Experimental study of the director pattern dynamics in the vicinity of the Fréedericksz twist geometry

We present an experimental study of the transient periodic structures appearing in the nematic director field in the magnetically induced reorientation of the director in the vicinity of the twist Fréedericksz geometry. Thin nematic samples (50?µm thick) were exposed to magnetic fields of variable intensity and orientation relative to the surface aligning direction of the sample. The director reorientation was induced by a rapid rotation of the sample in the static magnetic field producing a misalignment between the director and the magnetic field. The director field was optically monitored during the reorientation process and the transient periodic structures were characterized. Two types of periodic structures could be identified, namely bands and walls. Walls grow from bands close to the twist Fréedericksz geometry. The time dependence of the wave length and inclination of the periodic structures was obtained as a function of the magnetic field intensity and orientation relative to the surface aligning direction of the sample. The results for the bands are compared with the predictions of a model that we specifically developed to account for the non-orthogonal field orientations. It is seen that our model can account rather well for the experimental results considering that it uses only the field rotation time as adjustable parameter. All other model parameters are known.     

Switching the dipole moment for 5CB on and off

A Commentary on the paper ”A molecular dynamics study of the nematic phase of 4‐n‐pentyl‐4′‐cyanobiphenyl?, by S. J. Picken, W. F. van Gunsteren, P. Th. van Duijnen and W. H. de Jeu. First published in Liquid Crystals, 6, 357‐371 (1989).     

Major and Trace Elements in Spruce Needles from Urban Areas: Some Aspects of Analysis in Environmental Studies

Main and trace elements in samples of spruce needles from urban areas in Poland and Norway were analysed using the ICP-AES method. Concentrations of Al, B, Ba, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, P, Sr, Ti, V and Zn were measured in needles from conifer trees growing in different locations. Two different procedures of laboratory sample preparation were compared and discussed. Different washing procedures were examined and compared. For quality control of analytical measurements, Standard Reference Material BCR CRM 101 (spruce needles from Europe) was used. Synergistic and antagonistic relationships between elements in spruce needles were investigated. Applicability of spruce needles in biomonitoring of environmental metal pollution was discussed.     

Investigation of the solubilization of car-emitted Pt,Pd and Rh in street dust and spiked soil samples

A sequential extraction procedure (three-step), proposed by the Standards, Measurements and Testing Programme (formerly BCR) of the European Union, was applied to street dust and spiked soil samples for the determination of PGEs. Analyses were carried out using inductively coupled plasma-mass spectrometry (ICP-MS). The results indicate that up to 5% from Pt, 70% from Pd and 14% from Rh are in mobile forms in street dust. The results for the soil samples spiked with crushed catalytic converter are significantly lower indicating that PGEs are oxidised more efficiently in natural conditions. Additionally Pt and Pd bound to humic acids were investigated.     

Synthesis of Naturally Occurring Ld-HepP Containing Disaccharides

ABSTRACT

Diastereoselective hydroxymethylation of a suitably protected α-D-manno-hexodialdo-1,5-pyranoside with the Grignard reagent derived from (phenyldimethylsilyl)methyl chloride gives, after additional protecting group manipulations, an easy access to one donor and two acceptors of LD-Hepp. The latter derivatives could be applied successfully for the preparation of the disaccharides α-D-GlcpN-(1-7)-L-α-D-Hepp-OMe and L-α-D-Hepp-(1-6)-L-α-D-Hepp-OMe.     

Structure–Reactivity Relationships in the Hydrogenation of Carbon Dioxide with Ruthenium Complexes Bearing Pyridinylazolato Ligands

Pyridinylazolato (N–N′) ruthenium(II) complexes of the type [(N–N′)RuCl(PMe₃)₃] have been obtained in high yields by treating the corresponding functionalised azolylpyridines with [RuCl₂(PMe₃)₄] in the presence of a base. ¹⁵N NMR spectroscopy was used to elucidate the electronic influence of the substituents attached to the azolyl ring. The findings are in agreement with slight differences in the bond lengths of the ruthenium complexes. Furthermore, the electronic nature of the azolate moiety modulates the catalytic activity of the ruthenium complexes in the hydrogenation of carbon dioxide under supercritical conditions and in the transfer hydrogenation of acetophenone. DFT calculations were performed to shed light on the mechanism of the hydrogenation of carbon dioxide and to clarify the impact of the electronic nature of the pyridinylazolate ligands.     

On the “Tertiary Structure” of Poly‐Carbenes; Self‐Assembly of sp3‐Carbon‐Based Polymers into Liquid‐Crystalline Aggregates

The self‐assembly of poly(ethylidene acetate) (st‐PEA) into van der Waals‐stabilized liquid‐crystalline (LC) aggregates is reported. The LC behavior of these materials is unexpected, and unusual for flexible sp³‐carbon backbone polymers. Although the dense packing of polar ester functionalities along the carbon backbone of st‐PEA could perhaps be expected to lead directly to rigid‐rod behavior, molecular modeling reveals that individual st‐PEA chains are actually highly flexible and should not reveal rigid‐rod induced LC behavior. Nonetheless, st‐PEA clearly reveals LC behavior, both in solution and in the melt over a broad elevated temperature range. A combined set of experimental measurements, supported by MM/MD studies, suggests that the observed LC behavior is due to self‐aggregation of st‐PEA into higher‐order aggregates. According to MM/MD modeling st‐PEA single helices adopt a flexible helical structure with a preferred trans‐gauche syn‐syn‐anti‐anti orientation. Unexpectedly, similar modeling experiments suggest that three of these helices can self‐assemble into triple‐helical aggregates. Higher‐order assemblies were not observed in the MM/MD simulations, suggesting that the triple helix is the most stable aggregate configuration. DLS data confirmed the aggregation of st‐PEA into higher‐order structures, and suggest the formation of rod‐like particles. The dimensions derived from these light‐scattering experiments correspond with st‐PEA triple‐helix formation. Langmuir–Blodgett surface pressure–area isotherms also point to the formation of rod‐like st‐PEA aggregates with similar dimensions as st‐PEA triple helixes. Upon increasing the st‐PEA concentration, the viscosity of the polymer solution increases strongly, and at concentrations above 20 wt % st‐PEA forms an organogel. STM on this gel reveals the formation of helical aggregates on the graphite surface–solution interface with shapes and dimensions matching st‐PEA triple helices, in good agreement with the structures proposed by molecular modeling. X‐ray diffraction, WAXS, SAXS and solid state NMR spectroscopy studies suggest that st‐PEA triple helices are also present in the solid state, up to temperatures well above the melting point of st‐PEA. Formation of higher‐order aggregates explains the observed LC behavior of st‐PEA, emphasizing the importance of the “tertiary structure” of synthetic polymers on their material properties.     

Transition Metal Complexes of a Salen–Fullerene Diad: Redox and Catalytically Active Nanostructures for Delivery of Metals in Nanotubes

A covalently‐linked salen–C₆₀ (H₂L) assembly binds a range of transition metal cations in close proximity to the fullerene cage to give complexes [M(L)] (M=Mn, Co, Ni, Cu, Zn, Pd), [MCl(L)] (M=Cr, Fe) and [V(O)L]. Attaching salen covalently to the C₆₀ cage only marginally slows down metal binding at the salen functionality compared to metal binding to free salen. Coordination of metal cations to salen–C₆₀ introduces to these fullerene derivatives strong absorption bands across the visible spectrum from 400 to 630 nm, the optical features of which are controlled by the nature of the transition metal. The redox properties of the metal–salen–C₆₀ complexes are determined both by the fullerene and by the nature of the transition metal, enabling the generation of a wide range of fullerene‐containing charged species, some of which possess two or more unpaired electrons. The presence of the fullerene cage enhances the affinity of these complexes for carbon nanostructures, such as single‐, double‐ and multiwalled carbon nanotubes and graphitised carbon nanofibres, without detrimental effects on the catalytic activity of the metal centre, as demonstrated in styrene oxidation catalysed by [Cu(L)]. This approach shows promise for applications of salen–C₆₀ complexes in heterogeneous catalysis.     

The BIOREMA project—part 3: International interlaboratory comparison for bio-ethanol test methods

The main objective of the reference materials for biofuel specifications (BIOREMA) project is the development of two test materials (one bio-ethanol material and one biodiesel material) with well-established reference values. Of a series of three papers, this part describes the material preparation, homogeneity study, stability study, and characterisation of the bio-ethanol material. The test material thus obtained was used in an interlaboratory comparison (ILC) to assess current practices and comparability amongst laboratories providing bio-ethanol testing services. Only 13 participants provided data, resulting in a small dataset for evaluation. Further, it appeared that for a number of laboratories, there was not sufficient material for the determination of all requested parameters. In most cases, as far as the data permit, it can be concluded that the consensus values (based on participant’s results) are in good agreement with the reference or the BIOREMA values (obtained by NMIs participating in the project). For three parameters, namely ethanol content, water content, and density, there is good agreement between the reference and consensus values. For these parameters, the reproducibility standard deviation is close to, or even smaller than, the expanded uncertainty associated with the reference value. A number of parameters show very poor reproducibility, for example, pH_e, electrolytic conductivity, and acidity. The same applies to sodium and copper content, which are very low and therefore challenging parameters to measure accurately. The results of the ILC underpin the need for certified reference materials and demonstrate the requirement for more robust quality control to improve the precision and trueness of the results from testing laboratories.