Analysis,fabrication,and measurement of Y aperture element frequency selective surface

The analysis of Y aperture element frequency selective surface (FSS) using the spectral domain method and the moment method is presented.With the vacuum depositing and photolithography,the corresponding Y aperture element FSS was produced,and it was tested in the microwave darkroom.The calculated and measured results are in good agreement.     

Low—Lying Resonance States of Slow Electron Collisions With Atomic Oxygen

A 39-target state close-coupling calculation of low-energy electron scattering from atomic oxygen is carried out with core-valence electron correlation by using R-matrix method. It is shown that the elastic cross section has a huge and sharp increase with the electron energy going down below 1eV. This remarkable structure is attributed to a few very low-lying potential resonances and the features of these resonances are given with partial cross sections. It is also shown that after considering excitations of two electrons from 2s shell, the three lowest atomic energy levels are in agreement with experimental results better than that just considering excitations of two electrons from the 2p shell as well as only one electron from the 2s shell. Elastic and two excitation (^3P→^1D and ^3P→^1S) cross sections are given and compared with the other theoretical and experimental results.     

布基管和布基洋葱的结构及生长机理的研究

利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)和扫描隧道显微镜(STM),对布基管和布基洋葱的形貌、结构、生长机理进行了研究。结果表明采用垂直下落武装置制备布基管具有较大的产率,TEM的观察得到了布基管各种部位的横截面TEM象,报道了几种特殊结构的布基管和布基洋葱,分析了造成布基管形貌变化的原因,提出了布基管和布基洋葱生长过程的模板作用,提出在无定形石墨和布基管之间存在过渡态结构的观点,STM的研究结构获得了椅式布基管表面的原子象。     

Theoretical simulations of emission spectra of Fe^7＋ and Fe^＋8

The energy levels, oscillator strengths, spontaneous radiative decay rates, and electron impact collision strengths are calculated for Fe VIII and Fe IX using the recently developed flexible atomic code （FAC）. These atomic data are used to analyse the emission spectra of both laboratory and astrophysical plasmas. The nf-3d emission lines have been simulated for Fe VIII and Fe IX in a wavelength range of 6-14 nm. For Fe VIII, the predicted relative intensities of lines are insensitive to temperature. For Fe IX, however, the intensity ratios are very sensitive to temperature, implying that the information of temperature in the experiment can be inferred. Detailed line analyses have also been carried out in a wavelength range of 60-80 nm for Fe VIII, where the solar ultraviolet measurements of emitted radiation spectrometer records a large number of spectra. More lines can be identified with the aid of present atomic data. A complete dataset is available electronically from http：//www.astrnomy.csdb.cn/EIE/.     

DVB-S2标准下提高数字电视信号频谱效率的方法研究

【】：DVB-S2较DVB-S在频谱利用率上有明显提高。本文主要讨论在单转发器上传输多个数字电视载波的应用中,在DVB-S2标准技术框架下,通过选取不同的调制参数、创新应用升余弦滚降系数而进一步提高频谱利用率的方法。     

微波促进下无溶剂一锅法合成含氟喹唑啉-4(3H)-酮类化合物

采用邻胺基苯甲酸、原甲酸三乙酯及含氟苯胺为原料,在微波促进下,无溶剂一锅法高效合成了系列3-氟苯基-喹唑啉-4(3H)-酮类化合物,同时测试了新化合物的荧光性能,并与不含氟同类化合物的荧光发射光谱进行了比较.     

纳米固体碱CaO-ZrO2催化红麻籽油制备生物柴油

采用溶胶-凝胶法制备了CaO摩尔分数为10%~50%的CaO-ZrO2系列纳米催化剂,将其用于催化红麻籽油制备生物柴油,通过CO2-TPD、XRD和TEM等测试技术对催化剂的碱性、结构和表面形貌进行表征。 结果表明,CaO摩尔分数低于30%时,CaO与ZrO2形成连续固溶体,催化剂具有良好的热稳定性能,粒径为10~20 nm。 催化实验表明,当CaO摩尔分数为30%时,CaO-ZrO2催化剂具有最好的催化活性,甲醇与红麻籽油的摩尔比为12∶1、催化剂为油料质量比的2.5%、反应时间3 h时,最高转化率可达到93.2%。     

辊速辊温对高密度聚乙烯拉伸微孔膜及其片晶结构的影响

采用熔融挤出片材—退火—冷拉伸—热拉伸—热定形的方法来制备高密度聚乙烯(HDPE)微孔膜,利用FTIR、SEM和DSC等测试方法来研究辊速辊温对HDPE拉伸微孔膜及其片晶结构的影响.研究结果表明,所选树脂的分子量、分子量分布以及弛豫时间能够满足现有加工条件,形成片晶取向度较高的预制膜;在相同辊温下,随辊速增加,退火前预...