Solubility of methane in pure non-ionic surfactants and pure and mixtures of linear alcohols at 298 K and 101.3 kPa

The emissions of methane (CH₄), a powerful greenhouse gas (GES), contribute to the increase in GES concentration level in the atmosphere. For this reason, the importance of controlling CH₄ emissions of anthropogenic origin has increased over the last decades. Physicochemical and biological processes are available for treating CH₄. For this reason, such properties as the solubility of CH₄ in aqueous solutions and organic solvents are of great relevance in different applications in environmental engineering and biotechnology. In this study, the solubility of CH₄ was determined at 298 K and 101.3 kPa in organic solvents, such as polyoxyethylenesorbates (Tween 20, Tween 40, and Tween 60), and linear alcohols (methanol, ethanol, and butan-1-ol) alone and in their admixtures. Admixtures of methanol with butan-1-ol exhibited the highest solubility of CH₄, of around 0.49 g m⁻³ of solvent, whereas the solubility of CH₄ in linear alcohols varied from 0.167 g m⁻³ to 0.41 g m⁻³ of solvent. In the case of Tweens, CH₄ solubility decreased with the hydrophilic-lipophilic balance (HLB) number.     

Acetylacetone, an interesting anchoring group for ZnO-based organic-inorganic hybrid materials: a combined experimental and theoretical study

Acetylacetone (acacH) adsorption on ZnO (10-10) surface has been studied by a theoretical periodic approach using density functional theory. Two dissociative adsorption modes were investigated and compared to the most stable adsorption mode of formic acid. Acetylacetone appears as a suitable anchoring group for hybrid materials, with adsorption energies of the same order of magnitude as formic acid. IR spectra of the acac/ZnO systems were computed in order to determine the spectral signature of adsorption and, possibly, of each adsorption mode to follow the coordination of acac on ZnO at the experimental level. The results have been compared to Fourier transform infrared (attenuated total reflection-IR) experimental spectra. The present investigation points out the interest of acetylacetone as an anchoring group for the development of new ZnO-based functionalized hybrid layers for corrosion protection, light emitting diodes, photocatalytic systems, and dye-sensitized solar cells.     

Influence of synthesis conditions on the cross-link architecture of silsesquioxanes prepared by in situ water production route

The esterification reaction between carboxylic acids and alcohols has been used as the source of water for the hydrolysis-condensation reactions of difunctional and trifunctional organosilanes. Diphenylsilanediol (DPDO) has been reacted with methacryloxypropyltrimethoxysilane (MPTMS) and glycidoxypropyltrimethoxysilane (GPTMS) and the obtained products have been characterized by vibrational spectroscopy (FT-IR, FT-Raman) nuclear magnetic resonance (NMR) and gel permeation chromatography. The relation between water availability from the in situ water production process (ISWP) and silsesquioxanes morphology has been evaluated in the case of DPDO/MPTMS mixtures, changing molecular features of acids and alcohols. These measurements have shown that the pK of the carboxylic acid used in the esterification reaction has a valuable influence on the silanes cross-linking ability. Acids with low pK values and heteroatoms substituents favor the silane hydrolysis and allow the growth of high molecular weight species. Using acetic acid/ethanol mixture leads to the best results for DPDO/MPTMS reaction, with a narrow distribution of silsesquioxane species. Under the same conditions, the reaction of DPDO with GPTMS produces polymeric species and only avoiding the presence of the difunctional precursor allows to limiting the silsesquioxanes species growth.     

New POCOP-type pincer complexes of Nickel(II)

The pincer complex [(POCOP)Ni(NCMe)][OSO₂CF₃] (1: POCOP = {2,6-(i-Pr₂PO)₂C₆H₃}) undergoes an acetonitrile substitution reaction in the presence of CN(t-Bu), KCN, and KOCN to give the new complexes [(POCOP)Ni{CN(t-Bu)}][O₃SCF₃] and (POCOP)Ni(X) (X = CN and NCO). The Ni-CN derivative is also obtained from a gradual decomposition of the Ni-CN(t-Bu) derivative, while the aquo derivative [(POCOP)Ni(OH₂)][O₃SCF₃] was obtained from slow hydrolysis of (POCOP)Ni(OSO₂CF₃). All new complexes have been characterized spectroscopically and by X-ray crystallography. IR and solid state structural data indicate that Ni-L/X interactions are dominated by ligand-to-metal σ-donation; presence of little or no π-backbonding is consistent with the electrophilicity of the cationic fragment [(POCOP)Ni]⁺.     

Neptunium(III) application in extraction chromatography

This paper describes a novel strategy for actinide separation by extraction chromatography with Np(III) valence adjustment. Neptunium(IV) was reduced to Np(III) using Cr(II) and then selectively separated from uranium (IV) on a TEVA resin. After elution, Np(III) was retained on a DGA resin in order to remove any detrimental chromium impurities. Neptunium(III) formation was demonstrated by the complete and selective elution of Np from TEVA resin (99 ± 7%) in less than 12 mL of 9 M HCl from U(IV) (0.7 ± 0.7%). It was determined by UV–visible and kinetic studies that Cr(II) was the only species responsible for the elution of Np(IV) as Np(III) and that the Cr(II) solution could be prepared from 2 to 30 min before its use without the need of complex degassing systems to prevent the oxidation of Np(III) by oxygen. The methodology proposed here with TEVA/DGA resins provides removal of Cr(III) impurities produced at high decontamination factors (2.8 × 10³ and 7.3 × 10⁴ respectively).     

A new method to analyze copolymer based superplasticizer traces in cement leachates

Enhancing the flowing properties of fresh concrete is a crucial step for cement based materials users. This is done by adding polymeric admixtures. Such additives have enabled to improve final mechanicals properties and the development of new materials like high performance or self compacting concrete. Like this, the superplasticizers are used in almost cement based materials, in particular for concrete structures that can have a potential interaction with drinking water. It is then essential to have suitable detection techniques to assess whether these organic compounds are dissolved in water after a leaching process or not. The main constituent of the last generation superplasticizer is a PolyCarboxylate-Ester copolymer (PCE), in addition this organic admixture contains polyethylene oxide (free PEO) which constitutes a synthesis residue. Numerous analytical methods are available to characterize superplasticizer content. Although these techniques work well, they do not bring suitable detection threshold to analyze superplasticizer traces in solution with high mineral content such as leachates of hardened cement based materials formulated with superplasticizers. Moreover those techniques do not enable to distinguish free PEO from PCE in the superplasticizer.Here we discuss two highly sensitive analytical methods based on mass spectrometry suitable to perform a rapid detection of superplasticizer compounds traces in CEM I cement paste leachates: MALDI-TOF mass spectrometry, is used to determine the free PEO content in the leachate. However, industrial copolymers (such as PCE) are characterized by high molecular weight and polymolecular index. These two parameters lead to limitation concerning analysis of copolymers by MALDI-TOFMS. In this study, we demonstrate how pyrolysis and a Thermally assisted Hydrolysis/Methylation coupled with a triple-quadrupole mass spectrometer, provides good results for the detection of PCE copolymer traces in CEM I cement paste leachates.     

New monoterpene-derived phosphinopyridine ligands and their application in the enantioselective iridium-catalyzed hydrogenation

Pyridine derivatives with a phosphine or phosphinite pendant (1-11) have been synthesized from (+)-α-pinene, (−)-isopinocampheol, and/or (+)-camphor via Kröhnke annulation or another annulation method as the key step for the construction of the pyridine nucleus. The iridium complex of 6 proved to catalyze hydrogenation of the prochiral unfunctionalized alkene 44 with 94% ee, whereas the complex of 2 was most efficient in the hydrogenation of the cinnamyl-type ester 45 (83% ee).     

Selectivity among two lectins: probing the effect of topology, multivalency and flexibility of "clicked" multivalent glycoclusters

The design of multivalent glycoconjugates has been developed over the past decades to obtain high-affinity ligands for lectin receptors. While multivalency frequently increases the affinity of a ligand for its lectin through the so-called "glycoside cluster effect", the binding profiles towards different lectins have been much less investigated. We have designed a series of multivalent galactosylated glycoconjugates and studied their binding properties towards two lectins, from plant and bacterial origins, to determine their potential selectivity. The synthesis was achieved through copper(I)-catalysed azide-alkyne cycloaddition (CuAAC) under microwave activation between propargylated multivalent scaffolds and an azido-functionalised carbohydrate derivative. The interactions of two galactose-binding lectins from Pseudomonas aeruginosa (PA-IL) and Erythrina cristagalli (ECA) with the synthesized glycoclusters were studied by hemagglutination inhibition assays (HIA), surface plasmon resonance (SPR) and isothermal titration microcalorimetry (ITC). The results obtained illustrate the influence of the scaffold's geometry on the affinity towards the lectin and also on the relative potency in comparison with a monovalent galactoside reference probe.     

Ferromagnetic versus antiferromagnetic exchange interactions in tetrathiafulvalene-based 3d/4f heterobimetallic complexes

(TTF-salphen)M compounds (TTF-salphen(2-)=4,5-bis(propylthio)tetrathiafulvalene-N,N'-phenylenebis(salicylideneimine) dianion; M=Cu(II) and Ni(II)) have been treated with Ln(hfac)(3)·2H(2)O precursors (hfac(-)=1,1,1,5,5,5-hexafluoroacetylacetonate anion; Ln=Gd(III), Tb(III), and Dy(III)) to elaborate unprecedented 3d/4f TTF-based heterobimetallic complexes of formula [(TTF-salphen)MLn(hfac)(3)]. All the structures of these compounds have been resolved by X-ray diffraction on single crystals. The structures of these complexes are formed by a TTF-salphen(2-) ligand coordinated to the 3d metal ions in the inert tetradentate N(2)O(2) site. The Ln(hfac)(3) fragment is coordinated to the (TTF-salphen)M one through the two phenolate bridges. Even if the complexes are similar in both Cu(II) and Ni(II) families, the crystal packing is different. In the first case, dimers of TTF-salphen(2-) donors constitute the organic network. In the other case, a reminiscent organic network is observed with S···S contacts. The photophysical properties of [(TTF-salphen)CuDy(hfac)(3)] (3) in chloroform solution highlight the redshift of the TTF→salphen charge transfer (400 cm(-1)) relative to the analogue excitations in (TTF-salphen)Cu, which attest to the stability of these structures in solution. Static magnetic measurements have allowed us to quantify the ferromagnetic interactions (J=+1.29 cm(-1)) between Cu(II) and Gd(III) in the [(TTF-salphen)CuGd(hfac)(3)] complex. Finally, an empirical method that consists of the comparisons of the magnetic properties of [(TTF-salphen)CuTb(hfac)(3)] with [(TTF-salphen)NiTb(hfac)(3)] and [(TTF-salphen)CuDy(hfac)(3)] with [(TTF-salphen)NiDy(hfac)(3)] has established that ferromagnetic interactions take place between Cu(II) and Tb(III) ions, whereas unusual antiferromagnetic interactions have been identified between Cu(II) and Dy(III) ions.