temperature, e.g., the lowest temperature at which no hysteresis can be detected, is determined for water adsorbed in (20:20), (12:12), and (10:10) SWCNs. The hysteresis critical temperature is lower than the vapor-liquid critical temperature for bulk Simple Point Charge-Extended (SPCE) water model.     

PFGSE-NMR study of the self-diffusion of sucrose fatty acid monoesters in water

The micellization of pure monosubstituted sucrose fatty acid esters in water, namely sucrose octanoate, sucrose decanoate, sucrose laurate, sucrose dodec-5-cis-enoate, sucrose myristate, and sucrose palmitate, has been investigated by means of two NMR methods, pulsed field gradient spin-echo NMR (PFGSE-NMR), giving access to the self-diffusion coefficients of free molecules and micelles in solution, and the ERETIC method (electronic reference to access in vivo concentrations) for the measurement of concentrations by external calibration of a synthetic NMR signal. The early micellar regions and, when possible, the premicellar regions were investigated. By this method, we obtained the hydrodynamic radii of micelles, displaying a linear progression in relation to the chain length and an accurate determination of critical micellar concentration (CMC) for each sucrose ester. The effect of the regiochemistry of fatty chain grafting has been investigated, showing special behavior for 1'-O-sucrose palmitate.     

Numerical treatment discussion and ab initio computational reinvestigation of physisorption of molecular hydrogen on graphene

A numerical treatment suitable for the computational investigation of physisorption of molecular hydrogen on carbon nanostructures has not been sufficiently discussed. In this paper it is shown that results used as a reference are actually a product of poorly solved interactions and contaminated estimates with errors which would be of the order of 60%. Moreover, using ab initio molecular orbital theory, under the rigid monomer supermolecular approach, the physisorption energy of molecular hydrogen on graphene was reinvestigated. The graphene surface was modeled as a coronenelike (C(24)H(12)) graphene sheet. The basis set superposition error was corrected by means of the counterpoise method. The H(2)-H(2) and H(2)-benzene interactions were examined, under systematic combinations of basis sets and correlation methods, including the aug-cc-pVQZ basis set and the coupled cluster correlation method with single, double, and noniterative triple excitations, searching for a numerical treatment with a reasonable trade-off between efficiency and accuracy. Asymmetrical modeling strategies, using diffusion augmented basis sets with preference for the adsorbate, were found to be effective. Also local modeling strategies, using more complete basis sets for the nearest atoms to the adsorbate than for the rest of the substrate, were considered. The aug-cc-pVTZ basis set for the adsorbate and for the nearest atoms to the adsorbate and the cc-pVTZ basis set for the rest of the cluster-modeled graphene, at the second-order Moller-Plesset perturbation theory correlation level, was selected as reference treatment. It was found that the physisorption energy of molecular hydrogen on graphene would be of the order of 0.06 eV, which would be 25% less than what has been previously published, though it would be sufficient to permit the storage of hydrogen physisorbed on carbon. To our knowledge this would be the most realistic theoretical estimate of the mentioned energy to date.     

Azadepsipeptides: synthesis and evaluation of a novel class of peptidomimetics

A general route to azadepsipeptides, a new class of pseudopeptides, has been established. The methodology was applied to the synthesis of a bis-aza analogue of the antiparasitic cyclooctadepsipeptide PF1022A. Comparison of the X-ray crystal structures of natural PF1022A (8) and the chimeric aza analogue 9 revealed that the introduction of nitrogen in the backbone of PF1022A results in almost complete conservation of the 3D structure with only minor deviations at the new nitrogen positions.     

Spectrophotometric determination of the stability constants of HgCl(-)3 and HgCl(2-)4 in aqueous ethanol

The stability constants of HgCl(-)(3) and HgCl(2-)(4) in 60% aqueous ethanol (v/v) were determined by spectroscopy at 25 degrees and constant ionic strength and acidity; beta(1) was 3 +/- 1 and beta(2) 9 +/-3.     

Potential energy surfaces for HenNe+ ions: ab initio and diatomics-in-molecule results

The potential energy surface of He2Ne+ has been reinvestigated using a combination of ab initio and diatomics-in-molecule (DIM) calculations. In contrast to the reports of two recent studies the ion is found to have an asymmetric linear He-Ne-He structure, with no barrier to formation from the separated atoms on the ground-state surface. The He-Ne+ bond lengths at the potential minimum are 1.51 and 1.81 A, and the total bonding energy is 0.717 eV. Comparing the He2Ne+ energy to that of HeNe+, the bonding energy for the second helium atom is 0.06 eV, about 10% of that of the first He atom. The saddle point between the two equivalent minima is a symmetric structure, 0.0074 eV above the potential minimum. A symmetric geometry becomes the overall potential minimum if the 2s hole on the Ne is excluded from the reference states of a multireference configuration interaction calculation. A DIM potential was created for the HenNe+ family of ions. The DIM potential is consistent with the asymmetric He2Ne+ ion serving as a core; it predicts a slightly more asymmetric geometry than the ab initio results. Additional helium atoms form five-membered rings around the bonds of the core ion to fill the first shell and then add to the ends of the cluster. The asymmetric core ion and the highly compact structure help to account for the lack of apparent shell structure in the mass spectrometry of HenNe+ clusters. Finally, we recommend that the value De=0.63+/-0.04 eV be adopted for the ground state of HeNe+.