White organic light-emitting device with\ both phosphorescent and fluorescent emissive layers

This paper reports the fabrication of novel white organic light-emitting device（WOLED） by using a high efficiency blue fluorescent dye N-（4-（（E）-2-（6-（（E）-4-（diphenylamino）styryl）naphthalen-2-yl）vinyl）phenyl）oN- phenylbenzenamine （N-BDAVBi） and a red phosphoresecent dye bis （1-（phenyl） isoquinoline） iridium （III） acetylanetonate （Ir（piq）2（acac））. The configuration of the device was ITO/PVK：TPD/CBP： N-BDAVBi /CBP/ BALq： Ir（piq）2（acac）/BCP/Alq3/LiF：AL. By adjusting the proportion of the dopants （N-BDAVBi, Ir（piq）2（acac）） in the light-emitting layer, white light with Commission Internationale de l＇Eclairage （CIE） coordinates of （0.35, 0.35） and a maximum luminance of 25350cd/m2 were obtained external quantum and current efficiency of 6.78% and between the two light-emitting layers and using BCP at an applied voltage of 22V. The WOLED exhibits maximum 12cd/A respectively. By placing an undoped spacer CBP layer as hole blocking layer, the colour stabilization slightly changed when the driving voltage increased from 6 to 22 V.     

Efficiency of a blue organic light-emitting diode enhanced by inserting charge control layers into the emission region

We demonstrate high current efficiency of a blue fluorescent organic light-emitting diode (OLED) by using the charge control layers (CCLs) based on Alq3 . The CCLs that are inserted into the emitting layers (EMLs) could impede the hole injection and facilitate the electron transport, which can improve the carrier balance and further expand the exciton generation region. The maximal current efficiency of the optimal device is 5.89 cd/A at 1.81 mA/cm2 , which is about 2.19 times higher than that of the control device (CD) without the CCL, and the maximal luminance is 19.660 cd/m2 at 12V. The device shows a good color stability though the green light emitting material Alq3 is introduced as the CCL in the EML, but it has a poor lifetime due to the formation of cationic Alq3 species.     

插入电荷控制层对蓝色OLED发光性能的提高

用蓝色有机荧光材料N⁶,N⁶,N¹²,N¹²-tetrap-tolylchrysene-6,12-diamine （DNCA）作为发光层,在发光层中间以及发光层与电子传输层之间插入2-methyl-9,10-di（2-napthyl）anthracene （MADN） 和9,10-di（2-naphthyl）anthracene （ADN） 作为电荷控制层,制备了结构为ITO/NPB（40 nm）/DNCA（15 nm）/MADN（3 nm）/DNCA（15 nm）/ADN（3 nm）/Bphen（30 nm）/LiF（0.8 nm）/Al（120 nm）的蓝色有机电致发光器件（OLED）。该器件的最大电流效率和最大亮度分别为5.6 cd/A和23 310 cd/m²。与传统的单发光层器件相比,最大电流效率和最大亮度分别提高了70%和87%。器件发光性能的提高可归结于两个电荷控制层在整个器件中的协同作用。第一电荷控制层MADN的作用主要是将发光层区域分成两个部分,从而扩大了激子在发光层中的复合区域;第二电荷控制层ADN可以有效地将空穴限制在发光层中,避免了激子在电子传输层中形成的无辐射跃迁从而提高了器件的发光性能。     

柔性有机电致发光器件的寿命

综述了柔性有机电致发光器件(FOLED)的研究现状和发展趋势;针对提高其寿命问题的研究,选择和比较了聚合物、金属箔片、超薄玻璃3种柔性衬底材料的优缺点及发展概况;结合本课题组的实验分析,说明设计并选择合理的器件结构、发光材料和阴极材料对延长器件的使用寿命非常有效;提高FOLED寿命的另一重要步骤是减少水蒸汽和氧气向器件内部的渗透,最后也简介了以聚合物和超薄玻璃为衬底材料的器件封装方法。     

Research of organic field effect transistors based on semiconducting single-walled carbon nanotubes

The metal-conducting single-walled carbon nanotubes(m-SWNTs)with small diameters(0.7 nm-1.1 nm)are selectively removed from the single-walled carbon nanotubes(SWNTs)by using HNO 3 /H 2 SO 4 mixed solution.Semiconducting single-walled carbon nanotubes(s-SWNTs)can be separated efficiently from the SWNTs with high controllability and purity based on this novel method,and the outcome is characterized by Raman spectrum.Moreover,the organic field effect transistors(OFETs)are fabricated based on the poly(3-hexylthiophene-2,5-diyl)(P3HT),and untreated SWNTs and separated SWNTs(s-SWNTs)are mixed with P3HT,respectively.It could be found that the P3HT/s-SWNT device exhibits a better field effect characteristic compared with the P3HT device.The current on/off ratio is increased by 4 times,the threshold voltage is also increased from-28 V to-22 V,and the mobility is increased from 3×10-3 cm2/Vs to 5×10-3 cm2/Vs.     

SYNTHESIS OF POLY(2,5-DIPHENYL-1,3,4-THIADIAZOLYL)-4,4'-VINYLENE AND ITS ELECTROLUMINESCENT PERFORMANCE*

The synthesis, characterization and electroluminescence performance of a new type of conjugatedpolymer, poly(2,5-diphenyl-1,3,4-thiadiazolyl)-4,4'-vinylene (TPPV) are presented. A light-emitting diodeconsisted of ITO/TPPV/Al is driven at about 4.0 V and has a peak emission wavelength of 485 nm. Thisblue-shift of the peak is due to the decrease of conjugate degree of TPPV compared to PPV. This result is inaccord with that determined by XPS and theoretical model of MNDO/3     

Performance of pentacene-based organic field effect transistors using different polymer gate dielectrics

Pentacene-based organic field effect transistors（OFETs） are fabricated using poly（methyl methacrylate）（PMMA） and polyimide（PI） as gate dielectrics,respectively.The fabricated OFETs exhibit reasonable device characteristics.The field-effect mobility,threshold voltage,and on/off current radio are determined to be 3.214 ×10^-2 cm^2 /Vs,-28 V,and 1 ×10^3 respectively for OFETs with PMMA as gate dielectrics,and 7.306×10^-3cm^2 /Vs,-21 V,and 2 ×10^2 for OFETs with PI.Furthermore,the dielectric properties of gate insulator layer are tested and the dipole effect at the semiconductor/dielectrics interface is also analyzed by a model of energy level diagram.     

聚合物O-PPV的链间相互作用的研究

近年来,聚对苯乙炔(PPV)及其衍生物作为一类性能优良的电致发光材料而受到人们的广泛关注[1].这是因为聚合物发光材料能通过化学裁剪方法来改善发光效率、颜色、成膜性等特性.载流子形成激子以及激子的辐射和非辐射衰减过程向来是聚合物发光二极管(LEDs)发光的重要环节,因此研究聚合物的光物理过程对提高器件的发光特性是非常重要的.     

有机激基复合物电致发光器件

报导了有机电致发光（ＯＥＬ）器件中激基复合物（ｅｘｃｉｐｌｅｘ）的发光现象．利用简单的结构，获得了ｅｘｃｉｐｌｅｘ型的白色电致发光．结果表明ｅｘｃｉｐｌｅｘ的形成为ＯＥＬ器件获得多色发射提供了一种新途径．     

Vortex chains induced by anisotropic spin-orbit coupling and magnetic field in spin-2 Bose-Einstein condensates

We investigate the anisotropic spin-orbit coupled spin-2 Bose-Einstein condensates with Ioffe-Pritchard magnetic field. With nonzero magnetic field, anisotropic spin-orbit coupling will introduce several vortices and further generate a vortex chain. Inside the vortex chain, the vortices connect to each other, forming a line along the axis. The physical nature of the vortex chain can be explained by the particle current and the momentum distribution. The vortex number inside the vortex chain can be influenced via varying the magnetic field. Through adjusting the anisotropy of the spin-orbit coupling, the direction of the vortex chain is changed, and the vortex lattice can be triggered. Moreover, accompanied by the variation of the atomic interactions, the density and the momentum distribution of the vortex chain are affected. The realization and the detection of the vortex chain are compatible with current experimental techniques.