Quantum multicast communication over the butterfly network

We propose a scheme where one can exploit auxiliary resources to achieve quantum multicast communication with network coding over the butterfly network.In this paper,we propose the quantum 2-pair multicast communication scheme,and extend it to k-pair multicast communication over the extended butterfly network.Firstly,an EPR pair is shared between each adjacent node on the butterfly network,and make use of local operation and classical communication to generate entangled relationship between non-adjacent nodes.Secondly,each sender adds auxiliary particles according to the multicast number k,in which the CNOT operations are applied to form the multi-particle entangled state.Finally,combined with network coding and free classical communication,quantum multicast communication based on quantum measurements is completed over the extended butterfly network.Not only the bottleneck problem is solved,but also quantum multicast communication can be completed in our scheme.At the same time,regardless of multicast number k,the maximum capacity of classical channel is 2 bits,and quantum channel is used only once.     

铜(Ⅱ)-硫氰酸盐-乙基紫-微乳液分光光度法测定钢样中的微量铜

在非离子型微乳液(OP/n-C5H11OH/n-C7H16/H2O)存在下,Cu2+与硫氰酸盐形成络阴离子[Cu(SCN)4]2-,在pH 3.6乙酸盐缓冲溶液中,该络阴离子再与乙基紫(EV)形成吸附型离子络合物,该络合物的组成为[Cu(SCN)4]2-:EV=1:2,最大吸收波长为660nm,表观摩尔吸光系数ε660为1.08×l05L.mol-1.cm-1,Cu2+含量在1.7～18.0μg/50 mL范围内符合比尔定律,检出限为0.5μg/50 mL,用该方法测定了钢中的铜,相对标准偏差小于2%。     

制备条件对Cu2S光阴极性能的影响

制备了Cu2S纳米材料,研究了制备条件对Cu2S形貌及催化多硫离子还原性能的影响,并将最优条件下制备的Cu2S作为光阴极应用在量子点敏化太阳能电池上.在Cu2S的制作过程中,盐酸对铜片的预处理及铜片和多硫化钠溶液的反应是影响Cu2S性能的两个重要过程.研究结果表明:得到的Cu2S为纳米片组成的花瓣状结构,且随着盐酸浓度的增大和处理时间的延长,表面逐渐变得粗糙和多孔,这有利于增加其表面积,因此Cu2S和多硫电解质之间的界面电荷转移电阻逐渐减小.另外,铜和多硫化钠溶液反应生成Cu2S是一个非常快的过程,反应时间不宜过长,否则Cu2S膜会断裂.在保证Cu2S具有良好催化性能的前提下优化得到的最经济省时的制备条件是:盐酸的浓度为30%,预处理时间为40min,和多硫化钠反应的时间为10s.用此条件下制备的Cu2S作为光阴极组装成量子点敏化太阳能电池达到了4.01%高的光电转化效率.     

TixV1-xO2薄膜的光学及相变特性

采用射频磁控溅射方法,在c-Al2O3(0001)基底上制备了不同钒钛比例的TixV1-xO2(0≤x≤1)薄膜,利用X射线衍射(XRD)、拉曼(Raman)光谱、紫外-可见-近红外(UV-Vis-NIR)光谱对薄膜结构及光学性能进行测试分析,计算薄膜的太阳能智能调节率和光学带隙.实验结果及分析表明:随着Ti含量的增加,薄膜的红外调节特性和热滞特性逐渐减弱直至消失;薄膜样品的光学带隙随着Ti含量的增加而变宽,光响应范围发生蓝移;其光学带隙随着V含量的增加而变窄,光响应范围发生红移.     

高功率超宽谱双反射面天线优化设计与实验

对高功率超宽谱双反射面天线系统进行了优化改进设计,兼顾辐射性能、馈入反射和功率容量。采用沿能流线设计的粗胖实体结构代替板状TEM喇叭极板结构,增加低频电流的回流通道,从而改善天线馈入反射特性。将副反射面设计为尼龙箱体内、外两部分,使其与尼龙箱体之间的连接螺钉不再突出于高压电场中,优化后最大场强下降了约70%,功率容量达到59 GW,通过Taguchi优化算法对组合馈源喇叭结构进行整体优化,天线辐射因子rE(辐射场峰值与观测点距离乘积)提高了1.2倍。优化后的天线系统进行了高功率实验,实验结果表明:天线系统功率容量达到30 GW,辐射因子超过8 MV。     

3mm TE_(6,2)模Denisov辐射器设计北大核心CSCD

提出了可应用于3mm波段回旋管的TE6,2模式Denisov辐射器。以耦合波理论为基础,给出Denisov辐射器的设计方法。结合3mm波段边廊模回旋管的具体参数,采用编制的数值计算程序,优化得到该模式Denisov辐射器,辐射器全长52mm。全电磁场仿真表明,该辐射器切割边缘电流幅值降为汇聚中心点的10%。由其组成的模式变换器,冷测结果好于Vlasov模式变换器。     

基于ARINC661的DF文件设计平台研究与实现

随着电子技术的发展,航空机载设备越来越多,也越来越复杂,座舱显示仪表日趋电子化和综合化。为此,ARINC公司制订的ARINC661规范,对座舱显示系统（CDS）和用户应用系统（UA）之间的通信接口进行了定义。通过对ARINC661规范的分析,研究了窗体部件的概念,重点对CDS与UA之间图形用户的接口定义文件（DF）展开了研究,研制开发了一套基于ARINC661规范的DF文件生成软件,为国内飞机座舱显示系统的开发提供了便利。     

First-principles study of structural stability and elastic property of pre-perovskite PbTiO3

The structural stability and the elastic properties of a novel structure of lead titanate, which is named pre-perovskite PbTiO₃ (PP-PTO) and is constructed with TiO₆ octahedral columns arranged in a one-dimensional manner, are investigated by using first-principles calculations. PP-PTO is energetically unstable compared with conventional perovskite phases, however it is mechanically stable. The equilibrium transition pressures for changing from pre-perovskite to cubic and tetragonal phases are -0.5 GPa and -1.4 GPa, respectively, with first-order characteristics. Further, the differences in elastic properties between pre-perovskite and conventional perovskite phases are discussed for the covalent bonding network, which shows a highly anisotropic character in PP-PTO. This study provides a crucial insight into the structural stabilities of PP-PTO and conventional perovskite.     

Beam dynamics studies on BEPC-Ⅱ storage rings at the commissioning stage

During the 1 st and 2 nd stages of the commissioning of the upgrade project of the Beijing Electron Positron Collider (BEPCⅡ), which started on Nov. 12, 2006 and Oct. 24, 2007, respectively, we got the luminosity one tenth of its design value, provided beams to synchrotron radiation users for about 4 months, and studied beam dynamics as well. In this paper, some beam dynamics studies on the storage rings and their preliminary results are given.     

基于虚拟仪器的机器人视觉处理

研究了一种基于虚拟仪器技术的机器人视觉处理方法.在推导了视觉伺服机器人系统的图像雅克比矩阵的基础上,运用NI公司（美国国家仪器公司）的IMAQ Vision,编写了视觉伺服机器人系统的视觉处理软件模块,通过优化算法有效提高了视觉处理系统的稳定性和抗干扰性,并给出了对比实验结果.