Simultaneous Determination of Ascorbic Acid and Uric Acid by Using a PVC/TTF‐TCNQ Composite Electrode as Detector in a FIA System

A PVC/TTF‐TCNQ composite electrode has been employed as detector in a flow injection system. The proposed method allows the simultaneous detection of ascorbic acid (AA) and uric acid (UA) in mixtures by using a FIA system in a simple manner, without pre‐treatment or modified electrode. This method is based on the amperometric determination of (a) ascorbic acid at 0.15 V and (b) both analytes at 0.35 V, being the response linear in the range 1×10^?2–4×10^?4 M for both analytes with detection limits (S/N=3) of 1.2×10^?4 M and 8.1×10^?5 M for AA and UA, respectively.     

Synthesis and characterization of MCM-48 tubular membranes

MCM-48 membranes have been prepared on alumina supports of different pore sizes. A battery of characterization techniques has been used to study the physical properties and the quality of the membranes prepared. The highest quality membranes were prepared on supports with pore size of up to 60 nm. The MCM-48 membranes were tested in the separation of gas phase mixtures and a cyclohexane/O₂ selectivity higher than 270 was obtained. The selective separation of organic compounds from inert components is a result of the cooperative effects of capillary condensation in MCM-48 pores and of the specific interactions of the permeating compounds and the membrane material.     

On the generality of a cosmological speculation based on Heisenberg's principle

In a previous work [Hernández-Bermejo, B. (1996) Heisenberg's principle: A cosmological speculation, Speculations in Science and Technology, 19, 253], it was speculated that the lack of homogeneity of the large-scale structure of the universe may be due to quantum fluctuations of space in the early universe. This was argued for a Friedmann-type universe for which both the curvature and the cosmological constant were zero. Here it is shown that the same considerations are valid for arbitrary values of the curvature and .     

Estimation of the uncertainty of mass measurements from in-house calibrated analytical balances

The uncertainty evaluation of mass measurements when using “in-house” calibrated analytical balances is revisited according to the Guide to the expression of Uncertainty Measurement (GUM). The calibration of analytical balances is discussed according to the guidelines of several bodies such as ASTM, UKAS and DKD/PTB. The remainder components of uncertainty can be estimated from the balance data sheet specifications.     

Effect of drying temperature and blanching on the degradation of chlorophyll a and b in mint (Mentha spicata Huds.) and basil (Ocimum basilicum): Analysis by high performance liquid chromatography with photodiode array detection

Summary The effect of drying conditions on the preservation of chlorophyll pigments in mint and basil have been investigated in order to determine the effects of drying temperature and whether or not there was a prior blanching.Pigments extracted from fresh and dried samples were analyzed by reversed phase high performance liquid chromatography coupled to a photodiode array detector; isocratic separation was performed on a Zorbax ODS C18 column.The purity of the chromatographic peaks of chlorophylls and breakdown products was investigated. The visible spectra of standard samples of chlorophylls and pheophytins were compared, using least squares normalization with those of peaks from the extracts of fresh and dried mint and basil. The study has shown that chlorophylls were better preserved when drying was preceded by a short blanching; if samples were not blanched before drying, the degradation of chlorophylls a and b was best prevented by drying at low temperatures.     

Molecular structure-activity relationships for the oxidation of organic compounds using mesoporous silica catalysts derivatised with bis(halogeno)dioxomolybdenum(VI) complexes

Mo K-edge XAFS spectra have been measured for ordered mesoporous silica MCM-41 grafted with the complexes [MoO2X2(thf)2] (X=Cl, Br). For grafting reactions in the absence of triethylamine, materials with 1 wt. % Mo are obtained; the Mo K-edge EXAFS results indicate the co-existence of isolated surface-fixed monomeric species [MoO2[(-O)3SiO]2(thf)(n)] and [MoO2[(-O)3SiO]X(thf)(n)]. When Et3N is used in the grafting reactions, materials with 4 wt. % Mo are obtained. The EXAFS data for the material prepared using [MoO2Cl2(thf)2] and Et3N indicate the presence of dinuclear species with two Mo(VI) centres, each with two Mo=O groups and each linked by one or two oxo bridges (Mo...Mo 3.27 A). The molybdenum centres in the material prepared using the dibromo complex comprise mainly isolated four-coordinate dioxomolybdenum(VI) and trioxomolybdenum(VI) monomeric species, with a small contribution from dimeric species. All materials were further characterised in the solid state by powder X-ray diffraction, N2 adsorption analysis, MAS NMR (13C, 29Si) and FTIR spectroscopy. The derivatised MCMs perform differently as catalysts in the liquid-phase oxidation of various olefins and alcohols with tert-butyl hydroperoxide. The highest alkene epoxidation activity was recorded for the catalysts with low metal loading, whereas the material containing oxo-bridged dimers had the highest activity for oxidation of alcohols. The recyclability of all the catalysts was tested: the catalytic activity of the derivatised materials tended to stabilize with ageing.     

Electrochemical and spectroscopic characterization of the novel charge-transfer ground state in diimine complexes of ytterbocene

The novel charge-transfer ground state found in alpha,alpha'-diimine adducts of ytterbocene (C(5)Me(5))(2)Yb(L) [L = 2,2'-bipyridine (bpy) and 1,10-phenanthroline (phen)] in which an electron is spontaneously transferred from the f(14) metal center into the lowest unoccupied (pi*) molecular orbital (LUMO) of the diimine ligand to give an f(13)-L(*)(-) ground-state electronic configuration has been characterized by cyclic voltammetry, UV-vis-near-IR electronic absorption, and resonance Raman spectroscopies. The voltammetric data demonstrate that the diimine ligand LUMO is stabilized and the metal f orbital is destabilized by approximately 1.0 V each upon complexation for both bpy and phen adducts. The separation between the ligand-based oxidation wave (L(0/-)) and the metal-based reduction wave (Yb(3+/2+)) in the ytterbocene adducts is 0.79 V for both bpy and phen complexes. The UV-vis-near-IR absorption spectroscopic data for both the neutral adducts and the one-electron-oxidized complexes are consistent with those reported recently, but previously unreported bands in the near-IR have been recorded and assigned to ligand (pi*)-to-metal (f orbital) charge-transfer (LMCT) transitions. These optical electronic excited states are the converse of the ground-state charge-transfer process (e.g., f(13)-L(*-) <--> f(14)-L(0)). These new bands occur at approximately 5000 cm(-1) in both adducts, consistent with predictions from electrochemical data, and the spacings of the resolved vibronic bands in these transitions are consistent with the removal of an electron from the ligand pi* orbital. The unusually large intensity observed in the f --> f intraconfiguration transitions for the neutral phenanthroline adduct is discussed in terms of an intensity-borrowing mechanism involving the low-energy LMCT states. Raman vibrational data clearly reveal resonance enhancement for excitation into the low-lying pi* --> pi* ligand-localized excited states, and comparison of the vibrational energies with those reported for alkali-metal-reduced diimine ligands confirms that the ligands in the adducts are reduced radical anions. Differences in the resonance enhancement pattern for the modes in the bipyridine adduct with excitation into different pi* --> pi* levels illustrate the different nodal structures that exist in the various low-lying pi* orbitals.     

Generation and reactivity of 3‐carbethoxy‐5‐phenyl‐5H,7H‐thiazolo[3,4‐c]oxazol‐4‐ium‐1‐olate

3‐Carbethoxy‐5‐phenyl‐5H,7H‐thiazolo[3,4‐c]oxazol‐4‐ium‐1‐olate was generated from (2R,4R)‐N‐ethoxyoxalyl‐2‐phenylthiazolidine‐4‐carboxylic acid and its reactivity studied. This münchnone showed low reactivity as dipole although from the reaction with dimethyl acetylenedicarboxylate the corresponding (3R)‐3‐phenyl‐17H,3H‐pyrrolo[1,2‐c]thiazole‐5,6,7‐tricarboxylate could be isolated. The thermolysis of (2R,4R)‐N‐ethoxyoxalyl‐2‐phenylthiazolidine‐4‐carboxylic acid in refluxing acetic anhydride led to the synthesis of N‐(1‐ethoxycarbonyl‐2‐phenylvinyl)‐2‐phenyl‐4‐thioxo‐1,3‐thiazolidine. The structure of methyl (2R,4R)‐N‐ethoxyoxalyl‐2‐phenylthiazoliddine‐4‐carboxylate was determined by X‐ray crystallography.