球形钴酸锂的乳液法合成及其结构、性能研究

采用一种特殊乳液法, 制备了锂离子电池正极材料球形LiCoO₂. 分别研究了一次颗粒尺寸、烧结时间对于二次造粒的影响. 还对LiCoO₂球体内部的结构进行了SEM和HRTEM研究, 发现一次颗粒非常紧密地融合在一起, 晶体边界区域没有明显的非晶相区, 也没有纳米级别的孔洞、裂缝. 电化学性能研究表明, 在900 ℃烧结4 h的材料具有较高的首次放电容量(143 mAh•g^－1)和良好的循环性能     

希土烯丙基化合物的合成——Ⅱ.镥、钆的烯丙基化合物的合成

本文合成了两个新的对空气极敏感的希土烯丙基化合物,由无水希土氯化物与希丙基锂在四氢呋喃—乙醚中反应制得。产物经元素分析、红外光谱等确定其组成为:Li₂Ln(C₃H₅)₅·3Dioxane(Ln=Gd,Lu)。     

龋病人牙釉质表面硬度及抗磨损性能测试

采用人工方法制成人牙釉质浅龋及使用抗龋措施的龋损釉质样本，分别测量各组釉质表面显微硬度，并以微动摩擦磨损试验机测试其抗磨性能，试验结果表明：各组实验组釉质较对照组表面硬度都有不同程度下降，氟化钠前处理会使釉质表达硬度显著下降，人工浅龋牙釉质的抗磨损性能不如正常釉质，使用两种抗龋措施对其抗磨性能没有明显改善。     

Bioinspired manganese complexes catalyzed epoxidation for the synthesis of the epoxyketone fragment of carfilzomib

We report herein an efficient catalytic epoxidation reaction for the synthesis of epoxyketone (tert-butyl ((S)-4-methyl-1-((R)-2-methyloxiran-2-yl)-1-oxopentan-2-yl)carbamate), which is an important synthetic intermediate of carfilzomib.     

SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS*

Mesoporous poly (styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis wasachieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymerin the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template orpore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m~2/g) andpore volumes (e.g. 0.6 cm~3/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, porevolumes and pore diameters of the hybrid materials increase.     

有机锗（Ge—132）对交警健康作用的研究

初步观察了给交警服用Ｇｅ－１３２的效果，表明Ｇｅ－１３２有一定保健作用。     

Synthesis of alpha-MoTe2 nanorods via annealing Te-seeded amorphous MoTe2 particles

Semiconductor alpha-MoTe2 nanorods have been synthesized by annealing Te-seeded particles of an amorphous MoTe2 intermediate. This intermediate is prepared by a solution reaction between Mo(CO)6 and elemental Te in diphenylmethane. The as-synthesized products were characterized by structural, compositional, and morphological techniques of X-ray diffraction, selected area electron diffraction, selected area energy dispersive spectroscopy, energy dispersive X-ray analysis, X-ray photoelectron spectroscopy, transmission electron microscopy, and high-resolution transmission electron microscopy. The results of the annealing process are MoTe2 nanorods with diameters of 50-200 nm and lengths ranging from 0.1 to 3.0 microm. Here, the rodlike structure of MoTe2 is reported for the first time, and added to the list as one kind of new morphology of MoTe2 nanomaterials. A mechanism for the formation of the nanorods is proposed. The sandwich-layered structure of Te-Mo-Te and the similarity in the structure between hexagonal alpha-MoTe2 and hexagonal Te are responsible for the formation of nanorods of MoTe2.     

羧酸铜催化反应的研究——Ⅰ.羧酸铜催化醛肟转变为睛

本文报道了在多种羧酸铜催化下,醛肟在含有氰基的溶剂中(如CH_3CN、CH_3OCH_2CH_2CN等),均可脱水转变成相应的腈。反应条件温和,产率较高。具有不同空间和电性效应取代基的羧酸铜对反应的产率影响不大。实验中还发现溶剂乙腈参与了上述反应。     

Fine structures of zeolite-Linde-L (LTL): surface structures, growth unit and defects

High-resolution electron microscopy (HREM) has been used to image the surface structure of nano- and micrometer-sized synthetic crystals of zeolite-Linde-L (LTL). Columnar holes and rotational, nano-sized, wheel-like defects were observed within the crystals, where the hole has a minimum size equal to that of the rotational defect. Predictions of surface structure from atomistic computer simulation concur with the observations from HREM and provide insight into the crystal growth mechanism of perfect and defective LTL. Analysis of the energetics of the formation of rotational defect structures reveals that the driving force for defect creation is thermodynamic and furthermore, the rotational defects could be created in high concentrations. Formation of a columnar hole is found to be slightly energetically unfavourable and therefore we speculate that the incidence of both rotational and nano-sized vacancy defects is strongly dependent on kinetic factors and reaction conditions. The morphology of nano- and microcrystalline LTL is contradistinct and we use insights from simulation to propose an explanation of the disparity in crystal shape.     

Analysis of guanidine in high salt and protein matrices by cation-exchange chromatography and UV detection

A simple and sensitive HPLC method for quantitative determination of guanidine in high salt and protein matrices was developed. The HPLC system consisted of an Agilent 1100 pump with an online degasser, a UV detector, an autosampler, and Dionex CS 14 cation-exchange guard (4 mm x 50 mm) and analytical (4 mm x 250 mm) columns. The mobile phase was 3.75 mM methanesulfonic acid (MSA) with a flow rate of 1 mL/min. The other analysis parameters were: 50 microL injection volume, 195 nm UV detection, and 21 min runtime. The limit of quantitation (LOQ) for guanidine HCl was determined to be 0.25 mg/L and the standard curve ranged from 0.25 mg/L to 10 mg/L. Sample preparation was required for the samples containing high protein concentrations. Proteins were removed by centrifuging a sample in a 30 K NanoSep centrifugal filter at 15,300 x g for 20 min. The method could determine guanidine accurately in sample matrices containing up to 200 mM sodium ion or up to 50 mM potassium ion. The method can be used for clearance testing of guanidine in biopharmaceutical products.