排序方式: 共有157条查询结果,搜索用时 296 毫秒
81.
以形成线储能结合脉冲压缩方式产生数MV高压输出,是脉冲功率系统中常见的技术途径,其中绝缘堆是该类装置工程成败的关键。分析了几种径向均压绝缘堆的均压机制,基于静电场分析程序对径向均压绝缘堆结构进行了优化设计,给出了径向电阻的设计方法。研究表明:采用均压环且均压环与径向电阻电气接触的绝缘堆结构可以获得较均匀的径向电场分布,而径向电阻是绝缘堆设计的关键。在有效作用时间100ns的4.5MV加载电压下,优化设计的绝缘堆阴极三相点电场控制在25kV/cm,Martin电场约120kV/cm,低于理论击穿值。 相似文献
82.
83.
84.
Spot size is one of the parameters to characterize the performance of a radiographic X-ray source. It determines the degree of blurring due to magnification directly. In recent years, a variety of measurement methods have been used to diagnose X-ray spot size at Laboratory of Accelerator Physics and Application (LAPA). Computer simulations and experiments showed that using a rolled-edge to measure the spot size are more accurate, and the intensity distribution of X-ray source was obtained by a device with a square aperture. Experimental and simulation results on a flash X-ray source at our laboratory are presented and discussed in this paper. In addition, a new method for time resolved diagnostics of X-ray spot size is introduced too. 相似文献
85.
爆炸驱动铁电体脉冲电源利用铁电陶瓷在冲击压力作用下去极化释放电荷而产生电流,可以作为脉冲功率源的初始电源,也可直接驱动高阻抗负载产生脉冲高电压。通常情况下,铁电陶瓷可以看作理想的绝缘体,但在数GPa冲击波压力作用下,铁电陶瓷电阻率可能会明显下降并形成漏电导,使部分去极化释放电荷在铁电陶瓷内部流失,导致铁电陶瓷剩余极化电荷输出效率下降。以PZT95/5铁电陶瓷作为初始储能介质,以爆炸冲击波加载PZT95/5铁电陶瓷释放电荷对脉冲电容器充电,充电结束后电容器电压维持期间检测到明显的反向电流,根据铁电陶瓷输出电流和工作电压,得到冲击波作用过程中铁电陶瓷的瞬态电阻率曲线,并分析了电阻率下降对输出电荷的影响。进一步研究表明,冲击压力在铁电陶瓷边侧产生的稀疏波是引起电荷输出效率降低的主要因素,而铁电陶瓷电阻率下降对电荷输出效率的影响很小。 相似文献
86.
Mini-LIA is a miniature of a linear induction accelerator developed by China Academy of Engineering Physics and Tsinghua University in 2007. It has been constructed with a thermionic cathode in an electron injector and a metglas core in the induction accelerator cavities. A double-pulsed electron beam was produced for the first time in China on the Mini-LIA with a thermionic cathode in the electron gun and a metglas core in the induction accelerator cavities. A double-pulsed beam current of more than 1.1 A was obtained on condition of 80 k V double-pulsed high voltage produced by pulsed power system supplying to the injector and accelerating modules. Some primary experiments for measuring the parameters of Mini-LIA has been performed, and some beam characterizations of Mini-LIA are presented. Further improvement is underway. 相似文献
87.
为了实现高压脉冲形成线小型化,开展了平板固态脉冲形成线研究。实验研究了两种作为储能介质的固态材料的高压体击穿特性、沿面闪络特性和频率响应特性,一种是特种复合材料,其相对介电常数在50~250之间,另一种是功能陶瓷,其相对介电常数在200~1 000之间。在此基础上,研制了两种平板固态脉冲形成线。特种复合介质固态脉冲形成线试验电压为3 kV左右,输出电压脉冲半高全宽(FWHM)可以达到58 ns;功能陶瓷介质固态脉冲形成线的试验充电电压超过120 kV,输出电压脉冲半高全宽为92 ns。 相似文献
88.
Rod-Pinch二极管(RPD)在小尺度闪光照相方面具有良好的应用前景. 根据理论方面的研究结果以及实验室具备的驱动源装置水平, 设计了相应结构的RPD, 并在1MV工作电压下开展了较为详细的性能实验研究. 最终在二极管轴向(0°方向)1m处得到的X光剂量为1.21rad—1.45rad. 对于阳极直径为1mm的二极管, 其X光焦斑直径仅为0.8mm—1.1mm. X光信号的脉宽为18.1ns—27.5ns. 研究表明RPD将是一种用于小尺度闪光照相的理想的X光源. 相似文献
89.
90.
神龙1号直线感应加速器由注入器输运段、加速段、聚焦段等3个部分组成。整个束传输线从阴极发射面算起到轫致辐射靶结束,全长约48m,其间数千安培的强流脉冲电子束经过约170mm的二极管加速区,电子能量达到约3.6MeV,再经过4.5m的无加速场漂移区到达注入器出口,随后进入到长38.5m的加速段,在加速段出口时电子能量不低于18MeV;然后进入到长约3.8m的无加速漂移段,经过调整后通过两级磁透镜的聚焦将电子束聚焦到轫致辐射靶上产生X射线。整个束传输线使用了100多个螺线管线圈(包括两个磁透镜)约束电子束的横向发散, 相似文献