单纵模671nm红光激光器

利用全波片和Nd:YVO4激光器的偏振特性构成双折射滤光片,使用I类临界相位匹配LBO作为倍频晶体,在注入泵浦功率2.7W的情况下获得149mW的671nm单纵模红光输出,光-光转换率5.6%,该结构简单、紧凑,适合用于中低功率激光器。     

Study of the THGEM detector with a reflective CsI photocathode

The THGEM detector without and with a CsI has been tested successfully. The optimal parameters of THGEM have been determined from eight samples. The UV photoelectric effect of the CsI photocathode is observed. The changing tendency related to the extraction efficiency (ε_extr) versus the extraction electric field is measured, and several electric fields influencing the anode current are adjusted to adapt to the THGEM detector with a reflective CsI photocathode.     

A novel simulation method to evaluate the collection performance of a monolithic active pixel sensor

A novel simulation method is presented in this paper to evaluate the collection performance of monolithic active pixel sensor (MAPS) devices for minimum ionizing particle tracking. A simplified 3D matrix pixel structure is built using the computer aided design software Sentaurus. The virtual device is then divided into hundreds of parts and an independent customized X photon model is involved in each part to simulate the conditions under ⁵⁵Fe radiation. After data processing and analysis, charge collection efficiency, collection time and diffusion conditions can be estimated in detail. In order to verify the reliability of the method, comparisons are made between the simulations and experiments. Although there are some defects, it can be concluded that the proposed idea is a feasible method for the evaluation of the MAPS collection performance.     

基于时频分布的盲信号分离方法研究长骨中的多模式导波信号

由于超声导波对长骨皮质骨的材料特性及厚度变化非常敏感,因此用导波评价长骨状况的研究已成为近年来的一个研究热点.在接收到的导波中,往往多种模式混叠在一起,使得进一步求取每种导波模式的群速度等与骨质状况密切相关的参数时遇到困难.本文采用基于时频分布的盲信号分离(TFBSS)方法对长骨中混叠的多模式进行分离,然后对分离后的单...     

电磁驱动与电磁阻尼演示仪原理探究

将演示仪电磁驱动和电磁阻尼二者巧妙地结合起来,并利用单片机测量及数字化显示技术,更好地演示了电和磁这两种特殊物质抽象的物理本质和物理原理.     

THE PROBABILISTIC PROPERTIES OF THE NONLINEAR AUTOREGRESSIVE MODEL WITH CONDITIONAL HETEROSKEDASTICITY

1.IntroductionTakeseriesmodelswithconditionalheteroskedasticityarewidelyappliedinmanyareassuchasfinancialeconomicsandeconometrics.Consequently,thereisagrowingthetheoreticalinterestinthesemodels.Inthispaper,weareexclusivelyinterestedinthefollowingnonlinearautoregressivemodelwithconditionalheteroskedasticityat=rk(Xt~1,...Iac~p,01) eth(Xt~1,'IXo~~l02)(1.1)withthefollowingassumptions(i){Et}isasequenceofindependelltideticallydistributedrandomvariableswithacommonalmenteveryWherepositivedenistyi…     

珠心算训练题设计与注意事项

珠心算是一门学会珠算后，以听看训练为主的育人开智学科．因此学生珠心算能力的形成，是必须经过一定训练量的积累，才能产生相应的反应能力，进而达到开发儿童智力的目的．因此，训练题的设计是否合理、科学，就成为直接影响珠心算教学效果的因素之一。     

Analysis to Some Solutions Obtained by Modified Extended tanh-Function Method＊

First, two tanh-coth type solutions of a class of nonlinear wave equation are derived by using a simplified modified extended tanh-function method. Then, further analysis to some tanh-coth type solutions of nonlinear evolution equations are given. The results show that when balance number m is one or two, the tanh-eoth type solutions obtained by the modified extended tanh-funetion method can be obtained by using the hyperbolic-function method.     

微热板式低气压传感器的研制

研制了一种采用CMOS工艺和表面牺牲层技术加工的微热板式低气压传感器.该微热板为四臂支撑悬空矩形板,其边长为75μm,支撑桥长为60μm,板下气隙高度为0.5μm.采用经典傅里叶传热理论分析了恒电流工作方式下气压对微热板瞬态和稳态热特性的影响,结果表明在低气压范围内微热板传热以支撑桥导热为主,气压较高时以气体导热为主,微热板加热功率随气压增加而减小;传感器的热响应时间为毫秒量级并随气压增加而减小.传感器采用恒电流工作方式时,测得其气压响应范围为1～105Pa,且加热功率与气压间关系的理论分析结果与实测值吻合得较好.     

预防5ESS口令意外失效的办法

文章介绍一种易于实现的预防５ＥＳＳ口令失效的方法。