Regiospecifically controlled formation of tetrasubstituted tributyltin ketone enolates catalyzed by a palladium complex

The palladium-catalyzed hydrostannolysis of α-disubstituted allyl β-keto esters yields the corresponding tributyltin β-keto carboxylates which loose carbon dioxide at very moderate temperature, thus leading to the regiospecific formation of tributyltin tetrasubstituted enolates.     

The algorithm of substructure recognition in organic compounds by the artificial intelligence method on the basis of IR-spectra

An algorithm for identification of the IR-active substructures has been developed. In the algorithm, which recognizes about 100 substructures, the analysis is based on three parameters for a set of characteristic bands: position, intensity and arbitrarily chosen diagnostics. The algorithm provides two ways of identification: a. standard method, which compares an IR spectrum with the correlation tables contained in the algorithm, b. dynamic method advanced here which consists in that the recognized substructures cause blocking of their characteristic bands making them almost inaccessible for further analysis.     

Vibrational Spectroscopic Studies on the Hofmann Type Clathrates: M(1,6-diaminohexane)Ni(CN) 4 .G (M = Co, Ni or Cd; G = chlorobenzene, 1,2-, 1,3- or 1,4-dichlorobenzene)

New Hofmann-diaminohexane(dahxn)-type clathrates of the form M(1,6-dahxn)Ni(CN)₄.G (M = Co, Ni or Cd; G = chlorobenzene, 1,2-, 1,3 or 1,4-dichlorobenzene) were prepared inpowder form and their infrared spectra are reported. The spectral data suggest that these compounds are similar in structure to those of the Hofmann-diam-type clathrates. Their structure consists of planar polymeric layers, {M–Ni(CN)₄}, formedfrom Ni(CN)₄ anions coordinated to the bridging 1,6-diaminohexane molecules bound directly to the metal (M). The M atoms are bound to four N atoms of the CN ions and, the Ni atoms are surrounded by four C atoms of the CN groups in a square-planar layer.     

A vibrational spectroscopic study of the adsorption of 4,4′-bipyridyl by sepiolite and smectite group clay minerals from Anatolia (Turkey)

The adsorption of 4,4-bipyridyl by natural sepiolite and smectite group clay minerals (bentonite, hectorite and saponite) from Anatolia (Turkey) has been studied using vibrational spectroscopy. Investigation of Fourier-transform infrared and Fourier-transform Raman spectra of adsorbed 4,4-bipyridyl indicate the presence of chemisorbed species. However, any evidence for the generation of anionic species on the surface of the phyllosilicates has not been detected. It is proposed that the adsorbed bipyridyl molecules on sepiolite are centrosymmetric and H-bonded to the surface hydroxyls through both the nitrogen lone pairs as bidentate ligands. The adsorbed bipyridyl molecules on the smectite group clays are coordinated to exchangeable cations both directly and also indirectly through water as monodentate ligands. XRD patterns of the clays studied are also recorded.     

About the Keggin isomers: crystal structure of [N(C4H9)4]-gamma-[SiMo2W10O40]n- (n= 4 or 6)

The tetrabutylammonium gamma-dodecatungstosilicate has been crystallized in a 6/1 acetonitrile/water solvent. An X-ray single-crystal analysis was carried out on [N(C4H9)4]4-gamma-[SiW12O40] which crystallizes in the orthorhombic system, space group P2(1)2(1)2(1), with a = 19.0881(3) A, b = 21.4435(3) A, c = 26.0799(1) A, V = 10674.9(2) A3, Z = 4, and rho(calcd) = 2.392 g/cm3. The idealized C2v arrangement of the anion results from the rotation of 60 degrees of two trigonal [W3O13] groups in the Keggin anion. Taking as reference the geometrical characteristics of the Keggin anion, it appears that the bond lengths and bonds angles within the four [W3O13] groups are not significantly modified while the mu-oxo junctions between the two rotated groups and those between the two unrotated groups involve more acute and opened W-O-W angles, respectively. The syntheses and 183W NMR characterizations of the mixed gamma-[SiW10Mo2O40]n- compounds corresponding to the oxidized (Mo(VI); n = 4) and to the two electron-reduced (Mo(V); n = 6) anions are reported. Structural analysis by 183W NMR has proved unambiguously that the C2v structure of the gamma-[SiW10O36]8- subunit is retained in both the compounds. The electronic behavior of the series gamma-[SiW10M2E2O36]6- (M = Mo or W; E = O or S) is examined, compared and related to 183W NMR data.     

Electroosmosis through a Cation-Exchange Membrane: Effect of an ac Perturbation on the Electroosmotic Flow

Electroosmosis experiments through a cation-exchange membrane have been performed using NaCl solutions in different experimental situations. The influence of an alternating (ac) sinusoidal perturbation, of known angular frequency and small amplitude, superimposed to the usual applied continuous (dc) signal on the electroosmotic flow has been studied. The experimental results show that the presence of the ac perturbation affects the electroosmotic flow value, depending on the frequency of the ac signal and on the solution stirring conditions. In the frequency range studied, two regions have been observed where the electroosmotic flow reaches a maximum value: one at low frequencies (Hz); and another at frequencies of the order of kHz. These regions could be related to membrane relaxation phenomena.     

Development of a CZE Method for the Determination of Olmesartan Medoxomil in Tablets

A CZE method was developed and validated for the analysis of Olmesartan medoxomil (OLMD) in tablets. The influences of pH, buffer concentration, applied voltage and capillary temperature on the migration time of OLMD were investigated. About 50 mM pH 6.5 phosphate buffer were used as background electrolyte. The optimum instrument parameters were found to be 30 °C temperature with 30 kV applied voltage and diode array detection was carried out at 210 nm. OLMD was hydrodynamically injected (P _inj  = 50 mbar, t _inj  = 3 s) and an internal standard, diflunisal (IS), was used to improve the precision and repeatability. Under these conditions, the migration time of OLMD was 2.32 min and the total analysis time was shorter than 5 min. Linearity range for the developed method was found to be 2.0–50.0 μg mL^?1 and the limit of detection was 0.5 μg mL^?1. The developed method was applied for the analysis of OLMD in pharmaceutical tablet formulations.     

Novel reaction systems for the synthesis of O-glucosides by enzymatic reverse hydrolysis

Our studies are presented to replace alcohols as solvents in reverse hydrolytic reactions catalyzed by immobilized β-glucosidase to synthesize O-substituted β-d-glucopyranosides in preparative-scale. We found that 1,2-diacetoxyethane is a suitable solvent and O-alkyl or aryl β-d-glucosides were synthesized in moderate yields (after isolation 12-19%). In these reactions proportion of glucose and glucosyl acceptor hydroxy compounds was 1:20. We suggest that 1,2-diacetoxyethane can be useful not only for alcohols but for other glucosyl donor compounds unsuitable for the role of solvent (e.g., phenols) in the synthesis of O-β-d-glucosides by reverse hydrolysis.     

Determination of Rosuvastatin in Pharmaceutical Formulations by Capillary Zone Electrophoresis

A capillary zone electrophoretic method with diode array detection was developed and validated for the determination of rosuvastatin calcium in pharmaceutical formulations. Using fused-silica capillary (i.d. 50.0 μm, total length 48.5 cm and effective length 40.0 cm), the influence of the buffer composition, buffer pH and buffer concentration, as well as organic modifier, applied voltage, capillary temperature and injection time were investigated to optimize the method. Optimum results were obtained with 50.0 mM borate buffer at pH 9.5, capillary temperature 30 °C and applied voltage 25 kV. The samples were injected hydrodynamically for 5 s at 50 mbar. Detection wavelength was set at 243 nm. Diflunisal was used as internal standard. The migration times of rosuvastatin calcium and diflunisal were 3.20 ± 0.01 and 4.20 ± 0.02. The total time of analysis was <6 min. The method was validated for rosuvastatin calcium determination in pharmaceutical formulations through following performance parameters: stability, linearity, sensitivity, precision, accuracy, recovery, selectivity, robustness and ruggedness. The linear calibration range was 3.00–200.00 μg mL^?1 and the limits of detection and quantification were 1.00 and 3.00 μg mL^?1 with RSD of 4.38 and 3.09%. The proposed method was applied for the determination of rosuvastatin calcium in its pharmaceutical formulation.