高温自动控制设备物理热传导的设计要求

给出了高温自动控制设备的热传导的数学物理方程组;求出了非齐次边值、非齐次初值的数理方程组之解;提出了对自动控制设备的I、R、K、I等诸参量的设计要求;提置了使用时对H参量的注意之点。     

非线性Schrōdinger方程和非线性Klein-Gordon方程耦合组Cauchy问题整体经典解的存在唯一性

本文讨论非线性Schrōdinger方程和非线性Klein-Gordon方程耦合组的Cauchy问题,对初值和空间维数以及非线性项加以适当限制,在Sobolev空间框架下,得到了整体经典解的存在唯一性。     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

Control system for the CSNS ion source test stand

A penning plasma surface H- ion source test stand for the CSNS has just been constructed at the IHEP. In order to achieve a safe and reliable system, nearly all devices of the ion source are designed to have the capability of both local and remote operation function. The control system consists of PLCs and EPICS real-time software tools separately serving device control and monitoring, PLC integration and OPI support. This paper summarizes the hardware and software implementation satisfying the requirements of the ion source control system.     

飞秒激光工艺参数对合金DD6气膜孔加工的影响

采用扫描电子显微镜(SEM)观察不同工艺参数下飞秒激光加工镍基单晶合金DD6气膜孔的形貌,主要考虑不同离焦量、不同单脉冲能量下气膜孔的孔径、锥度和圆度误差.实验结果表明:当离焦量由零转为正或负时,上孔径和锥度会增大,而下孔径则会减小;当离焦量由负变正时,圆度误差变大;当单脉冲能量逐渐增大,孔直径越大,锥度则会减小,圆度误差逐渐增大.当加工时间为30 min,离焦量为0,单脉冲能量为100 μJ时,孔锥度达到最佳值.     

周期场中强束流的特性研究

用薄透镜近似空间电荷相互作用的方法研究了强束流在周期场中的传输特性.通过计算可以说明束晕的形成.同时,也为研究比K–V分布更为复杂、真实的束流分布的传输特性提供了一种新的计算方法.     

高架污染绕建筑对流扩散风洞实验与数值仿真

采用激光衍射瞬时浓度场测量系统和图像处理系统,对不同高架与周围建筑高度比下污染点源绕建筑对流扩散进行了风洞实验.Fluent双相耦合模型与实验进行了相互校核,得到了建筑的各个高度层面污染分布、不同高度比下的污染扩散及污染分布随时间变化的规律.不同高度比对污染对流扩散具有明显的影响,建筑各高度层面污染浓度分布也存在明显差别.当高度比较小时,污染将堆积在建筑物底层.污染分布随时间变化有助于了解污染对流扩散的时间效应.结果可以为高架与周围建筑规划提供参考与依据.     

Introduction to the overall physics design of CSNS accelerators

The China Spallation Neutron Source (CSNS) is an accelerator-based facility. The     

Dy~(3+),Sm~(3+)共掺杂Ca_2A1[AlSiO_7]荧光粉的发光性质研究

采用高温固相反应法合成了一系列Dy~(3+)、Sm~(3+)单掺杂和共掺杂铝方柱石发光材料,详细地研究了Dy~(3+)、Sm~(3+)掺杂对铝方柱石的结构和发光性质的影响。XRD结果表明Dy~(3+)、Sm~(3+)离子单掺杂和共掺杂样品均形成了单相的铝方柱石结构化合物,并没有改变基质的晶体结构。发光光谱表明,通过调节Dy~(3+)、Sm~(3+)离子的掺杂比例,发光颜色可实现从黄色到黄白色的可控调节。此外,发射和激发光谱表明,Dy~(3+)与Sm~(3+)离子之间存在有效的光谱重叠,暗示着Dy~(3+)→Sm~(3+)的能量传递。荧光寿命衰减结果进一步证实Dy~(3+)与Sm~(3+)离子之间是一种无辐射共振能量传递方式。