Calorimetric study of the immersion heats of lead(II) and chromium(VI) from aqueous solutions of Colombian coffee husk

Summary This work shows the result of the study of the Pb(II) and Cr(VI) ions adsorption by means of a Calvet type calorimeter of heat conduction that can operate at 150şC. The calorimeter was electrically calibrated to establish its sensitivity and reproducibility, obtaining K=12.95±0.05 W V^-1 and chemically it was examined with tris-(hydroxymethyl)-aminomethane (THAM)-HCl system, obtaining ΔH= -30.91±0.03 kJ mol^-1. The activated carbon sample obtained from coffee husk and the calorimetric results obtained were related to other techniques used to perform this type of studies.     

Toward direct determination of conformations of protein building units from multidimensional NMR experiments. V. NMR chemical shielding analysis of N-formyl-serinamide,a model for polar side-chain containing peptides

Knowledge of chemical shift-structure relationships could greatly facilitate the NMR chemical shift assignment and structure refinement processes that occur during peptide/protein structure determination via NMR spectroscopy. To determine whether such correlations exist for polar side chain containing amino acid residues the serine dipeptide model, For-L-Ser-NH(2), was studied. Using the GIAO-RHF/6-31+G(d) and GIAO-RHF/TZ2P levels of theory the NMR chemical shifts of all hydrogen ((1)H(N), (1)H(alpha), (1)H(beta1), (1)H(beta2)), carbon ((13)C(alpha), (13)C(beta), (13)C') and nitrogen ((15)N) atoms have been computed for all 44 stable conformers of For-L-Ser-NH(2). An attempt was made to establish correlation between chemical shift of each nucleus and the major conformational variables (omega(0), phi, psi, omega(1), chi,(1) and chi(2)). At both levels of theory a linear correlation can be observed between (1)H(alpha)/phi, (13)C(alpha)/phi, and (13)C(alpha)/psi. These results indicate that the backbone and side-chain structures of For-L-Ser-NH(2) have a strong influence on its chemical shifts.     

Azocalixarenes: Synthesis, Characterization, Complexation, Extraction, Absorption Properties and Thermal Behaviours

Azocalixarenes, which have a conjugated chromophore azo (–N=N–) group in p-positions, are synthesized in “one-pot” procedures in satisfactory yields. Their structures in the solid and solution are elucidated by UV–vis, FT-IR, ¹H and ¹³C NMR spectroscopic methods as well as elemental analysis techniques. Some of them are complexed with metal ions (alkali, alkaline-earth and transition metal ions) under neutral conditions. A wide variety of applications is expected by the functionalization of the side arms. The selective liquid–liquid extraction of various alkali, alkaline-earth and transition metal cations from the aqueous phase to the organic phase is carried out by using azocalixarenes. Furthermore, the synthesized azocalixarenes are utilized for selective extraction of Fe³⁺ cations from the aqueous phase to the organic phase. The effects of varying pH and solvent upon the absorption ability of azocalixarenes substituted with electron-donating and electron-withdrawing groups at their o-, m-, p-positions are examined. The thermal behaviours of azocalixarenes containing upper rim functionalized groups are investigated by means of thermogravimetry (TG), differential thermal analysis (DTA) and differential thermogravimetry (DTG).     

Vibrational spectroscopic studies of three dimensional host lattices formed by pyrazine bridges between tetracyanonickelate layers

Three dimensional host lattices have been developed by forming bridges with bidentate pyrazine molecules between adjacent tetracyanonickelate polymeric layers of Ni(II) or Cd(II). The Fourier-transform IR and Raman spectra (4000-200 cm^–1) of the compounds with the general formula M(pyz)Ni(CN)₄, (where M = Ni or Cd) are reported. These host lattices can include benzene molecules but it is found that aniline molecules cannot be included in these structures. They, however, form complexes with the formula M(an)₂Ni(CN)₄, by replacing pyrazine ligands. A monodentate pyrazine complex of Cd(II) with the formula Cd(pyz)₂Ni(CN)₄ has also been prepared.     

A novel type of Si-containing poly(urethane-imide)s: synthesis, characterization and electrical properties

A novel type of a Si-containing poly(urethane-imide) (PUI) was prepared by two different methods. In the first method, Si-containing polyurethane (PU) prepolymer having isocyanate end groups was prepared by the reaction of diphenylsilanediol (DSiD) and toluene diisocyanate (TDI). Subsequently the PU prepolymer was reacted with pyromellitic dianhydride (PMDA) or benzophenonetetracarboxylic dianhydride (BTDA) in N-methyl pyrolidone (NMP) to form Si-containing modified polyimide directly. In the second method, PU prepolymer was reacted with diaminodiphenylether (DDE) or diaminodiphenylsulfone (DDS) in order to prepare an amine telechelic PU prepolymer. Finally, the PU prepolymer having diamine end groups was reacted with PMDA or BTDA to form a Si-containing modified polyimide. Cast films prepared by second method were thermally treated at 160 °C to give a series of clear, transparent PUI films. Thermogravimetric analysis indicated that the thermal degradation of PUI starts at 265 °C which is higher than degradation temperature of conventional PU, confirming that the introduction of imide groups improved the thermal stability of PU.To characterize the modified polyimides and their films, TGA, FTIR, SEM and inherent viscosity analyses were carried out. The dielectrical properties were investigated by the frequency-capacitance method. Dielectric constant, dielectric breakdown strength, moisture uptake and solubility properties of the films were also investigated.     

Electrochemical Properties and ESR Characterization of Mixed Valence alpha-[XMo(3)(-)(x)()V(x)()W(9)O(40)](n)()(-) Heteropolyanions with X = P(V) and Si(IV), x = 1, 2, or 3

Electrochemical behavior of the alpha-[SiMo(3)(-)(x)()V(x)()W(9)O(40)]((4+)(x)()())(-) and alpha-[PMo(3)(-)(x)()V(x)()W(9)O(40)]((3+)(x)()())(-) anions with x = 1, 2, or 3 were studied. Electrochemical reduction of each compounds was consistent with its Mo/V ratio, reduction of vanadium and molybdenum atoms occurring in the +0.6 to -0.6 V potential range. The one-electron-reduced species were prepared by electrolysis and then characterized by ESR spectroscopy. The g and A values for V(4+)ions appeared to depend on the nature of the surrounding atoms (Mo(VI), W(VI), and V(V)). In solution at 330 K, the ESR spectrum of the protonated alpha-H[SiMoV(IV)VW(9)O(40)](6)(-) anion displayed 29 superhyperfine lines which were related to the partial localization of the electron on one vanadium nucleus. The ESR spectra at room temperature for the divanadium-substituted anions showed a strong anisotropy of the A tensor which would be related to the electron transfer along a preferential axis. An isolated V(4+) signal was not observed, even at 12 K, indicating that the electron is never firmly trapped on one single vanadium atom.     

Azocalixarenes. 6: Synthesis, complexation, extraction and thermal behaviour of four new azocalix[4]arenes

Four new azocalix[4]arenes {5,11,17,23-tetrakis[(2-hydroxy-5-tert-butylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (1), 5,11,17,23-tetrakis[(2-hydroxy-5-nitro phenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (2), 5,11,17,23-tetrakis[(2-amino-5-carboxylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (3) and 5,11,17,23-tetrakis[(1-amino-2-hydroxy-4-sulfonicacidnapthylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (4)} have been synthesized from p-tert-butylphenol, p-nitrophenol, p-aminobenzoic acid and 1-amino-2-hydroxy-4-sulphonic acid by diazo coupling reaction with p-aminocalix[4]arene. The resulting ligands (1–4) were treated with three transition metal salts (e.g., CuCl₂·2H₂O, NiCl₂·6H₂O or CoCl₂·6H₂O). Cu(II), Ni(II) and Co(II) complexes of the azocalix[4]arene derivatives were obtained and characterized by UV-vis, IR, ¹H-NMR spectroscopic techniques and elemental analysis. All the complexes have a metal:ligand ratio of 2:1. The Cu(II) and Ni(II) complexes of azocalix[4]arenes are square-planar, while the Co(II) complexes of azocalix[4]arenes are octahedral with water molecules as axial ligands. The solvent extraction of various transition metal cations from the aqueous phase to the organic phase was carried out by using azocalix[4]arenes (1–4). It was found that, azocalix[4]arenes 1, 2 and 3 examined selectivity for transition metal cations such as Ag⁺, Hg⁺ and Hg²⁺. In addition, the thermal stability of metal:azocalix[4]arene complexes were also reported. Dedicated to Prof. Dr. Mustafa Yılmaz on the occasion of his 50th birthday     

Diterpenoid Alkaloids of Delphinium buschianum Grossh.

From the aerial parts of Delphinium buschianum Grossh ., collected in Turkey, a new diterpenoid alkaloid 1 , named budelphine, was isolated along with the known diterpenoid alkaloids karakoline ( 2 ), 18‐hydroxy‐14‐O‐methylgadesine ( 3 ), delsoline ( 4 ), lapaconidine ( 5 ), columbianine ( 6 ), 14‐benzoylneoline ( 7 ), and hetisine ( 9 ). The structure of 1 was established on the basis of ¹H‐, ¹³C‐, DEPT, ¹H,¹H‐COSY, NOESY, HSQC, and HMBC NMR studies.     

Structural and transport properties of Sn–Mg alloys

In this work, the structural and transport properties of Mg-doped Sn-based alloys have been investigated. The temperature-dependent transport and structural properties of Sn–Mg alloys were investigated for five different samples (Pure Sn, Sn-1.0 wt% Mg, Sn-2.0 wt% Mg, Sn-6.0 wt% Mg and Pure Mg). Scanning electron microscopy (SEM), X-ray diffraction and energy dispersive X-ray analysis measurements were carried out in order to clarify the structural properties of the samples. It was found that the samples had tetragonal crystal symmetry, except for pure Mg which had hexagonal crystal symmetry. We also found that the cell parameters changed slightly with the addition of Mg element. The SEM micrographs of the samples showed that they had smooth surfaces with a clear grain boundary. The electrical and thermal conductivity of the samples were measured by four-point probe and the radial heat flow method, respectively. The electrical resistivity of the samples increased almost linearly with the increasing temperature. The thermal conductivity values ranged between 0.60 and 1.00 W/Km, while they decreased slightly with temperature and increased with Mg composition. The thermal conductivity values of the alloys were in between the values of pure Sn and Mg. The thermal conductivity results of the alloys were compared with other available results, and a good agreement was seen between the results. In addition, the temperature coefficients of electrical resistivity and thermal conductivity were determined; these were independent of the composition of the alloying elements.