各向异性压电陶瓷材料

本工作制备了添有少量Pb(Zn_(1/3) Nb_(2/3))O_3,Bi(Zn_(1/2) Ti_(1/2))O_3和MnO_2的高电阻率,高密度的改性(PbCa)TiO_3压电陶瓷。这种陶瓷在150℃和施加40—50kV/cm电场条件下极化之后显示出大的各向异性压电特性。它具有高的厚度扩张模式机电藕合系数Kt,高的机械品质因素Qm低的介电常数,而平面耦合系数Kp值极小。于是,这种新的压电材料适于制作高频陶瓷滤波器超声换能器,金属探伤检测器,以及声表面波器件等。     

激光感生色散光学滤波理论

利用半经典理论，建立了激光感生色散光学滤波的理论模型.通过求解密度矩阵方程，得到 感生极化率.并利用该理论计算出钾694 nm激光感生色散光学滤波器的透射谱，与发表的实 验结果基本符合. 关键词： 激光感生色散光学滤波 透射谱 极化率     

实施单点接地提高电梯运行的可靠性

介绍了噪音对电梯的影响、噪音的来源，详细介绍了实施单点接地的方法提高电梯运行的可靠性。     

Improvement of Properties of p-GaN by Mg Delta Doping

The Mg-delta-doped GaN structure has been grown by low-pressure metalorganic chemical vapour deposition.The Hall-effect measurements reveal that the electrical properties are enhanced. The hole concentration is enhanced twice and hole mobility is enhanced three times by Mg-delta doping. Both the etch pit density data and the x-ray diffraction data demonstrate that Mg-delta doping can reduce the threading dislocation density of p-type GaN epilayer.     

胆汁中游离胆红素的光谱测定

本工作建立了胆汁中游离胆红素的光谱测定法。本方法克服了干扰问题,考虑了溶剂的萃取效率,提出了反映胆汁性质的一个新指标α值。用本方法考察了正常胆汁和色素类结石病人胆汁标本中游离胆红素的含量,为成石因素研究提供了实验数据。     

工作在K波段的GaAsFET

据报导用最新的GaAsFET可和新的InP耿效应器相竞争。 根据Varian研究小组报导,至少在18.5～26千兆赫下性能非常好。由M·N等人设计的单级放大器证明,18.5～20.5千兆赫频段的增益为9±1分贝,23～26千兆赫频段的增益达8±1分贝。调准最小的中波段噪声系数,末尾的放大器显示了在24千兆赫下噪声系数5.6分贝,并有振荡增益5.0分贝。     

径流过程的广义Hammersstein模型及其辨识

本文针对一类水文随机模拟系统的参数辨识问题,提出了一种广义 Hammerstein辨识方法,讨论了广义Hammerstein函数的构造问题。文中给出了两个日径流系统辨识的实际例子。     

过渡金属醋酸盐与邻菲咯啉的室温固相配位化学反应研究

本文研究了Ｃ０（Ａｃ）２·４Ｈ２Ｏ，Ｎｉ（Ａｃ）２４Ｈ２Ｏ，Ｃｕ（Ａｃ）２·Ｈ２Ｏ，Ｚｎ（Ａｃ）２·２Ｈ２Ｏ与邻菲咯啉在室温（２０土２℃）条件下的固相配位化学反应，讨论了反应物分子结构对固相反应的影响，通过固相反应一步合成了相应的配合物，经元素分析、红外光谱，Ｘ－射线衍射测定，确定了固相合成产物的组成。     

ON DYNAMIC OPTIMIZATION OF TIMOSHENKO BEAM

The present paper discusses the minimum weight design pro-blem for Timoshenko and Euler beams subjected to multi-frequ-ency constraints.Taking the simply-supported symmetric beamas an example,we reveal the abnormal characteristics of op-timal Timoshenko beams,i.e.,the frequency corresponding tothe first symmetric vibration mode could be higher than thefrequency of antisymmetric vibration mode if a very thin andhigh strip is suitably formed at the middle of the beam.and,optimal Timoshenko beams subjected to two different sets offrequency constraints could have the same minimum weight.Theabove abnormal characteristics demonstrate the need for in-cluding maximum cross sectional area constraint in the problemformulation in order to have a well-posed problem.