表面等离激元耦合体系及其光谱增强应用

当入射电磁波频率与金属微纳米结构中自由电子的集体振荡频率相当时,金属微纳米结构中激发表面等离激元共振,其共振电磁场被强束缚在亚波长尺度以下界面附近,使其具备极大的电磁场局域能力.这一效应可以极大程度地增强电磁波与物质的相互作用,在金属表面等离激元耦合体系中尤为明显.本文简述了表面等离激元耦合效应、模式耦合理论以及对应的结构耦合体系.另外,还介绍了一类典型耦合体系在光谱增强中的重要应用,主要包括增强折射率传感、表面增强红外吸收、表面增强拉曼散射、表面增强光学非线性效应等.     

结合Sage-Husa滤波的合成孔径声呐多传感器组合运动补偿算法

在运动测量设备噪声统计特性不确定的情况下,提出结合Sage-Husa滤波的合成孔径声呐多传感器组合运动补偿方法。使用Sage-Husa卡尔曼滤波处理多种异类运动传感器的数据,自适应估计声呐速度的最优值,计算实际航迹与理想航迹之间的横荡误差和升沉误差,最后通过时延校正原始回波数据。仿真结果表明,Sage-Husa滤波对运动误差估计精度至少提高37%,运动补偿后,目标峰值旁瓣比和积分旁瓣比有所降低,峰值旁瓣比接近理论值.湖试数据处理结果表明,目标能量分散的情况有所改善,能量集中在主瓣,散焦得到抑制。Sage-Husa滤波在多传感器系统噪声先验知识缺失的条件下,能减小运动数据估计误差,提高运动补偿的准确性。     

色散管理掺铥光纤激光器高能量脉冲的产生

设计了一种基于色散管理的掺铥光纤激光器。通过调节泵浦功率以及腔内偏振态，首先实现了稳定的展宽脉冲输出，中心波长和脉冲宽度分别为1 939.4 nm和482 fs。最大输出功率为15 mW，对应的单脉冲能量为0.52 nJ。增加泵浦功率到645 mW时，通过适当调节偏振控制器可以实现类噪声脉冲锁模，中心波长为1 940.1 nm。所实现的锁模脉冲具有飞秒量级的尖峰以及皮秒量级的基底。最大输出功率为20.4 mW，相对应的单脉冲能量为0.7 nJ。相比于传统孤子，采用色散管理所实现的锁模脉冲具有更高的脉冲能量。此外，所设计的掺铥光纤激光器可作为理想的主振荡功率放大以及啁啾脉冲放大结构的种子源，进一步提高脉冲能量，拓展2 μm高能光纤激光器的实际应用。     

皮肤放射性损伤与氦氖激光治疗附23例报告

我们从1980年到1981年4月，对恶性肿瘤经放射治疗所引起的皮肤放射损伤，用氦氖激光治疗，资料完整的有23例。     

基于干涉仪测量的变形镜面形展平标定研究

为了全面地了解变形镜的性能,以便自适应光学系统更好地工作,进行了基于干涉仪测量的变形镜面形展平标定研究.首先,给变形镜的压电陶瓷驱动器施加一半的控制电压;再用Zygo干涉仪测得变形镜的面形,计算对应各个驱动器位置的镜面高度,并算得各个位置镜面高度相对平均镜面高度的偏差;最后,控制驱动器运动使偏差量为零.测试及实验表明,受压电陶瓷迟滞的影响,上述过程需要迭代4到6次镜面面形才会收敛到希望的准确度;对镜面周边无驱动器约束的21单元变形镜,展平之后其80%口径的面形接近λ/20(λ=632.8 nm);对镜面周边有驱动器约束的137单元变形镜,展平后的面形优于λ/50.在望远镜不同的观测条件下,该技术可以快速地对变形镜进行展平标定,以适应不同的工作环境.     

新型双通道Mach-Zehnder干涉仪多普勒测风激光雷达鉴频系统研究及仿真

Mach-Zehnder(M-Z)干涉仪可作为鉴频器件应用于多普勒测风激光雷达系统中.鉴于一般M-Z干涉仪的稳定性差,不易于调节的缺点,提出一种基于双棱镜结构的新型双通道M-Z干涉仪作为多普勒测风激光雷达鉴频器件.在进行探测原理分析的基础上,利用光学设计软件对其鉴频系统结构进行了参量优化设计和系统仿真.通过设定实验参量并进行光线追迹模拟仿真实验结果,应用反演理论获得了风速值.利用多普勒频移公式计算获得理论风速并与仿真结果进行了对比,结果表明反演仿真风速与理论风速值基本吻合,标准差为0.46m/s.此新型双通道M-Z干涉仪可以作为鉴频器件应用于多普勒测风激光雷达系统中,在光路的调节及提高系统稳定性上具有优势.     

Low-loss terahertz waveguide with InAs-graphene-SiC structure

We demonstrate a low-loss terahertz waveguide based on the InAs-graphene-SiC structure. By analyzing the terahertz waveguide proposed in this paper, we can obtain that it is the characteristic of a low transmission loss coefficient(αloss≈0.55 dB/m) for fundamental mode(LP01) when the incident frequency is larger than 3.0 THz. The critical radii of the inside and outside cylinders have been found for the high-quality transmission. The large inside radius and the high transmission frequency result in a flat transmission loss coefficient curve. As a strictly two-dimensional material, the double graphene surface rings perform better to improve the quality of transmission mode. These results provide a new idea for the research of the long-distance THz waveguide.     

Synthesis of Au nanorods in a low pH solution via seed-media method

The gold(Au) nanorods with various aspect ratios are obtained by a seed-media method in low pH growth solution.Transmission electron microscopy(TEM) and UV-visible spectrophotometry are utilized to characterize the Au nanorods,and the longitudinal absorption peak positions of Au nanorods show different shifting trends of the growth evolutions in various low pH(1～3) solutions. Other influential factors on the shape of Au nanorod are also systematically studied under low pH reaction condition. The positions of longitudinal peak shift between 600 nm and 900 nm, with the aspect ratios of Au nanorods varying from 2 to 5 both in the simulation and experimental results. The simulation results are in agreement with experimental ones.     

Templated synthesis of highly ordered mesoporous cobalt ferrite and its microwave absorption properties

Based on the nanocasting strategy, highly ordered mesoporous CoFe2O4 is synthesized via the ‘two-solvent’ impregnation method using a mesoporous SBA-15 template. An ordered two-dimensional(P6mm) structure is preserved for the CoFe2O4/SBA-15 composite after the nanocasting. After the SBA-15 template is dissolved by NaOH solution, a mesoporous structure composed of aligned nanoparticles can be obtained, and the P6 mm structure of the parent SBA-15is preserved. With a high specific surface area(above 90 m2/g) and ferromagnetic behavior, the obtained material shows potential in light weight microwave absorption application. The minimum reflection loss(RL) can reach-18 dB at about16 GHz with a thickness of 2 mm and the corresponding absorption bandwidth is 4.5 GHz.     

Role of excited states in the elliptically polarized harmonic generation

We theoretically investigate the contribution of the excited state to the ellipticity of the harmonics from H＋ at different orientation angles irradiated by a linearly polarized laser pulse. It is found that the first excited state has a significant influence to the ellipticity of the harmonics, and the contribution of higher excited states to the ellipticity can be neglected. Moreover, the conclusion is not dependent on the laser intensity.