Use of biosensors for rapid drug residue analysis without sample deconjugation or clean-up: a possible way forward.

The drug salbutamol (SBL) is a beta-agonist that may be used illegally as an animal growth promoter. SBL is also a good example of a drug which is excreted in the form of glucuronides and sulfates. Such metabolites cause complexities in analysing for the presence of drug residues. In the majority of cases a process of deconjugation and sample clean-up is required prior to analysis. This is both time consuming and causes some loss of accuracy. In this study, the urine of calves treated with SBL orally for 3 d was collected during and after medication. Samples were assayed before and after hydrolysis by two different methods, radioimmunoassay (RIA) and a newly developed biosensor immunoassay (BIA). Some samples were also analysed by GC-MS. The results clearly showed that both screening assays (RIA and BIA) found high concentrations of SBL residues throughout the study. This was especially true in the BIA method. It was also demonstrated that urine sample analysis without the need for deconjugation or clean-up could be achieved. Results obtained by GC-MS tended to be an order of magnitude lower than the corresponding screening test results. This work showed that biosensor based veterinary drug residue testing procedures can be developed which can generate results in real time without the need for time consuming sample preparation.     

Aluminium alkyl and aryloxide complexes of pyrazine and bipyridines: synthesis and structure

The reaction of AlMe(3) and [((t)Bu)(2)Al(micro-OPh)](2) with pyrazine (pyz), 4,4'-bipyridine (4-4'-bipy), 1,2-bis(4-pyridyl)ethane (bpetha) and 1,2-bis(4-pyridyl)ethylene (bpethe) yields (Me(3)Al)(2)(micro-pyz)(1), (Me(3)Al)(2)(micro-4,4'-bipy)(2), (Me(3)Al)(2)(micro-bpetha)(3), (Me(3)Al)(2)(micro-bipethe)(4), Al((t)Bu)(2)(OPh)(pyz)(5), [((t)Bu)(2)Al(OPh)](2)(micro-4,4-bipy)(6a), [((t)Bu)(2)Al(OPh)](2)(micro-bpetha)(7a), [((t)Bu)(2)Al(OPh)](2)(micro-bipethe)(8a). Compounds 1-4, 6a and 7a have been confirmed by X-ray crystallography. In solution compounds 1-4 undergo a rapid ligand-dissociation equilibrium resulting in a time-average spectrum in the (1)H NMR. In contrast, the solution equilibria for compounds 5-8a are sufficiently slow such that the mono-aluminium compounds may be observed by (1)H NMR spectroscopy: Al((t)Bu)(2)(OPh)(4,4-bipy)(6b), Al((t)Bu)(2)(OPh)(bpetha)(7b) and Al((t)Bu)(2)(OPh)(bpethe)(8b). The inability to isolate [((t)Bu)(2)Al(OPh)](2)(micro-pyz) and the relative stability of each complex is discussed with respect to the steric interactions across the bridging ligand (L) and the electronic effect on one Lewis acid-base interaction by the second Lewis acid-base interaction on the same ligand.     

Physicochemical characterization of degradable thermosensitive polymeric micelles

Amphiphilic AB block copolymers consisting of thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol), pHPMAmDL-b-PEG, were synthesized via a macroinitiator route. Dynamic light scattering measurements showed that these block copolymers form polymeric micelles in water with a size of around 50 nm by heating of an aqueous polymer solution from below to above the critical micelle temperature (cmt). The critical micelle concentration as well as the cmt decreased with increasing pHPMAmDL block lengths, which can be attributed to the greater hydrophobicity of the thermosensitive block with increasing molecular weight. Cryogenic transmission electron microscopy analysis revealed that the micelles have a spherical shape with a narrow size distribution. 1H NMR measurements in D2O showed that the intensity of the peaks of the protons from the pHPMAmDL block significantly decreased above the cmt, indicating that the thermosensitive blocks indeed form the solidlike core of the micelles. Static light scattering measurements demonstrated that pHPMAmDL-b-PEG micelles with relatively large pHPMAmDL blocks possess a highly packed core that is stabilized by a dense layer of swollen PEG chains. FT-IR analysis indicated that dehydration of amide bonds in the pHPMAmDL block occurs when the polymer dissolved in water is heated from below to above its cmt. The micelles were stable when an aqueous solution of micelles was incubated at 37 degrees C and at pH 5.0, where the hydrolysis rate of lactate side groups is minimized. On the other hand, at pH 9.0, where hydrolysis of the lactic acid side groups occurs, the micelles started to swell after 1.5 h of incubation and complete dissolution of micelles was observed after 4 h as a result of hydrophilization of the thermosensitive block. Fluorescence spectroscopy measurements with pyrene loaded in the hydrophobic core of the micelles showed that when these micelles were incubated at pH 8.6 and at 37 degrees C the microenvironment of pyrene became increasingly hydrated in time during this swelling phase. The results demonstrate the potential applicability of pHPMAmDL-b-PEG block copolymer micelles for the controlled delivery of hydrophobic drugs.     

Capillary isoelectric focusing-mass spectrometry for shotgun approach in proteomics

We report on capillary isoelectric focusing-mass spectrometry (CIEF-MS) of complex peptide mixtures in the absence of carrier ampholytes. Furthermore, the use of low concentrations of carrier ampholytes as mere spacers is investigated. Carrier ampholytes are complex mixtures of amphoteric compounds with high buffering capacity. Since all peptides are amphoteric compounds by themselves, the use of carrier ampholytes may be superfluous to establish a stable pH gradient in CIEF analysis of protein digests. Our research showed that when carrier ampholytes are omitted, the analyte ions are not focused at their isoelectric point. The analytes are charged, leading to electrophoretic mobility uncharacteristic for CIEF. The method was tested for a five-protein-mixture at 0.02 mg/mL per protein and 0.05 mg/mL per protein. At the lower concentration, the analytes were stacked during the focusing process in only a limited length of the capillary. Therefore, the higher concentration led to better separation efficiency. It was found that at low concentration (0.20%) the carrier ampholytes could work as spacers. Though it led to sensitivity losses of 15-45%, this was compensated by the higher separation efficiencies seen. The method was evaluated with an eight-protein-mixture, of which all could be identified after performing MS/MS.     

Raman imaging of PLGA microsphere degradation inside macrophages

Understanding the degradation behavior of polymeric microspheres is crucial for the successful application of such devices in controlled drug delivery. The degradation mechanism of poly(lactic-co-glycolic acid) (PLGA) microspheres inside phagocytic cells is not known, but different models for degradation in aqueous solution have been proposed. We have used confocal Raman spectroscopy and imaging to study the intracellular degradation of PLGA microspheres inside individual macrophages. Our results show that ingested microspheres degrade in a heterogeneous manner, with a more rapid degradation in the center. Comparison of Raman spectra from degrading beads with those of uningested beads reveals that ester hydrolysis occurs throughout the phagocytosed microspheres, with a selective loss of glycolic acid units. Furthermore, we show that PLGA degradation is a cell-mediated process, possibly caused by the low pH of the phagosome and/or the presence of hydrolytic enzymes. In conclusion, we have demonstrated that the chemical composition of degrading polymers inside cells can be probed by Raman spectral imaging. This technique will expand the capabilities of investigating biomaterial degradation in vivo.     

Site-isolation effects in a dendritic nickel catalyst for the oligomerization of ethylene

Dendrimers, specifically suited to construct site-isolated groups due to their well-defined hyperbranched structure, have been used as a ligand design element for the construction of nickel catalysts for ethylene oligomerization. The dendritic P,O ligand indeed suppresses the formation of inactive bis(P,O)Ni complexes in toluene, as is evident from NMR studies, and, as a consequence, outperforms the parent ligand in catalysis in this solvent. The dendritic effect observed in methanol is more subtle because both the dendritic ligand 1 and the parent 2 form bis(P,O)nickel complexes in solution according to NMR spectroscopy. Unlike the parent complex 8, the dendritic bis(P,O)Ni complex 7 derived from dendrimer ligand 1 is able to dissociate to a mono-ligated species under catalytic conditions, that is, 40 bar ethylene and 80 degrees C, which can enter the catalytic cycle. Indeed, dendritic ligand 1 gives much more active nickel catalysts for the oligomerization in methanol than does 2.     

Local dense structural heterogeneities in liquid water from ambient to 300 MPa pressure: evidence for multiple liquid-liquid transitions.

Difference and double-difference near-infrared DO-D and HO-H stretching overtone (2nuOD and 2nuOH) spectroscopy and a rigorous (physically substantiated) band deconvolution technique were applied to reveal three different kinds of inherent (interstitial) structures of liquid water, which determine its high density (compared to ice lh under ambient conditions), its compressibility (under hydrostatic pressure, up to 300MPa), and its high fragility (manifested under temperature variation). Our data processing allowed the rigorous discrimination of up to six vibrational components. On the basis of an extensive comparative analysis combined with available structural data (X-ray and neutron scattering) and molecular dynamics (MD) simulations for liquid water, as well as with experimental and computed data for small non-tetrahedrally arranged water clusters, the major four components could be ascribed to: i) The basic lh icelike substructure; ii) the temperature-dependent remote interstitial "defects" due to tetrahedral displacements (primarily responsible for transport properties); iii) the interstitial "defects" most probably arranged in quasiplanar noncyclic tetramers (totally absent in the ice structure); and iv) the interstitial "defects" formed with increasing pressure, probably arranged in cubic water octamers and composed of two pairs of noncyclic and cyclic tetramer fragments. The latter structures include, essentially, bent hydrogen bonds stabilized by resonance effects.