New experimental measurement of natSe(n, γ) cross section between 1 eV to 1 keV at the CSNS Back-n facility

The ⁷⁴Se is one of 35 p-nuclei, and ⁸²Se is a r-process only nucleus, and their (n, γ) cross sections are vital input parameters for nuclear astrophysics reaction network calculations. The neutron capture cross section in the resonance range of isotopes and even natural selenium samples has not been measured. Prompt γ-rays originating from neutron-induced capture events were detected by four C₆D₆ liquid scintillator detectors at the Back-n facility of China Spallation Neutron Source (CSNS). The pulse height weighting technique (PHWT) was used to analyze the data in the 1 eV to 100 keV region. The deduced neutron capture cross section was compared with ENDF/B-VIII.0, JEFF-3.2, and JENDL-4.0, and some differences were found. Resonance parameters were extracted by the R-matrix code SAMMY in the 1 eV-1 keV region. All the cross sections of ^natSe and resonance parameters are given in the datasets. The datasets are openly available at http://www.doi.org/10.11922/sciencedb.j00113.00019.     

陶瓷和金属微波烧结在线实验及微观机理分析

为研究陶瓷和金属微波烧结时的微观演化机理,从而为优化不同材料的烧结过程提供依据,本文采用同步辐射技术对陶瓷(SiC)和金属(Al)的微波烧结微结构演化过程进行实时、无损的观测,并结合有限元模拟分析两者的微结构演化特征及微观机理。通过滤波反投影等数字图像处理技术得到烧结过程中样品内部的二维、三维重建图像,清晰地观察到SiC和Al在颗粒表面和界面演化上存在差异。定量地统计了陶瓷和金属烧结颈相对尺寸与时间的双对数关系,并与陶瓷和金属双球模型的微波烧结模拟结果进行了对比。运用模拟分别对实验中的烧结颈和微观形貌演化进行分析,得出结论:陶瓷和金属微波烧结时的加热机制不同,分别为整体介质损耗加热和表面涡流损耗加热。陶瓷的整体加热将会在材料内部特别是界面产生较高的温度,而金属的表面加热使颗粒表面温度高于界面。由相应的加热机制产生的温度分布差异,将会对材料的物质扩散过程产生不同程度的影响,进而产生不同的微结构。     

基于Android的SIP远程视频监控系统的设计

本文利用SIP协议建立组呼来控制监控摄像头,从而建立多路远程视频监控系统。论文介绍了基于Android系统的SIP协议栈JAIN-SIP和远程视频监控系统架构,阐述了利用SIP扩展消息完成组呼控制,从而实现监控中心对远端监控摄像头的呼叫控制。     

急性心肌梗死患者D-二聚体、cTnT及心肌酶谱联合检测的临床意义

为探讨急性心肌梗死患者D-二聚体、肌钙蛋白及心肌酶谱联合检测的临床意义,选择30例健康者（对照组）和100例患者（病例组）进行D-二聚体、肌钙蛋白及心肌酶谱（AST、LDH、CK、CK-MB）检测,并把100例患者（病例组）分为3组,分别为36例AMI组,34例不稳定型心绞痛（UAP）组,30例稳定型心绞痛（SAP）组。结果表明,AMI组及UAP组中D-二聚体、肌钙蛋白及心肌酶谱（AST、LDH、CK、CK—MB）的升高程度较SAP组和健康对照组显著增高（P〈0．05）;AMI组肌钙蛋白（cTnT）较UAP组明显增高（P〈0．05）;UAP组肌钙蛋白（cTnT）较对照组明显增高（P〈0．05）;D-二聚体、肌钙蛋白及心肌酶谱（AST、LDH、CK、CK—MB）的升高程度与心肌梗死的面积正相关（P〈0．01）。提示D-二聚体、肌钙蛋白及心肌酶谱（AST、LDH、CK、CK—MB）联合检测有助于急性心肌梗死诊断的提高。     

带官能团的双有机碘化锌试剂与酰氯的反应研究

探索了带醚键、酯基、羰基的双有机锌试剂的制备及其在CuCN 2LiCl存在下和酰氯的反应,得到了带官能团的二酮类化合物.该方法条件温和,操作简便,产率中等,提供了合成带官能团的长链二酮类化合物的一种简便方法.     

Ferroferric oxide/chitosan scaffolds with three-dimensional oriented structure

A facile approach to construct ferroferric oxide/chitosan composite scaffolds with three-dimensional oriented structure has been explored in this research.Chitosan and ferroferric oxide are co-precipitated by using an in situ precipitation method,and then lyophilized to get the composite scaffolds.XRD indicated that Fe₃O₄ was generated during the gel formation process,and increasing the content of magnetic particles could destruct the crystal structure of chitosan. When the content of magnetic particles is lower than 10%,the layer-by-layer structure and wheel spoke structure arc coexisting in the scaffolds.Increasing the content of magnetic particles,just layer-by-layer structure could be observed in the scaffolds.Ferroferric oxide particles were uniformly distributed in the matrix,the size of which was about 0.48μm in diameter,2μm in length.Porosity of magnetic chitosan composite scaffolds is about 90%.When the ratio of ferroferric oxide to chitosan is 5/100,the compressive strength of the material is 0.4367 MPa,which is much higher than that of pure chitosan scaffolds,indicating that the layer-by-layer and wheel spokes complex structure is beneficial for the improvement of the mechanical properties of chitosan scaffolds.However,increasing the content of ferroferric oxide,the compressive strength of scaffolds decreased,because of the decreasing of chitosan crystallization and aggregation of magnetic particles as stress centralized body.Another reason is that the layer-by-layer and wheel spokes complex structure makes bigger contributions for the compressive strength than the layer-by-layer structure does.Three-dimensional ferroferric oxide/chitosan scaffolds could be used as hyperthermia generator system,improving the local circulation of blood, promoting the aggradation of calcium salt and stimulating bone tissue regeneration.     

金掺杂锯齿型石墨烯纳米带的电磁学特性研究

本文采用基于密度泛函理论的第一性原理计算了金原子填充锯齿型石墨烯纳米带 (ZGNRs)中双空位结构的电磁学特性. 计算结果表明: 边缘位置是金原子的最稳定掺杂位置, 杂质原子的引入导致掺杂边缘的磁性被抑制, 不过掺杂率足够大时, 掺杂边缘的磁性反而恢复了. 金掺杂纳米带的能带结构对掺杂率敏感: 随着掺杂率的增大, 掺杂纳米带分别表现半导体特性、半金属特性以及金属特性. 本文的计算表明金原子掺杂可以调制ZGNR的磁性以及能带特性, 为后续实验起指导作用, 有利于推动石墨烯材料在自旋电子学方面的应用.     

基于液面旋转平移法的绝对检验技术研究

绝对检验作为一种光学元件高精度检测方法,其中的两平晶绝对检验无法精确测量平移过程中的倾斜误差,导致恢复的面形中二次项出现偏差.液面在位置变化前后能够保持水平,在旋转平移过程中不会产生倾斜误差.推导了平移过程中倾斜误差和恢复面形中离焦项的关系,并通过仿真分析加以验证,当不存在倾斜误差时,残差面PV值小于1nm.在300m...     

基于气候变化综合指数的中国近50年来气候变化敏感性研究

气候变化指数是目前有关气候变化研究领域的前沿课题, 国内外在气候变化研究领域存在着许多具体指数,但关于综合指数的研究却非常少见. 本文将基于温度和降水的单一要素指数的气候变化信息进行综合, 得到一个综合气候变化指数CCI (climate change index)以评估中国近50年来的气候变化及其区域敏感性.指数大小表征气候突变前后极端气候事件的频数之差, 反映该地区应对气候变化的能力,反映该地区对气候变化的敏感性. 通过该指数可以获得多种气候变化的相关信息,从而为更好地应对极端气候事件提供判断依据. 研究结果显示,内蒙古大部、东北中部、云南以及西北中部等地CCI指数较大, 说明这些地区相对于气候突变之前极端气候事件频发. 中国各个省份中的所有站点的CCI指数平均值表明,中国江南和西南东部对气候变化不敏感; 华北和东北地区极端气候事件频发.气候变化在高纬度地区和热带、 亚热带地区表现明显,北方和西南比较敏感,而黄河以南敏感性较弱, 沿海地区由于受季风及台风带来的强降水的影响, CCI指数相对偏大,敏感性较强.     

Stark位移对热环境下双Jaynes-Cummings模型中原子纠缠的影响

研究双光子跃迁的双Jaynes-Cummings模型中, 两原子初始处于最大纠缠态、光场初始处于单模热态时的原子纠缠动力学, 考虑双光子过程中的Stark位移、热光场的平均光子数对原子纠缠的影响. 结果表明: 不考虑Stark位移时, 两原子在系统演化过程中周期性地出现退纠缠现象, 而考虑Stark位移时, 两原子长时间地纠缠. 特别是当Stark位移参数取值较大且热光场的平均光子数值比较小时, 两原子能保持 稳定地纠缠. 这些结果表明, 可以利用Stark位移对热环境下双Jaynes-Cummings模型中的原子纠缠进行调控.