Cr（Ⅲ）—5—Br—PADAP—Triton X—100析相光度法测定微量铬的研究

研究Cr(Ⅲ)-5-Br-PADAP-Triton X-100析相显色体系,建立测定微量铬的析相光度法。在pH 4.5乙酸-乙酸钠介质中,Cr(Ⅲ)、5-Br-PADAP、Triton X-100加热形成的配合物,于95℃恒温浴中析相1h,即被Triton X-100相完全富集,最大吸收峰为593nm,铬含量在0～10μg/5ml服从比耳定律,以硫脲、锰-EDTA、柠檬酸钠、氟化钾为掩蔽剂,测定水样中微量铬,获得满意结果。     

卡尔曼滤波析相光度法同时测定锰铁铜锌镉的研究——5-Br-PADAP—Triton X-100体系

运用卡尔曼滤波递推法,以2-(5-溴-2-吡啶偶氮)—5-二乙氨基苯酚(5-Br-PADAP)为显色剂,建立了同时测定锰、铁、铜、锌、镉析相光度法.在pH9.0硼酸-氢氧化钠介质中,胶束溶液在95℃加热1h,配合物被Triton X-100相完全富集,最大吸收峰分别为锰566nm、铁556nm、铜560nm、锌562nm、镉557nm,工作曲线范围除镉为0～8μg/5ml外,其余均为0～10μg/5ml.应用于大米中锰铁铜锌镉的同时测定,结果满意.     

铀-2-(3,5-二溴-2-吡啶偶氮)-5-二乙氨基苯酚-Triton X-100析相体系的研究及应用

本文研究了铀-2-(3,5-二溴-2-吡啶偶氨)-5-二乙氨基苯酚(3,5-diBr-PADAP)-Triton X-100析相光度体系,建立了矿石中微量铀的测定方法,在pH 7.5三乙醇胺-盐酸介质中,将胶束溶液在 95±1℃加热 1h.络合物即被Triton X-100相完全富集.络合物最大吸收峰位于565nm.摩尔吸光系数为1.02×10～5L·mol～(-1)·cm～(-1),铀含量在0～12μg/5mL服从比耳定律.采用TBP萃淋树脂分离干扰离子,测定矿石中微量铀,结果满意.     

2—（4—氨酰基—2—噻唑基）—1,4—脱水—L—木糖醇及其氟代衍 …

用计算机分析模拟方法研究了２－（４－氨酰基－２－噻唑基）－１，４－脱水－Ｌ－木糖醇及其氟代衍生物的糖基构象，计算结果显示，６个碳核苷类似物的糖基构象均为Ｓ型。核磁共振谱和晶体Ｘ射线衍射结果与计算结果相吻合。     

植物形成愈伤组织的激素调节与核酸及氨基酸代谢的关系

本文将绿豆子叶切段培养在Miller培养基上附加或不附加生长素和激动素,研究了受伤和激素诱导形成愈伤组织的作用.实验证明绿豆子叶切段必须有生长素和激动素才能形成愈伤组织.25S和18S的RNA明显增加。对照子叶切段比形成愈伤组织的切段中自由氨基酸的含量多,而结合氨基酸的情况相反.脯氨酸和羟脯氨酸的含量在两种组织中都是随着培养时间的延长而增加,但是形成愈伤组织的切段中羟脯氨酸和脯氨酸含量的比例却大大超过对照。     

几种矿物酸为流动相对HEH(EHP)萃取柱色谱分离稀土的影响

本文研究了以 HEH(EHP)为固定相,盐酸、硝酸、高氯酸和硫酸为流动相,萃取柱色谱法分离稀土元素.其平均分配系数为:■_(H_2SO_4)(3.87)>■_(HCl)(3.47)>■_(HClO_4)(3.44)>■_(HNO_3)(2.68).其分配系数的顺序为:HClO_4>H_2SO_4>HNO_3>HCl.因此,盐酸是较好的流动相.在盐酸洗脱液中加入1M 氯化铵,使 La、Ce、Pr、Nd 分离的洗脱体积减少近3/4.     

纳米金刚石粉酸处理前后性能结构的表征

自从1963年爆炸法合成纳米金刚石[1]以来,纳米金刚石已在科研和工业领域得以广泛应用.但是工业合成的纳米金刚石粉由于其工艺的限制存在一些杂质,其中主要包括纳米石墨、非晶碳和爆炸过程中产生的金属离子.因此,在实际科研工作前对纳米金刚石粉进行纯化处理就显得十分重要,以往的研究表明不同的处理方法各有利弊[2].在以下的研究中,我们采用盐酸消解的方法对商业购买的纳米金刚石粉进行纯化处理,通过对比纯化处理前后的IR、Raman以及ICP表征,分析讨论了酸处理方法的纯化效果.     

Two-dimensional electron gas characteristics of InP-based high electron mobility transistor terahertz detector

The samples of In_xGa_(1-x)As/In_(0.52)Al_(0.48)As two-dimensional electron gas(2DEG)are grown by molecular beam epitaxy(MBE).In the sample preparation process,the In content and spacer layer thickness are changed and two kinds of methods,i.e.,contrast body doping andδ-doping are used.The samples are analyzed by the Hall measurements at 300 Kand 77 K.The In_xGa_(1-x)As/In_(0.52)Al_(0.48)As 2DEG channel structures with mobilities as high as 10289 cm~2/V·s(300 K)and42040 cm~2/V·s(77 K)are obtained,and the values of carrier concentration(Nc)are 3.465×10~(12)/cm~2and 2.502×10~(12)/cm~2,respectively.The THz response rates of In P-based high electron mobility transistor(HEMT)structures with different gate lengths at 300 K and 77 K temperatures are calculated based on the shallow water wave instability theory.The results provide a reference for the research and preparation of In P-based HEMT THz detectors.     

Experimental demonstration of underwater optical wireless power transfer using a laser diode

We experimentally demonstrate an underwater optical wireless power transfer(OWPT) using a laser diode(LD)as a power transmitter. We investigate the characteristics of a solar cell and a photodiode(PD) as a power receiver. We optimize the LD, the PD, and the solar cell to achieve the maximum transfer efficiency. The maximum transfer efficiency of the back-to-back OWPT is measured as 4.3% with the PD receiver. Subsequently, we demonstrate the OWPT in tap and sea water. Our result shows an attenuation of 3 dB/m in sea water.     

Geometrical optics-based ray field tracing method for complex source beam applications

Due to the fact that traditional ray field tracking approaches require a large number of geometrical optical(GO) ray tubes,they are very inefficient in many practical applications.An improved ray model scheme for a complex source beam(CSB) tracking technique is proposed in this paper.The source field can be expressed by a superposition of CSBs,then every CSB basis function has a Gaussian-type amplitude distribution and is suitable for replacing a GO ray tube in the ray tracing approach.The complex phase matching technique is adopted to find the reflected beam in the reflection point where local approximation is used to represent the curved surface in its neighborhood.A new solution to multiple reflections using the conventional right-handed reflected system is used to track the field easily.Numerical results show the accuracy of the proposed method.