Newly designed multilayer thin film mirror for dispersion compensation in Ti:sapphire femtosecond lasers

There are two different effects to generate group delay dispersion by multilayer thin film mirrors: chirper effect and Gires-Tournois effect. Both effects are employed to introduce desired dispersion in the designed mirror. Thus the designed mirror provides large dispersion throughout broad waveband. Such mirror can be used for dispersion compensation in Ti:sapphire femtosecond lasers. Most group delay dispersion of a 5-mm Ti:sapphire crystal can be compensated perfectly with only four bounces of the designed mirror.     

Effects of oxygen partial pressure on optical absorption edge and UV emission energy of ZnO films

ZnO, with a band-gap of 3.37 eV and a large exciton binding energy (about 60 meV) at room temperature, is a promising material for optoelectronic devices, field- emission displays, and gas sensors. Recently, the interest in short wavelength display device is on the increase. In this regard, ZnO is a promising material[1-6]. High quality ZnO films have been prepared by many methods such as sputtering[7], reactive thermal and electron-beam evaporation[8], pulse laser deposition[9], chemical v…     

Antireflective characteristics of triangular shaped gratings

It is well known that conventional multi-layers are oftenused for antireflective coatings[1,2]. There are, however,only a handful of optical materials available, thus limit-ing the performance that could ideally be achieved. Onthe other hand, sub-wavelength structure surfaces, whichare surface-relief gratings with periods smaller than theincident wavelength, have been researched and foundto have antireflective properties[3,8]. Compared withstandard optical thin-film coating technologies, the h…     

Effect of Microstructure of TiO2 Thin Films on Optical Band Gap Energy

TiO2 coatings are prepared on fused silica with conventional electron beam evaporation deposition. After annealed at different temperatures for four hours, the spectra and XRD patterns of TiO2 thin film are obtained. XRD patterns reveal that only anatase phase can be observed in TiO2 coatings regardless of the different annealing temperatures, and with the increasing annealing temperature, the grain size gradually increases. The relationship between the energy gap and microstructure of anatase is determined and discussed. The quantum confinement effect is observed that with the increasing grain size of TiO2 thin film, the band gap energy shifts from 3.4 eV to3.21 eV. Moreover, other possible influence of the TiO2 thin-film microstructure, such as surface roughness and thin film absorption, on band gap energy is also expected.     

基于壁面反射增强模型的熔石英刻蚀形貌形成机理研究

大气等离子体刻蚀是一种非接触式、材料去除可控的加工方法,在光学元件的高精度加工中具有广泛的应用前景。但是大气等离子体刻蚀后元件存在表面形貌恶化的问题,严重影响元件的性能和使用寿命。进行氢氟酸刻蚀实验,证明了元件表面形貌的恶化是由氟碳化合物和表面凹坑微结构两个原因引起的。为了解释表面凹坑微结构的形成,提出基于micro-mask壁面反射增强理论的凹坑形成模型,并开展了样品表面旋涂金纳米颗粒充当micro-mask的刻蚀实验。实验结果验证了micro-mask壁面反射增强模型的正确性,为解决大气等离子体刻蚀后元件表面形貌恶化问题提供了新的思路和方法。     

用e+e－→h′s反应中类双喷注事例研究部分子末态的色联接

借助JETSET事例产生器对e⁺e^－→h′s反应中的类双喷注事例进行研究.研究发现,在QCD微扰与非微扰的界面上,部分子系统的色中性流和色分离单态两种不同色联接方式导致了强子末态某些可观测量的显著差别.因此,它们可以用于判别部分子的色联接方式.     

二极管伏安特性曲线测试电路的改进

指出了文献中所给出的伏安法测二级管特性曲线电路存在的问题，并给出了改进电路。     

Transient optical properties in fused silica measured by time-resolved high-power laser photometer

A time-resolved high-power laser photometer, which measures the real-time variations of transmission, internal reflection, and scattering simultaneously with picosecond time resolution, was developed to investigate the material response sequence during high-power nanosecond laser irradiation in thick fused silica. It was found that the transient transmission decreased sharply, accompanied by an increase in internal reflection at the rising edge of the laser pulse. The transient transmission recovered, while laser damage did not occur, but it did not recover if the scattering increased, indicating the occurrence of laser damage. The reason for the sharp decrease of transmission and the relationship between the transmission drop and laser damage were discussed.     

基于Cu/SiO_x/Al结构的阻变存储器多值特性及机理的研究

采用氧化硅材料构建了Cu/SiOx/Al的三明治结构阻变存储器件.用半导体参数分析仪对其阻变特性进行测量,结果表明其具有明显的阻变特性,并且通过调节限制电流,得到了四个稳定的阻态,各相邻阻态的电阻比大于10,并且具有良好的数据保持能力.在不同温度条件下对各个阻态进行电学测试及拟合,明确了不同阻态的电子传输机理不尽相同:阻态1和阻态2为欧姆传导机制,阻态3为P-F(Pool-Frenkel)发射机制,阻态4为肖特基发射机制.根据电子传输机制,建立了铜细丝导电模型并对Cu/SiOx/Al阻变存储器件各个阻态的电致阻变机制进行解释.     

生物质基活性炭负载镍对CrⅥ的催化吸附性能研究

为了有效处理污水中的重金属铬,本文利用废弃物甘蔗渣负载镍和氮,制备出一种高催化性能的活性炭用于降解吸附污染水体中的Cr~Ⅵ.利用BET、SEM、Raman、XRD、XPS等手段对负载镍生物质基活性炭进行理化性质表征,对其催化吸附Cr~Ⅵ的性能进行评估并探究了其催化吸附机理。结果表明,在甲酸作为辅助催化剂时,负载镍生物质基活性炭对Cr~Ⅵ的最大降解量高达824.38mg/g,并且循环性能优良,活性位点有较高稳定性。而其催化吸附过程涉及到含氧官能团与Cr的络合作用、单质镍与Cr~Ⅵ氧化还原反应、Ni~(3+)和Cr~(3+)共沉淀等作用。