排序方式: 共有80条查询结果,搜索用时 14 毫秒
41.
42.
随着广播电视事业的发展,传统的线性编辑设备正逐步被非线性编辑设备所代替,但各单位拥有的各种型号的编辑录像机,用于非线性设备的上、下载。这就带来了上、下载时要经常更换各种连线。为了使上、下载更方便,同时,也为了减少经常插拔连线造成接插件损坏,特设计了一台非线性上、下载4选1切换器。这台设备可同时切换视频(分量/复合)、音频和编辑控制3个信号,具有输入/输出双向通道,可以作为4路输入1路输出,用做上载切换,也可以作为1路输入4路输出,用做下载切换(4选1和1选4是指视、音频信号及编辑控制信号始终是1… 相似文献
43.
44.
A compact proton beam source for space simulation has been developed.A compact structure was designed in order to meet the special requirements of miniaturization.Some particular means have been adopted for improving the proton portion and beam transmission at a long distance.The experimental results showed that 8mA/30keV proton beam can be successfully obtained from this source at about 700W input microwave power. 相似文献
45.
本工作采用蒙特卡罗模拟,研究了以CH4/H2气体混合物作为源料气体的电子辅助热丝化学气相沉积中甲烷浓度对气相沉积过程的影响.计算了典型实验条件下电子能量分布,研究了电子平均能量、碎片H及CH3数目的空间分布、H与CH3的比值及CH3携带的能量随甲烷浓度的变化.结果表明:当电子能量为2-3eV时,电子的数密度达到一峰值;平均电子能量随着甲烷浓度的增加而增加;电子与气体分子碰撞产生的碎片H、CH3和CH2的数密度随距热丝的距离而变化;随着甲烷浓度的增加,原子氢H的数目缓慢下降,然而,官能团CH3和CH2的数目缓慢上升;H与CH3的数量比随甲烷浓度的增加而减少;碎片CH3携带的能量处于1~5eV范围之内,且当甲烷浓度为1.3;时,该能量达到一最值. 相似文献
46.
The objective stress rate is a rather important problem in mechanics of finite deformation. In this paper, the objective stress rate in co-moving coordinate is derived by applying nonlinear geometric field theory of deformation. Problems, such ax targe extension coupled with rotation, and large shear deformation, are exemplified by using the new formula. Comparing with Jaumann’s stress rate and other formulae presented in current literature, the new result appears to be the reasonable one in co-moving coordinate system. 相似文献
47.
采用蒙特卡罗方法,对以CH4/H2为源料气体的电子助进化学气相沉积(EACVD)金刚石中的氢原子(Hα,Hβ,Hγ)、碳原子C(2p3s→2p2:λ=165.7 nm)以及CH(A2Δ→X2Π:λ=420~440 nm)的发射过程进行了模拟,研究了不同CH4浓度下各发射谱线的空间分布。结果表明,不同CH4浓度下各发射谱线在反应空间的大部分区域内均随距灯丝距离的增大而增大,而当到达基片表面附近时有所减弱。随着CH4浓度的增加,H谱线强度减弱,CH与C谱线强度增强。 相似文献
48.
49.
采用蒙特卡罗方法,对以CH4/H2为源料气体的电子助进化学气相沉积(EACVD)金刚石中的氢原子(Hα, Hβ, Hγ)、碳原子C(2p3s2p2∶λ=165.7 nm)以及CH(A2Δ→X2Π∶λ=420~440 nm)的光发射过程进行了模拟,气体温度随空间的变化采用温度梯度变化,研究了不同反应室气压及衬底温度下的光发射谱特性。结果表明,不同衬底温度下各谱线强度均随气压的增大先增大后减小; 当气压较低时,谱线强度随衬底温度的增大而减少,而气压较高时,谱线强度随衬底温度的增大而增大。 相似文献
50.
Based on the variational equation derived in ref.[1]a nonlinear incremental F.E.equation is formulated for unilateral contact elastic and plastie large deformationproblems.A new technique-co-moving coordinate finite element method is introduced,and a practical mathematical model for large deformation contact problem is described.To show the effectiveness of the method,problems of contact large deformation ofcantilever beam.cireular plate,as well as metal ring are computed.Compared withexperiments.the results show good agreements. 相似文献