The Polyakov path integral over bordered surfaces

Following the general scheme of the convariant path integral quantization of gauge systems, two alternative formulations of the first quantized closed bosonic string in a position representation are presented. In both approaches the covariant path integral representations of the propagator and of the higher order off-shell amplitudes are constructed. For a wide class of gauges the explicit formulae for off-shell amplitudes are obtained. This paper is the continuation of our previous work where the corresponding problems in the open string case were considered [20].     

Preparation of activated carbons from cherry stones by activation with potassium hydroxide

Using cherry stones, the preparation of activated carbon has been undertaken in the present study by chemical activation with potassium hydroxide. A series of KOH-activated products was prepared by varying the carbonisation temperature in the 400-900 °C range. Such products were characterised texturally by gas adsorption (N₂, −196 °C), mercury porosimetry, and helium and mercury density measurements. FT-IR spectroscopy was also applied. The carbons prepared as a rule are microporous and macroporous solids. The degree of development of surface area and porosity increases with increasing carbonisation temperature. For the carbon heated at 900 °C the specific surface area (BET) is 1624 m² g⁻¹, the micropore volume is 0.67 cm³ g⁻¹, the mesopore volume is 0.28 cm³ g⁻¹, and the macropore volume is 1.84 cm³ g⁻¹.     

On bulk-service MAP/PH L,N /1/N G-Queues with repeated attempts

We consider a retrial queue with a finite buffer of size N, with arrivals of ordinary units and of negative units (which cancel one ordinary unit), both assumed to be Markovian arrival processes. The service requirements are of phase type. In addition, a PH^L,N bulk service discipline is assumed. This means that the units are served in groups of size at least L, where 1≤ L≤ N. If at the completion of a service fewer than L units are present at the buffer, the server switches off and waits until the buffer length reaches the threshold L. Then it switches on and initiates service for such a group of units. On the contrary, if at the completion of a service L or more units are present at the buffer, all units enter service as a group. Units arriving when the buffer is full are not lost, but they join a group of unsatisfied units called “orbit”. Our interest is in the continuous-time Markov chain describing the state of the queue at arbitrary times, which constitutes a level dependent quasi-birth-and-death process. We start by analyzing a simplified version of our queueing model, which is amenable to numerical calculation and is based on spatially homogeneous quasi-birth-and-death processes. This leads to modified matrix-geometric formulas that reveal the basic qualitative properties of our algorithmic approach for computing performance measures. AMS Subject Classification: Primary 60K25 Secondary 68M20 90B22.     

Velocity Quantization Approach of the One-Dimensional Dissipative Harmonic Oscillator

Given a constant of motion for the one-dimensional harmonic oscillator with linear dissipation in the velocity, the problem to get the Hamiltonian for this system is pointed out, and the quantization up to second order in the perturbation approach is used to determine the modification on the eigenvalues when dissipation is taken into consideration. This quantization is realized using the constant of motion instead of the Hamiltonian. PACS: 03.20.+i, 03.30.+p, 03.65.−w,03.65.Ca     

Microperforated insertion units: An alternative strategy to design microperforated panels

Microperforated panels (MPPs) coupled to a rigid wall have been proposed recently as an alternative to porous absorbers in situations having concerns with bacterial contamination and small particles discharge, like food, pharmaceutical and microelectronic industries. There exists also an increasing interest for MPP absorbers in the transportation industry and civil engineering. In general, an optimally designed MPP with good broadband absorption requires many submillimetric holes distributed over a panel of also submillimetric thickness. Such thin plates or foils become so fragile that they need to be protected from mechanical damage. In this paper, an alternative strategy is investigated which allows the design of MPPs with panels of millimetric thickness while maintaining their acoustic performance. These absorbers, named microperforated insertion units (MIUs), avoid the structural problems of the classical MPPs. An assessment of the sound absorption properties of these structures is presented. Comparisons between calculations and measurements are also made under two experimental conditions: plane waves at normal incidence (impedance tube) and free field (anechoic room).     

Asymptotic Behavior of Sobolev-Type Orthogonal Polynomials on a Rectifiable Jordan Curve or Arc

Our object of study is the asymptotic behavior of the sequence of polynomials orthogonal with respect to the discrete Sobolev inner product <formula> \langle f, g \rangle = ∈t_{E} f(ξ) \overline{g(ξ)} ρ(ξ) |d ξ|+ f(Z) A g(Z)^H, </formula> where E is a rectifiable Jordan curve or arc in the complex plane f(Z) = (f(z_1), \ldots, f^{(l_1)}(z_1) , \ldots , f(z_m) , \ldots ,f^{(l_m)}(z_m)), A is an M \times M Hermitian matrix, M l ₁ + ⋅s + l _m + m , |d ξ| denotes the arc length measure, ρ is a nonnegative function on E , and z _i ∈Ω, i=1,2,\ldots,m , where Ω is the exterior region to E . July 23, 1999. Dates revised: September 11, 2000 and February 16, 2001. Date accepted: February 26, 2001.     

The phase composition of tin-nickel electrodeposited alloys

It was studied the tin phase composition of the electrodeposited alloys produced at different temperatures and current densities from an acid chloride/fluoride electrolyte and an acid chloride bath. Mössbauer spectra were consistent with a Ni₃Sn₄ intermetallic compound, dissolved tin, and a Cu?Sn intermetallic compound formed at the interface of the copper substrate.     

Oscillatory kinetics and mechanism of the chromate catalyzed decomposition of hydrogen peroxide

Oscillatory change of pH occurs during the chromate-catalyzed decomposition of hydrogen peroxide in a weakly acidic medium at elevated temperature and at high initial concentration of hydrogen peroxide. In a closed system, there are only two or three periods, but sustained oscillation occurs in a CSTR. In a CSTR bistability is also found. In closed systems the temperature exhibits a great maximum (up to 15°C increase), in a CSTR sustained oscillation occurs at a constant stationary temperature.     

A high-current electron beam ion trap as an on-line charge breeder for the high precision mass measurement TITAN experiment

The precision of atomic mass measurements in a Penning trap is directly proportional to the charge state q of the ion and, hence, can be increased by using highly charged ions (HCI). For this reason, charge breeding with an electron beam ion trap (EBIT) is employed at TRIUMF’s Ion Trap for Atomic and Nuclear science (TITAN) on-line facility in Vancouver, Canada. By bombarding the injected and trapped singly charged ions with an intense beam of electrons, the charge state of the ions is rapidly increased inside the EBIT. To be compatible with the on-line requirements of short-lived isotopes, very high electron beam current densities are needed. The TITAN EBIT includes a 6 Tesla superconducting magnet and is designed to have electron beam currents and energies of up to 5 A and 60 keV, respectively. Once operational at full capacity, most species can be bred into a He-like configuration within tens of ms. Subsequently, the HCI are extracted, pass a Wien filter to reduce isobaric contamination, are cooled, and injected into a precision Penning trap for mass measurement. We will present the first results and current status of the TITAN EBIT, which has recently been moved to TRIUMF after assembly and commissioning at the Max-Planck-Institute (MPI) for Nuclear Physics in Heidelberg, Germany.