Zn(BTZ)2白色有机电致发光材料的合成及其器件制备

以PCl₃为脱水剂,将邻氨基硫酚与水杨酸脱水环化合成出2-(2-羟基苯基)苯并噻唑,并进一步将所得产物与乙酸锌反应合成出2-(2-羟基苯基)苯并噻唑螯合锌(Zn(BTZ)₂)材料。以该配合物作为发光层制备出结构为ITO/PVK:TPD/Zn(BTZ)₂/Al近白色电致发光器件,其色坐标位于白场之内(x=0.242,y=0.359),在驱动电压为16V时,亮度达3200cdm²,对应的量子效率为0.32%。进一步在Zn(BTZ)₂中掺入橙红色染料Rubrene,制成ITO/PVK:TPD/Zn(BTZ)₂:Rubrene/Al结构器件,实现了纯白色发光(色坐标值:x=0.324,y=0.343),非常接近于白色等能点,且量子效率达0.47%。最后对上述器件的发光和电学性能进行了深入的研究和探讨。     

纳米颗粒悬浮液池内泡状沸腾的实验研究

本文对纳米颗粒悬浮液在平壁面上池内沸腾进行了实验研究。实验用的纳米粒子为26 nm的铁粉和13 nm的三氧化二铝纳米粉末,基液为去离子水。分别配成体积浓度为0．1％, 1％和2％的悬浮液。实验结果表明,纳米悬浮颗粒对液体沸腾换热过程的影响会随着纳米颗粒性质,颗粒浓度及热流密度大小的不同而出现不同的效果;加入纳米颗粒后, 对基液沸腾换热的影响存在着两个相反的作用机制,它们分别为:纳米颗粒增强了液体内部的热量迁移能力(热物性的影响)和改变了加热面的表面结构特性(加热面特性的影响)。     

半参数方差误差模型的估计

本文综合近邻权函数法及最小二乘法，用两阶段最小二乘估计的方法得到了半参数EV模型中参数的估计量及其强相合性，渐近正态性。同时也得到了非参数函数的估计量及其强相合性，一致强相合性。     

量化方法研究分子结BEMP和TEMP的电子输运特性

通过结合杂化密度泛函和前线轨道理论与弹性散射格林函数方法研究了BE- MP(benzene-1,4-di-ethynyl-4-mercaptophenyl)和TEMP(thiophene-2,5-di-ethynyl-4- mercaptophenyl)两分子结的输运性质。基于杂化密度泛函方法计算两扩展分子电子结构的基础上,计算了两分子的输运性质．计算结果显示:电流增加来源于电极和分子轨道的共振;电导曲线呈现出平台特征．在此基础上从扩展分子A(Au-BEMP-Au)中间的苯环的旋转而引起电流减小的角度解释了负微分电阻现象．     

Pre-Buried ETL with Bottom-Up Strategy Toward Flexible Perovskite Solar Cells with Efficiency Over 23%

With rapid development of photovoltaic technology, flexible perovskite solar cells (f-PSCs) have attracted much attention for their light weight, high flexibility and portability. However, the power conversion efficiency (PCE) achieved so far is not yet comparable to that of rigid devices. This is mainly due to the great challenge of depositing homogeneous and high-quality perovskite films on flexible substrate. In this study, the pre-buried 3-aminopropionic acid hydroiodide (3AAH) additives into the electron transport layer (ETL) and modified the ETL/perovskite (PVK) interface by a bottom-up strategy. 3AAH treatment induced a templated perovskite grain growth and improved the quality of the ETL. By this, the residual stresses generated in PVK during the annealing-cooling process are released and converted into micro-compressive stresses. As a result, the defect density of f-PSCs with pre-buried 3AAH is reduced and the photovoltaic performance is greatly improved, reaching an exceptional PCE of 23.36%. This strategy provides a new idea to bridge the gap between flexible and rigid devices.     

Energy Transfer Induced by TADF Polymer Enables the Recycling of Excitons in Perovskite Solar Cells

Formamidinium lead triiodide (FAPbI₃) has been demonstrated as the most efficient perovskite system to date, due to its excellent thermal stability and an ideal bandgap approaching the Shockley-Queisser limit. Whereas, there are intrinsic quantum confinement effects in FAPbI₃, which lead to unwanted non-radiative recombination. Additionally, the black α-phase of FAPbI₃ is unstable under room temperature due to the significant residual tensile stress in the film. To simultaneously address the above issues, a thermally-activated delayed fluorescence polymer P1 is designed in the study to modify the FAPbI₃ film. Owing to the spectral overlap between the photoluminescence of P1 and absorption of the above-bandgap quantum wells of FAPbI₃, the Förster energy transfer occurs at the P1/FAPbI₃ interface, which further triggers the Dexter energy transfer within FAPbI₃. The exciton “recycling” can thus be realized, which reduces the non-radiative recombination losses in perovskite solar cells (PSCs). Moreover, P1 is found to introduce compressive stress into FAPbI₃, which relieves the tensile stress in perovskite. Consequently, the PSCs with P1 treatment achieve an outstanding power conversion efficiency (PCE) of 23.51%. Moreover, with the alleviation of stress in the perovskite film, flexible PSCs (f-PSCs) also deliver a high PCE of 21.40%.     

非完美条件下的非正交多址接入星地融合网络性能分析

随着星地融合网络(ISTNs)的快速发展,大量的传感器和无线设备都有无线服务的接入需求,从而对星地融合网络的频谱效率和服务质量提出了新的挑战。不同于传统的正交多址接入技术,非正交多址接入(NOMA)技术可在相同的频率下传输不同用户的信号,其被认作为提高星地融合网络频谱效率的有效方法,从而被广泛研究。目前,针对NOMA和星地融合网络的研究大多都是在理想条件下进行的,由此该文研究更加实际的情况,即在非完美串行干扰消除(SIC)、信道估计误差和同频干扰下,对星地融合网络的性能进行研究。该文在假设卫星端和地面端均采用多天线的前提下,推导了系统遍历容量的闭式表达式,验证了非完美条件对于系统性能的影响。同时蒙特卡罗仿真验证了理论分析和推导的正确性。     

Facial Expression Recognition Based on Spatial and Channel Attention Mechanisms

Wireless Personal Communications - Microarray-based gene expression profiling is an emerging method to predict, classify, diagnose and to treat cancer efficiently. The characteristics of this...     

三元配合物Tm[(C5/sub>H8NS2)3(C12H8N2)]的热化学性质研究

在无水乙醇中，用吡咯烷二硫代氨基甲酸铵(APDTC)和1,10-邻菲咯啉(o-phen·H₂O)与TmCl₃·3.65H₂O作用，合成了未见文献报道的三元固态配合物，确定它的组成为Tm[(C_{5/sub>H8NS2)3(C12H8N2)]。 用RD496-Ⅲ微量热计测定了298.15 K下水合氯化铥及两个配体在无水乙醇中的溶解焓，两个配体醇溶液的混合焓及不同温度下标题化合物液相生成反应的焓变。在实验和计算基础上，得到了液相生成反应的热力学参数(活化焓、活化熵和活化自由能)，速率常数和动力学参数(表现活化能、频率因子和反应级数)。通过合理的热化学循环，求得了298.15 K时标题化合物的固相生成反应焓变；推导了用该热量计测定固态物质比热容的计算式，并测定了题目配合物298.15 K的比热容。用RBC-Ⅱ精密转动弹热量计测定了题目配合物的恒容燃烧热， 计算了它们的标准摩尔燃烧焓和标准摩尔生成焓。}     

动圈式扬声器温度失效仿真

常态下测量了典型小功率动圈式扬声器的静态参数,根据Small小信号参数建立了扬声器温度失效模型;结合VisualC 和Matlab计算机语言的优势,编制了相应的仿真软件;对给定动圈式扬声器中可能出现的音圈短路、功率过载和意外结构性故障进行了计算机仿真,结果表明,封闭工作区间内温度急剧升高是导致扬声器失效的主要原因,与有限元模型计算结果相比较,最大误差分别为2.63%(16W,纸骨架)和3.36%(16W,铝骨架)。