3′″-羰基-2″-β-L奎诺糖基淫羊藿次苷Ⅱ的NMR数据解析

对3′″-羰基-2″-β-L-奎诺糖基淫羊藿次苷Ⅱ(3′″-carbonyl-2″-β-L-quinovosy licarisideⅡ),进行了1H和13C MNR检测,参考2″-O-鼠李糖基淫羊藿次苷Ⅱ(2″-O-rhamnosy licarisid Ⅱ)、淫羊藿次苷Ⅱ(icarisid Ⅱ)和淫羊藿苷(icariin)的1H、13C NMR数据,通过DEPT和1H-1H COSY、HSQC、HMBC等2D NMR技术对该化合物所有的1H和13C NMR信号进行了全归属和详细解析.     

(E)-3-[N-(α-苯乙胺)]-2-烯基-1-苯丙酮的合成及其研究

烯胺是一类重要的反应中间体,其在有机合成中有着广泛的应用.采用碳-氮转移法合成了结构稳定、不易转变为亚胺的手性烯胺化合物(E)-3-[N-(α-苯乙胺)]-2烯基-1-苯丙酮,并对产物进行了红外光谱及核磁共振氢分析,结果令人满意.     

Fluoxetine Hydrochloride的NMR数据解析

由美国Lilly公司开发的第二代抗抑郁症药物盐酸氟西汀（Fluoxetine hydrochloride），属于选择性5-羟色胺再摄取抑制剂（SSRI），除了用于治疗各类抑郁症，包括轻性或重性抑郁症，尤宜用于老年性抑郁症之外，对于强迫症、惊恐发作、贪食症、经前期焦虑等亦有很好疗效. Fluoxetine hydrochloride是一种双环化合物，与传统的三环类、杂环类或单胺氧化酶抑制剂抗抑郁药相比，具有疗效好、不良反应轻而少，安全性高、耐受性好等特点，目前已作为一线的抗抑郁药得到广泛应用. 本文对Fluoxetine hydrochloride进行了¹H NMR和¹³C NMR检测，并通过DEPT和¹H-¹H COSY、HMBC、HSQC等2D NMR技术对其¹H NMR和¹³C NMR数据进行了较为详细的解析和比文献[1]更为全面的NMR归属，为以后的分析鉴定提供更完善的依据.     

Isoscaling in Statistical Sequential Decay Model

A sequential decay model is used to study isoscaling, i.e. the factorization of the isotope ratios from sources of different isospins and sizes over a broad range of excitation energies, into fugacity terms of proton and neutron number, R21（N, Z） = Y2（ N, Z）/Y1（ N, Z） = Cexp（αN -βZ）. It is found that the isoscaling parameters α and β have a strong dependence on the isospin difference of equilibrated source and excitation energy, no significant influence of the source size on α andβ has been observed. It is found that α and β decrease with the excitation energy and are linear functions of 1/T and △（Z/A）2 or△（N/A）2 of the sources. Symmetry energy coefticient Gsym is constrained from the relationship of a and source △（Z/A）2, /3 and source △（N/A）2.     

Development of the Technique for Fabricating Submicron Moire Gratings on Metal Materials Using Focused Ion Beam Milling

A focused gallium ion （Ga＋） beam is used to fabricate micro/submicron spacing gratings on the surface of porous NiTi shape memory alloy （SMA ）. The crossing type of gratings with double-frequency （25001/mm and 50001/mm） using the focused ion beam （FIB） milling are successfully produced in a combination mode or superposition mode. Based on the double-frequency gratings, high-quality scanning electron microscopy （SEM） Moird patterns are obtained to study the micro-scale deformation of porous NiTi SMA. The grating fabrication technique is discussed in detail. The experimental results verify the feasibility of fabricating high frequency grating on metal surface using FIB milling.     

Electrochemical Deposition and Properties of ZnTe Nanowire Array

Pulsed electrodeposited technique is applied to fabricate ZnTe nanowire arrays with different diameters into the anodic alumina membrane in citric acid solution. The x-ray powder diffraction, scanning electron microscopy and transmission electron microscopy indicate that the high ordered, uniform and single-crystalline nanowires have been fabricated. The optical absorption spectra of the nanowire array show that the optical absorption band edge of the ZnTe nanowire array exhibit a blue shift compared with that of bulk ZnTe, and the nonlinear current-voltage characteristic is observed.     

Flat Supercontinuum Generation at 1550 nm in a Dispersion-Flattened Microstructure Fibre Using Picosecond Pulse

The generation of a flat supercontinuum of over 80nm in the 1550nm region by injecting 1.6ps 10 GHz repetition rate optical pulses into an 80-m-long dispersion-flattened microstructure fibre is demonstrated. The fibre has small normal dispersion with a variation smaller than 1.5 （ps·nm^-1·km^-1） between 1500 and 1650nm. The generated supercontinuum ranging from 1513 to 1591 nm has the flatness of ±1.5 dB and it is not so flat in the range of several nanometres around the pump wavelength 1552nm. Numerical simulation is also used to study the effect of optical loss, fibre parameters and pumping conditions on supercontinuum generation in the dispersion-flattened microstructure fibre, and can be used for further optimization to generate flat broad spectra.     

断言技术在SOC验证中的应用

主要阐述了基于断言技术新硬件验证平台用于实时监测设计描述是否违反了设计目标,提出了OVA的特点及应用,并以LCD controller的sharp接口时序为实例讲解了该方法的优点。     

认知无移盆认知无线电体系结构:无线电XML工程基础

认知无线电(Cognitive Radio)是软件无线电技术发展的下一步，是一种新的智能无线通信技术，它将智能计算能力综合到软件无线电中，从而服务于嵌入式智能代理，使其更好地适应射频环境和用户需求。利用这项技术，用户可以更充分有效地利用无线频谱和各项业务。例如，用户试图在载波负载量大的区域发送10MB的电子邮件时，认知无线电就会发出告警，并建议用户到办公室通过局域网发送。认知无线电技术是一项很有发展前景的技术，能够提高无线适应性，对无线通信技术的发展具有革命性的影响。全球无线通信巨头和科研实验室都已经致力于这一新…     

电力机车新型高频电源研究

机车高频开关电源取代传统的相控整流电源已经是一种必然。本文从电源的设计到具体的控制方法都着力显现高频开关电源的优越性。介绍了电源的全桥拓扑，3846电流型与斜坡补偿控制，主回路各滤波整流电路的设计，并且着重突出了对IPM的控制与保护。[编者按]