Mixed C18 and C1 modification on an optical fiber for chromatographic sensing

An optical fiber-chromatographic sensor, aiming at simultaneous and selective response to multiple components following a chromatographic separation, is described. We report an improved approach for immobilization of octadecyl (C(18)) and methyl (C(1)) moieties as stationary phase on an optical fiber suitable as a sensing phase for organic solutes. By this approach, the stability and lifetime of the sensing layer as well as the detectability and retention behavior of the chromatographic sensor could be improved. Infrared spectroscopy was employed to confirm the presence of C(18) and C(1) moieties on the modified surface of the optical fiber. The chromatographic sensor was applied, with good sensitivity and chemical selectivity, to the simultaneous separation and detection of bromobenzene and toluene, using water as the mobile phase.     

Electronic properties of polyoxometalates: a DFT study of alpha/beta-[XM(12)O(40)](n-) relative stability (M=W, Mo and X a main group element)

Keggin heteropolyanions [XM(12)O(40)](n-) have various isomeric structures, alpha and beta being the most common. Conventionally, the alpha structure appears to be the most stable, but calculations carried out at the DFT level for X = P(V), Si(IV), Al(III), As(V), Ge(IV), and Ga(III) and M = W(VI) and Mo(VI) show that this stability depends on several factors, particularly on the nature of the heteroatom (X) and the total charge of the cluster. In this paper, we apply the clathrate model to the Keggin molecule to carry out a fragment-interaction study to elucidate when and why the traditional relative stability of various isomers can be inverted. The fully oxidized anions that have inverted the traditional stability trend in this series are [AlW(12)O(40)](5-) and [GaW(12)O(40)](5-), both of which contain a third-group heteroatom and an overall charge of -5. beta-isomers are always more easily reduced than alpha-isomers. This experimental observation suggests that reduction favors the stability of beta-isomers and one of the most important results of this study is that the alpha/beta inversion is achieved in most cases after the second reduction. The alpha- and beta-isomers may have different properties because the energy of the LUMO, a symmetry-adapted d(xy)-metal orbital, is different.     

Robust core-shell supramolecular assemblies based on cationic vesicles and ring-shaped [Mo154] polyoxomolybdate nanoclusters: template-directed synthesis and characterizations

Substantial progress has been made recently in extending the supramolecular assembly of biomimetic structures to vesicle-based sophisticated nanocomposites and mesostructures. We report herein the successful preparation of unilamellar surfactant vesicles coated with a monolayer of ring-shaped [Mo(154)] polyoxometalate (POM) nanoclusters, (NH(4))(28)[Mo(154)(NO)(14)O(448)H(14)(H(2)O)(70)]. approximately 350 H(2)O, by coulomb attractions using preformed didodecyldimethylammonium bromide (DDAB) surfactant vesicles as templates. The resultant vesicle-templated supramolecular assemblies are robust (they do not disintegrate upon dehydration) both at room-temperature ambient and vacuum conditions, as characterized by conventional transmission electron microscopy (TEM) and atomic force microscopy (AFM). The flexibility of the complex soft assemblies was also revealed by AFM measurements. The effect of POM-vesicle coulomb attractions on the dimensions of the templating vesicles was also investigated by using dynamic light scattering (DLS). Although origins of the structure stability of the as-prepared supramolecular assemblies are not clear yet, the nanometer scale cavities and the related properties of macroions of the POM clusters may play an important role in it.     

New pi-extended water-soluble squaraines as singlet oxygen generators

[graph: see text] Condensation of squaric acid with a number of differently substituted 2-pyrrolyl derivatives afforded three new classes of squaraines. Their sharp and intense absorption bands in the biological window (700-900 nm), inherent singlet oxygen generation capabilities, together with proper functionalization allowing good water solubility make them suitable candidates as new non-porphyrinic singlet oxygen photosensitizers for photodynamic therapy (PDT).     

Synthesis of monodisperse poly(chloromethylstyrene-co-divinylbenzene) beads and their application in separation of biopolymers

The monodisperse, porous poly(chloromethylstyrene-co-divinylbenzene) beads of 7.9 microm were prepared by a single-step swelling and polymerization method. The seed particles prepared by dispersion polymerization exhibited good absorption of the monomer phase. Based on this media, a weak cation-exchange (WCX) stationary phase for HPLC was synthesized by a new chemically modified method. The prepared resin has advantages of biopolymer separation, high column efficiency, low column backpressure, high protein mass recovery, and good resolution for proteins. The dynamic protein-loading capacity of the synthesized WCX packings was 18.2 mg/g. Five proteins were separated in 3.0 min using the synthesized WCX stationary phase. The experimental results show that the obtained WCX resin has very weak hydrophobicity. The WCX resin was also used for the rapid separation and purification of lysozyme from egg white in 5.0 min with only one step. The purity and specific bioactivity of the purified lysozyme were found to be more than 93% and 70 245 U/mg, respectively.     

Structural characterization of Acetobacter diazotropicus levansucrase by matrix-assisted laser desorption/ionization mass spectrometry: identification of an N-terminal blocking group and a free-thiol cysteine residue

High-resolution matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was used to characterize the primary structure of the levansucrase (EC 2.4.1.10) secreted by Acetobacter diazotropicus SRT4. The technique permitted not only the reading frame of this enzyme, the amino acid sequence of which was deduced from DNA, but also the elucidation of an N-terminal blocking group and the position of a disulfide bridge between Cys309 and Cys365 among the three Cys residues. A free cysteine (Cys127) was identified by modifying an intact molecule with a sulfhydryl reagent, 5-(octyldithio)-2-nitrobenzoic acid, under non-reducing conditions. In addition, the enzyme obtained by site-directed mutagenesis at Asp279 to Asn279 was also identified by the above methods. Post-source decay analysis of the tryptic peptide containing the mutation site unequivocally revealed an Asn residue at position 279.     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.     

Supercritical fluid extraction for liquid chromatographic determination of carotenoids in Spirulina Pacifica algae: a chemometric approach

An experimental design procedure was used to investigate the effects of some operating parameters on the supercritical fluid extraction of carotenoids beta-carotene, beta-cryptoxanthin and zeaxanthin from Spirulina Pacifica algae, a carotenoid-rich dietary product. Variables tested were temperature and pressure of the supercritical fluid, dynamic extraction time and percentage of ethanol added as the modifier. Each variable was tested at three levels; 31 experiments were performed in random order. Analyses of the extracts were performed by high-performance liquid chromatography with UV-Vis photodiode array detection. Analytical responses (chromatographic peak areas) were processed by using a stepwise multiple regression analysis, in order to find polynomial functions describing the relationships between variables and responses. For all the analytes the experimental conditions providing the highest extraction yield inside the experimental domain considered were found. Supercritical fluid extraction results obtained in these conditions were compared with those obtained by performing solvent extraction in order to evaluate the effectiveness of the supercritical fluid extraction procedure.     

Chelatometric titration of tin in non-ferrous alloys with hedta

A new titrimetric method for determination of tin (4%) in aluminium alloys, tin- and lead-base alloys, solders, white bearing alloys, special bronzes and silver brazing alloys is proposed. HEDTA, Semi-Xylenol Orange and bismuth perchlorate are used as titrant, indicator and back-titrant respectively. Measures are taken to overcome the hydrolysis of Sn(IV). Monochloroacetic acid and ethylene glycol are added as auxiliary agents. The standard deviation of this method was found to be 0.2 mg and its coefficient of variation to vary from 0.25 to 2%, according to amount of tin. A novel method of sample decomposition and a modified method for separating Sn(IV) are also suggested.     

Observation of a quadrupole plasmon mode for a colloidal solution of gold nanoprisms

The synthesis and optical properties of single crystalline gold nanoprisms have been investigated. A three-step mediated seed growth process in an aqueous solution generated gold nanoprisms with a relatively homogeneous size distribution. The purity of these nanostructures has allowed us to observe a weak quadrupole resonance in addition to a strong dipole resonance associated with these novel structures. The experimental optical spectra agree with discrete dipole approximation calculations that have been modeled from the dimensions of gold nanoprisms produced in this synthesis.