重庆轻轨较新线无线通信系统设计探讨

针对重庆特殊的地理环境，着重讨论重庆轻轨较新线无线通信系统应具备的功能和构成特点，对基站加光纤射频直放站系统模式，优化设计和节省投资方面进行了探讨。     

X-Ray Emission from Zr, Mo, In and Pb Targets Bombarded by Slow Highly Charged Ar^q＋（q = 13, 14, 15, 16） Ions

We study the L x-ray emission from Zr, Mo and In targets and M x-ray emission from Pb target under bombardment of low energy Ar^q (q = 13, 14, 15, 16) ions. The relative x-ray yields were measured in the projectile kinetic energy range 210-360 keV. It is found that the relative x-ray yields from Zr, Mo and Pb targets increase with the increasing projectile kinetic energy for Ar^14 and Ar^16 projectiles and depend on the potential energy of the projectile remarkably.     

固体摄象器件的发展趋势

本文重点介绍电荷耦合器件(CCD)的发展状况和最近出现的一些新器件的结构,如:虚相CCD摄象器;电荷引发器件摄象器;帧-行间转移CCD摄象器及具有三维集成电路雏型的叠层式CCD摄象器.     

n—型聚乙炔复合膜电极性能的研究

自MacDiarmid等将聚乙炔(PA)做为二次电池的电极材料以来,其电化学特性和行为引起了人们的极大兴趣.随后的研究表明,p-型PA[(CH)~(y )Ay~-]_x在电解液中不稳定,用ClO_4~-掺杂的PA充放循环时有降解发生.n-型PA[My~ (CH)~(y-)]_x(y≤0.10)在THF/LiClO_4电解质中较稳定,电化学还原完全可逆,目前已实现1100次充放循环.因此,它既可做电池的正极材料(碱金属为负极),又可做负极材料(TiS_2为正极).我们发现     

Ultra-longer fiber cantilever taper for simultaneous measurement of temperature and relative humidity

An ultra-longer fiber cantilever taper for simultaneous measurement of the temperature and relative humidity (RH) with high sensitivities was proposed. The structure was fabricated by using the simple and cost-effective method only including fiber cleaving, splicing, and tapering. The length of the cantilever taper is about 1.5 mm. The dip A and dip B were measured simultaneously, owing to the ultra-long length and super-fine size, the temperature sensitivities of the dip A and dip B reached as high as 127.3 pm/℃ and 0 pm/℃ between 25 ℃ and 50 ℃, and the RH sensitivities are -31.2 pm/% RH and -29.2 pm/% RH with a broad RH interval ranging from 20% RH to 70% RH. Besides, the proposed structure showed good linearity in the sensing process and small temperature crosstalk. It will be found in wide applications in environmental monitoring, food processing, and industries.     

Electronic and optical properties of 3N-doped graphdiyne/MoS2 heterostructures tuned by biaxial strain and external electric field

The construction of van der Waals (vdW) heterostructures by stacking different two-dimensional layered materials have been recognised as an effective strategy to obtain the desired properties. The 3N-doped graphdiyne (N-GY) has been successfully synthesized in the laboratory. It could be assembled into a supercapacitor and can be used for tensile energy storage. However, the flat band and wide forbidden bands could hinder its application of N-GY layer in optoelectronic and nanoelectronic devices. In order to extend the application of N-GY layer in electronic devices, MoS₂ was selected to construct an N-GY/MoS₂ heterostructure due to its good electronic and optical properties. The N-GY/MoS₂ heterostructure has an optical absorption range from the visible to ultraviolet with a absorption coefficient of 10⁵ cm^-1. The N-GY/MoS₂ heterostructure exhibits a type-Ⅱ band alignment allows the electron-hole to be located on N-GY and MoS₂ respectively, which can further reduce the electron-hole complexation to increase exciton lifetime. The power conversion efficiency of N-GY/MoS₂ heterostructure is up to 17.77%, indicating it is a promising candidate material for solar cells. In addition, the external electric field and biaxial strain could effectively tune the electronic structure. Our results provide a theoretical support for the design and application of N-GY/MoS₂ vdW heterostructures in semiconductor sensors and photovoltaic devices.     

部分均匀荷载作用下圆板塑性极限统一解

本文采用俞茂宏双剪统一屈服准则求解部分均匀荷载下简支圆板的塑性极限，已有的最大主应力准则、Ｔｒｅｓｃａ准则，Ｍｉｓｅｓ准则的解答均是该解答的特例或线性逼近。该解答可以适合于多种工程材料，具有普遍性和适用性，从得出的解析解和图示中可得出一些新的有益的认识     

全面优化本科教学平台,培养电气工程创新人才——浙江大学电气工程及其自动化特色专业建设

浙江大学电气工程及其自动化专业有电机系统及其控制与电力系统自动化2个专业方向。如何在同一本科教学大平台下,以＂宽、专、交＂的模式培养专业方向不同高素质的电气工程创新人才？我们提出＂1个平台、2个强化、2个关系、1个目标＂的思路,即优化电气工程本科教学大平台、强化学科基础和实践环节、解决好＂点与面＂和＂宽与专＂的关系、实现培养电气工程创新人才的目标。经过多年努力,在课程体系、课程建设、教材建设、实践教学、实验室建设、师资队伍建设等方面都取得了丰硕的成果,教学改革成效显著,提高了电气工程创新人才的培养质量。