Ultraviolet Luminescence in Mg0.12Zn0.88O Alloy Films

We investigate the origin of ultraviolet （UV） emission from Mg0.12 Zn0.88 O alloy thin films with a wurtzite structure fabricated on c-plane Al2O3 substrates by plasma assisted molecular beam epitaxy. At room temperature, the absorption edge and UV emission band of the Mg0.12Zn0.88O film shift to high-energy side compared with ZnO films. Temperature dependence of the photoluminescence spectra shows that the UV emission is composed of free exciton and neutral donor bound exciton emissions. Two-step dissociation processes of the UV emission are observed with the increasing temperature. The thermal quenching mechanism is attributed to the dissociation of the free exciton from the neutral donor bound exciton in the low temperature region and the dissociation of free electron and hole from the free exciton in the high temperature region.     

医用光学定位系统辐射发射整改措施分析

针对某光学定位系统辐射发射的超标问题,分析其干扰原因,进行干扰源的定位和超标原因分析,并从电路布局、结构设计、骚扰源滤波设计、减小接地阻抗等方面对样品进行了整改分析及整改实施。整改后,辐射发射测试结果符合GB 4824-2019中1组A类测试要求,对其他类似医疗产品进行电磁兼容设计、整改具有一定参考价值。     

直流场致发光电视的灰度控制

1.前言 为了实现墙壁电视,很多单位正在研制用矩阵屏显示电视图象的装置,同时正在研究主要问题之一——灰度级的显示方法。 虽然矩阵屏的亮度控制有模拟信号法和数字信号法,但从装置的毫无调整、工作稳定和集成化(小形、低功耗)等方面看,数字方法是适当的。作者们以前试验了用加权的数个亮度控制脉冲来控制电视图象显示器的亮度~1)、~2),这方面,别人也发表了几个实例~3)、~4)~5)。但是因为作成实际的显示装置时要求电路结构简单,所以灰度级不能过多,因此必须探讨不只是灰度级多,而     

介质靶成象过程分辨率的研究

本文研究了在某些摄象器件、存贮器件或电光显示器件中介质靶诸因素对分辨率的影响。在考虑各向异性介质靶的普遍情况下,推导了由表面电荷光栅图象到电位图象或光象的介质靶的光学传递函数。定量地分析了它的分辨率极限;较详细地讨论了表面漏电和靶而其他介质膜层的引入对分辨率的影响。作为例子,利用TQ-16型计算机计算了摄象管中的硅靶、录象磁带中的聚苯乙烯靶和大屏幕投影电视中的DKDP晶体各向异性介质靶的MTF曲线,从而求得了它们的分辨率,所得结果与国外资料报道的实验曲线和数据很好地吻合。最后,用DKDP晶体所做的实验进一步证实了计算的结果。 关键词：     

非线性Schroedinger方程组的精确解组

运用Maple语言程序，在没有假设的条件下，得到了具有耦合特性的非线性Schrfidinger方程组的行波精确解组及其约束条件方程，它们的表达式涵盖了所有的耦合解组与非耦合解组，具有任意性。耦合解组的算例函数及其特性分析，解释了α螺旋蛋白质螺旋链运动模型的行波孤立子解的耦合效应，揭示了增加、稳定和控制蛋白质活性和功能的方向。文章的研究方法，为求解耦合的非线性微分方程组的行波精确解组探索了蹊径。     

基于环境可视化的视景仿真

简要介绍了视景仿真技术,对视景仿真系统组成与实现方法进行了分析,结合可视化软件与模型工具完成了三维视景的生成及其与实体模型的集成,对可视化进行了初步研究。     

High－Power Blue Light Generation by External Frequency Doubling of an Optical Parametric Oscillator ＊

We report on an all-solid-state high-power quasi-continuous blue light source by the frequency doubling of asignal wave from an optical parametric oscillator (OPO). A 50-mm-long LiB305 (LBO) crystal is used for theOPO, which is pumped by a diode-pumped Nd:YAG green laser (1OkHz, 50ns). Tunable blue emission in a newnonlinear crystal BiB306 (BiBO) is obtained with a wavelength range from 450 to 495 nm. The average power ofthe signal output is as high as 9.3 W from 924 to 970nm. The maximum output of the blue laser with the secondharmonic walk-off compensation is 1.3W average power at 470nm for 6.2W of OPO signal light at 940nm.     

ASYMPTOTIC DYNAMIC SOLUTION TO THE MODE PROPAGATING CRACK-TIP FIELD IN ELASTIC- VISCOPLASTIC MATERIAL

A new elastic-viscoplastic mode was proposed to analyze the stress and strain fields surrounding the tip of a propagating mode Ⅰ cracks. A proper displacement pattern was suggested and asymptotic equations were derived, and numerical solutions were illustrated. The analysis and calculation show that the crack-tip field is of logarithmic singularity for smaller viscosity, however no solution exists for large viscosity. By a careful analysis and comparison, it is found that the present results retain all merits of those given by Gao Yu-chen, while removing existing problems.     

不可压粘性流体浸入边界直接力法及软件实现

浸入边界法通过在N-S方程中施加体积力模拟不可滑移固壁边界及动边界,避免生成复杂贴体网格及动网格,极大地节省了网格建模时间及动网格计算消耗。本文提出一种新型附加体积力简化计算方法,将简化附加体积力以源项形式嵌入动量方程迭代中,通过用户自定义函数对CFD软件FLUENT二次开发,实现了浸入边界法和通用流体力学求解器的耦合计算。通过静止圆柱和动圆柱绕流数值模拟进行了验证,并探讨了插值函数对计算精度的影响。研究表明,通过引入浸入边界模型,能够提高计算效率,并实现结构网格背景下复杂边界和动边界的高效建模。     

Triangular elements for Reissner-Mindlin plate

I-IntroductionInrecentyearsmuchresearchefforthasbeenspentonthedevel0pmentofreliableandefficientplateelementsbasedonReissner-Mindlintheory.Adifficultyisthelockingbehaviorexhibitedasl- 0(tisthethicknessoftheplate)forlowerorderc'elements.BasedonTaylorexpendi…