2000 l/mm X射线镂空透射光栅的制备研究

在满足工艺要求的前提下,通过模拟光栅衍射,设计出镂空透射光栅模型,在此基础上将电子束和X射线光刻技术相结合,研究了制造2000 l/mm X射线镂空透射光栅的新工艺技术.首先利用电子束光刻和微电镀技术在镂空聚酰亚胺薄膜底衬上制备X射线母光栅掩模.然后利用X射线光刻和微电镀技术实现了光栅图形的复制,之后采用紫外光刻和微电镀技术制作加强筋结构,最后通过腐蚀体硅和等离子体刻蚀聚酰亚胺完成镂空透射光栅的制作.从此新的制造工艺结果上来看.制备的光栅栅线平滑,占空比合理,侧壁陡直,不同光栅之间一致性好,完全可以满足应用需求,充分表明了该制造技术是透射式X射线衍射光学元件制造的良好选择.     

强激光锥型靶真空电子加速数值模拟研究

真空激光加速机制具有加速场梯度大、加速电子电量高的优点,目前制约真空加速机制研究发展的主要问题是如何产生具有一定初速度的电子并将其注入加速场。提出了一种利用强激光与锥型靶相互作用产生高能电子并实现真空加速的新方法,利用二维PIC(Particle-in-cell)粒子模拟程序对这一方法进行了研究。模拟结果显示,对于光强为1021 W/cm2量级的高斯激光脉冲,产生了能量为GeV量级、发散角约为1°的强流快电子束。此外还通过理论解析和参数模拟研究了靶半径对这种超热电子加速机制的影响。     

Electron impact excitation of Ni-like gold studied by Dirac R-matrix method

We calculate the electron impact excitation of Ni-like gold by using the Dirac R-matrix theory, and the corresponding collision strengths and effective collision strengths are obtained. In the calculations of the level energy,(1s22s22p6)3s23p63d10, 3s23p63d94 l, 3s23p53d104 l, and 3s3p63d104l(l = 0,1,2,3) configurations are included and 107fine-structure levels are generated. In the calculations of the collision strengths, only the first 59 levels are included. Comparisons are made with the distorted wave(DW) results of Zeng et al. for both collision strengths and effective collision strengths. For the collision strengths, the two sets of calculations are in excellent agreement for most of the transitions.However, because of the inclusion of the resonances, our effective collision strengths are generally several times larger than those of Zeng et al.. The accuracy of our calculations is assessed.     

New terahertz dispersive device for single-shot spectral measurements of terahertz pulse

A new terahertz dispersive device designed for single-shot spectral measurements of broadband terahertz pulses is proposed. With two-dimensional quasi-randomly distributed element design, the device exhibits approximately the dispersive property of single-order diffraction in far field. Its far-field diffraction pattern is experimentally verified employing a continuous terahertz source centered at 2.52 THz and a pyroelectric focal-plane-array camera, which is in good agreement with the numerical result. The device provides a new approach for direct single-shot spectral measurements of broadband terahertz waves.     

95 MeV射频电子直线加速器辐射防护分析

应相关建设安评、环评、稳评以及职业健康评估的要求,电子加速器设计过程中即应对其辐射情况进行分析。针对电子能量为40～95 MeV可调的光阴极微波电子枪直线加速器,对其辐射源项进行分析,并讨论了可能的辐射防护措施的效果。采用蒙特卡罗软件FLUKA对电子束流和加速器进行建模,通过模拟计算发现,加速器产生的等效剂量分布主要位于废束桶中,废束桶以外辐射剂量迅速下降,在电子加速器实验大厅四周设置混凝土墙体的情况下辐射等效剂量率将随墙体厚度迅速下降。若混凝土墙体厚度设置为1 m,则墙体外工作人员所在区域辐射等效剂量率不高于1 μSv/h量级,能够有效屏蔽加速器产生的电离辐射,给工作人员提供有效防护。研究方法及结果对同能区同类型加速器建设中的辐射分析及辐射防护评估具有一定的参考价值。     

激光驱动气库靶对铝的准等熵压缩实验研究

利用激光驱动气库材料形成的等离子体射流对材料进行斜波加载, 可以获得高应变率的准等熵压缩. 在神光III 原型高功率激光装置上开展了激光驱动铝材料的准等熵压缩实验, 成像型速度干涉仪VISAR记录到样品自由面连续、光滑的速度历史, 采用反积分法得到60 GPa以上的峰值压强, 加载上升沿约10 ns,应变率可达10⁸ s ^-1, 并且观察到了压缩波在样品后表面的反射效应.     

鞘场加速机理中质子束的特性与其初始尺寸的关系

为了研究激光鞘场中质子层的尺寸对质子束特性的影响,本文应用中国工程物理研究院 激光聚变研究中心的二维Particle-In-Cell (2D-PIC)数值模拟程序Flips2D进行了相关数值模拟研究. 研究了质子束总能量随时间的变化,得出了加速持续过程与激光脉冲持续时间的关系; 研究了质子层的宽度对加速后质子束发散角和能谱的影响;研究了质子层的厚与加速后质子束 发散角和能谱的关系;得出了质子层的初始尺寸对加速后质子特性的影响规律.     

空泡机制产生betatron X射线辐射的数值模拟

针对SILEX钛宝石激光器参数,采用PIC数值模拟程序VORPAL对激光尾波场加速进行了模拟,得到了电子轨迹及能量数据,进而通过理论计算得到了空泡机制下X射线辐射特性。结果表明,空泡机制下高能电子在空泡中做betatron振荡且多数电子被加速到170 MeV左右;加速能量较低的电子（约100 MeV）, 其辐射谱为临界能量约3 keV的类同步辐射谱,发散角约为8 mrad,而能量较高的电子（约170 MeV）对应的光子临界能量约为10 keV。     

Characterization of relativistic electrons generated by a cone guiding laser pulse

We demonstrated the interaction of a gold cone target with a femto second(fs) laser pulse above the relativistic intensity of 1.37×10 18 μm 2 W/cm 2.Relativistic electrons with energy above 2 MeV were observed.A 25%-40% increase of the electron temperature is achieved compared to the case when a plane gold target is used.The electron temperature increase results from the guiding of the laser beam at the tip and the intense quasistatic magnetic field in the cone geometry.The behavior of the relativistic electrons is verified in our 2D-PIC simulations.     

Calibration and Monte Carlo simulation of a single-photon counting charge-coupled device for single-shot X-ray spectrum measurements

A Princeton Instruments PI-LCX 1300 charge-coupled device （CCD） camera used for X-ray spectrum measurements in laser-plasma experiments is calibrated using three radioactive sources and investigated with the Monte Carlo code Geant4. The exposure level is controlled to make the CCD work in single photon counting mode. A summation algorithm for obtaining accurate X-ray spectra is developed to reconstruct the X-ray spectra, and the results show that the developed algorithm effectively reduces the low-energy tail caused by split pixel events. The obtained CCD energy response shows good linearity. The detection efficiency curves from both Monte Carlo simulations and the manufacturer agree well with the experimental results. This consistency demonstrates that event losses in charge collection processes are negligible when the developed summation algorithm of sDlit Dixel events is emDloved.