排序方式: 共有124条查询结果,搜索用时 0 毫秒
71.
在台面结构的GaN基发光二极管(LED)里,电流要侧向传输,当尺寸与电流密度加大之后,由于n型GaN层和下限制层的横向电阻不能忽略,造成了横向电流分布不均匀.通过优化电极结构,以减小电流横向传输距离,制作出两种不同电极结构的大功率GaN基倒装LED.通过比较这两种不同电极结构的GaN基倒装大功率LED的电、光性能,发现在350mA正向电流下,插指电极结构的倒装大功率GaN基LED的正向电压为3.35V,比环形插指电极结构的倒装大功率GaN基LED高0.15V.尽管环形插指电极结构GaN基LED的发光面积略小于插指电极结构GaN基LED,但在大电流下,环形插指电极结构倒装GaN基LED的光输出功率比插指电极结构的倒装大功率LED的光输出功率大.并且在大电流下,环形插指电极结构的倒装大功率LED光输出功率饱和速度慢,而插指电极结构的倒装大功率LED光输出功率饱和明显.这说明优化电极结构能提高电流扩展均匀性,减小焦耳热的产生,改善GaN基LED的性能. 相似文献
72.
73.
文中针对AlGaAs湿法氧化后器件热稳定性变差,导致性能下降的问题进行了研究。对不同氧化条件下样品的热稳定性进行了比较,证明采用降低炉温、延长氧化时间以及经过预加热处理等方法可以有效提高器件的热稳定性。利用拉曼谱分析了AlGaAs湿法氧化技术中影响热稳定性的因素,认为器件的热稳定性在一定程度上取决于湿法氧化生成物中挥发性产物含量的多少。 相似文献
74.
表面粗化提高红光LED的光提取效率 总被引:2,自引:0,他引:2
介绍了通过出光表面粗糙化来减少全反射的方法,实验中使用化学湿法腐蚀的技术获得预计的粗糙形貌,结果给出不同参数下的光强和光辐射功率比较,器件的外量子效率得到了约29%的提高。从理论和测试结果两方面阐述了表面粗糙化对提高红光LED外量子效率的机理。 相似文献
75.
全方位反射镜(ODR)AlGaInP发光二极管能够有效提高光提取效率。对全方位反射镜的设计及工艺进行优化:采用λ/4n厚的SiO2作为介质,光刻腐蚀导电孔,带胶保护,溅射AuZnAu,剥离后,再溅射300nmAu层,形成的ODR退火后在波长630nm处的反射率为72.1%,而单次溅射AuZnAu的反射率退火后为63.2%。实验结果说明新工艺满足了欧姆接触的需要,反射率提高了8.8%。 相似文献
76.
77.
78.
A novel asymmetrical GaAs/AlGaAs photoconductance infrared detector based on the new idea proposed in this paper has been developed,which uses the intersubband transition within the same conduction (valence) band due to infrared radiation. The detectors with two wells or six wells grown by Metalorganic Chemical Vapor Deposition (MOCVD) system are fabricated by etching a mesa size of 200tμm ×200μm. Evident infrared absorption on the wavelength from 5 to 10μm has been observed for two samples,so has the peak of negative differential conductance. It is demonstrated that the photocurrent together with the signal-to-noise ratio increases with the number of the wells, but have nothing to do with the increase of the noise current under the same electric field,i, e.,the voltage drops per period,as is different from the conventional GaAs/AlGaAs Quantum Well Infrared Photodetectors (QWIPs). The noise current is one order's magnitude lower than that of the conventional GaAs/AlGaAs QWIPs. It is anticipated that the photocurrent and detector performances can be improved further by increasing the number of wells and optimizing the structural parameters. 相似文献
79.
80.