Determination of malachite green and leucomalachite green in a variety of aquacultured products by liquid chromatography with tandem mass spectrometry detection

A liquid chromatography/tandem mass spectrometry (LC/MS/MS) method was developed for determining the residues of malachite green (MG) and leucomalachite green (LMG) in a number of aquatic species. MG and its metabolite were extracted from homogenized tissues with a perchloric acid-acetonitrile solution; the extract was centrifuged; and an aliquot was taken, concentrated, and passed through a chemically bonded octadecyl C18 solid-phase extraction column. The compounds of interest were eluted with acetonitrile, and the eluate was evaporated to dryness. The residue was dissolved in acetonitrile and diluted with water in preparation for analysis by LC/MS/MS. MG and its metabolite were determined by reversed-phase LC using a Luna C18 column with an ammonium hydroxide-formic acid buffer in acetonitrile gradient and MS/MS detection using multiple reaction monitoring. Calibration curves were linear for all analyses between 5 and 500 pg injected for both analytes, with recoveries ranging from 81% for LMG to 98% for MG in salmon spiked at the 1 ng/g level. Detection limits of 0.1 ng/g for both MG and LMG were easily obtainable using the recommended method. The operational errors, interferences, and recoveries for spiked samples compared favorably with those obtained by established methodology. The recommended method is simple, rapid, and specific for monitoring residues of MG and LMG in a number of aquatic species.     

Use of molecular dynamics in the design and structure determination of a photoinducible beta-hairpin

The study presented here consists of three parts. In the first, the ability of a set of differently substituted diazobenzene-based linkers to act as photoswitchable beta-turn building blocks was assessed. A 12-residue peptide known to form beta-hairpins was taken as the basis for the modeling process. The central (beta-turn) residue pair was successively replaced by six symmetrically ((o,o), (m,m), or (p,p)) substituted (aminomethyl/carboxymethyl or aminoethyl/carboxyethyl) diazobenzene derivatives leading to a set of peptides with a photoswitchable backbone conformation. The folding behavior of each peptide was then investigated by performing molecular dynamics simulations in water (4 ns) and in methanol (10 ns) at room temperature. The simulations suggest that (o,o)- and (m,m)-substituted linkers with a single methylene spacer are significantly better suited to act as photoswitchable beta-turn building blocks than the other linkers examined in this study. The peptide containing the (m,m)-substituted linker was synthesized and characterized by NMR in its cis configuration. In the second part of this study, the structure of this peptide was refined using explicit-solvent simulations and NOE distance restraints, employing a variety of refinement protocols (instantaneous and time-averaged restraining as well as unrestrained simulations). We show that for this type of systems, even short simulations provide a significant improvement in our understanding of their structure if physically meaningful force fields are employed. In the third part, unrestrained explicit-solvent simulations starting from either the NMR model structure (75 ns) or a fully extended structure (25 ns) are shown to converge to a stable beta-hairpin. The resulting ensemble is in good agreement with experimental data, indicating successful structure prediction of the investigated hairpin by classical explicit-solvent molecular dynamics simulations.     

Mechanistic studies on the binding of nitric oxide to a synthetic heme-thiolate complex relevant to cytochrome p450

The synthetic heme-thiolate complex (SR) in methanol binds nitric oxide (k(on) = (2.7 +/- 0.2) x10(6) M(-)(1) s(-)(1) at 25 degrees C) to form SR(NO). The binding of NO to the SR complex in a noncoordinating solvent, such as toluene, was found to be almost 3 orders of magnitude faster than that in methanol. The activation parameters DeltaH(), DeltaS(), and DeltaV() for the formation of SR(NO) in methanol are consistent with the operation of a limiting dissociative mechanism, dominated by dissociation of methanol in SR(MeOH). In the presence of an excess of NO, the formation of SR(NO) is followed by subsequent slower reactions. The substantially negative activation entropy and activation volume values found for the second observed reaction step support an associative mechanism which involves attack of a second NO molecule on the thiolate ligand in the initially formed SR(NO) complex. The following slower reactions are strongly accelerated by a large excess of NO or by the presence of NO(2)(-) in the SR/NO reaction mixture. They can be accounted for in terms of dynamic equilibria between higher nitrogen oxides (NO(x)()) and reactive SR species, which lead to the formation of a nitrosyl-nitrite complex of SR(Fe(II)) as the final product. This finding is clearly supported by laser flash photolysis studies on the SR/NO reaction mixture, which do not reveal simple NO photolabilization from SR(Fe(III))(NO), but rather involve the generation of at least three photoinduced intermediates decaying with different rate constants to the starting material. The species formed along the proposed reaction pathways were characterized by FTIR and EPR spectroscopy. The results are discussed in terms of their relevance for the biological function of cytochrome P450 enzymes and in context of results for the reaction of NO with imidazole- and thiolate-ligated iron(III) hemoproteins.     

Chiral bidentate aminophosphine ligands: synthesis, coordination chemistry and asymmetric catalysis

Chiral aminophosphines Ph2PN(R)(CH2)nN(R)PPh2 1-4 [n= 2, R = CH(CH3)(Ph) 1; n= 3, R = CH(CH2CH3)(Ph) 2, n= 2, R = CH(CH3)(1-naphthyl) 3; n= 2, R = CH(CH3)(C6H11) 4] were synthesized by the reaction of ClPPh2 with the appropriate easily accessible enantiopure amine building blocks. For compounds 1 and 2, the corresponding selenides 5 and 6 were prepared to determine the electronic character of the phosphine moieties. By reaction of 1 with either PdCl2(cod) or PdCl(CH3)(cod) the cis-complexes 7 and 8 were obtained. The molecular structure for complex 7, cis-[PdCl2(1)], was determined by X-ray crystallography. Reaction of PtCl2(cod) with 1 or 2 yielded the corresponding monomeric cis-isomers 9 and 10. The rhodium derivative [RhCl(CO)(1)] (11) was obtained as a mixture of cis and trans-isomers. Preliminary results in the rhodium catalyzed hydroformylation of styrene and vinyl acetate, with ee's up to 51% and high regioselectivities, showed the potential of these chiral aminophosphines for homogeneous catalysis.     

Spectroscopy and quantum chemical modeling reveal a predominant contribution of excitonic interactions to the bathochromic shift in alpha-crustacyanin, the blue carotenoprotein in the carapace of the lobster Homarus gammarus

To resolve the molecular basis of the coloration mechanism of alpha-crustacyanin, we used (13)C-labeled astaxanthins as chromophores for solid-state (13)C NMR and resonance Raman spectroscopy of [6,6',7,7']-(13)C(4) alpha-crustacyanin and [8,8',9,9',10,10',11,11',20,20']-(13)C(10) alpha-crustacyanin. We complement the experimental data with time-dependent density functional theory calculations on several models based on the structural information available for beta-crustacyanin. The data rule out major changes and strong polarization effects in the ground-state electron density of astaxanthin upon binding to the protein. Conformational changes in the chromophore and hydrogen-bond interactions between the astaxanthin and the protein can account only for about one-third of the total bathochromic shift in alpha-crustacyanin. The exciton coupling due to the proximity of two astaxanthin chromophores is found to be large, suggesting that aggregation effects in the protein represent the primary source of the color change.     

Kinetic and thermodynamic studies on ligand substitution reactions and base-on/base-off equilibria of cyanoimidazolylcobamide, a vitamin B12 analog with an imidazole axial nucleoside

Ligand substitution reactions of the vitamin B12 analog cyanoimidazolylcobamide, CN(Im)Cbl, with cyanide were studied. Cyanide substitutes imidazole (Im) in the alpha-position more slowly than it substitutes dimethylbenzimidazole in cyanocobalamin (vitamin B12). The kinetics of the displacement of Im by CN- showed saturation behaviour at high cyanide concentration; the limiting rate constant was found to be 0.0264 s(-1) at 25 degrees C and is characterized by the activation parameters: DeltaH(not =) = 111 +/- 2 kJ mol(-1), DeltaS(not =) = +97 +/- 6 J K(-1) mol(-1), and DeltaV(not =) = +9.3 +/- 0.3 cm3 mol(-1). These parameters are interpreted in terms of an I(d) mechanism. The equilibrium constant for the reaction of CN(Im)Cbl with CN- was found to be 861 +/- 75 M(-1), which is significantly less than that obtained for the reaction of cyanocobalamin with CN- (viz. 10(4) M(-1)). pKbase-off for the base-on/base-off equilibrium was determined spectrophotometrically and found to be 0.99 +/- 0.05, which is about 0.9 pH units higher than that obtained previously in the case of cyanocobalamin. In addition, the kinetics of the base-on/base-off reaction was studied using a pH-jump technique and the data obtained revealed evidence for an acid catalyzed reaction path. The results obtained in this study are discussed in reference to those reported previously for cyanocobalamin.     

Design of a calcium-binding protein with desired structure in a cell adhesion molecule

Ca2+, "a signal of life and death", controls numerous cellular processes through interactions with proteins. An effective approach to understanding the role of Ca2+ is the design of a Ca2+-binding protein with predicted structural and functional properties. To design de novo Ca2+-binding sites in proteins is challenging due to the high coordination numbers and the incorporation of charged ligand residues, in addition to Ca2+-induced conformational change. Here, we demonstrate the successful design of a Ca2+-binding site in the non-Ca2+-binding cell adhesion protein CD2. This designed protein, Ca.CD2, exhibits selectivity for Ca2+ versus other di- and monovalent cations. In addition, La3+ (Kd 5.0 microM) and Tb3+ (Kd 6.6 microM) bind to the designed protein somewhat more tightly than does Ca2+ (Kd 1.4 mM). More interestingly, Ca.CD2 retains the native ability to associate with the natural target molecule. The solution structure reveals that Ca.CD2 binds Ca2+ at the intended site with the designed arrangement, which validates our general strategy for designing de novo Ca2+-binding proteins. The structural information also provides a close view of structural determinants that are necessary for a functional protein to accommodate the metal-binding site. This first success in designing Ca2+-binding proteins with desired structural and functional properties opens a new avenue in unveiling key determinants to Ca2+ binding, the mechanism of Ca2+ signaling, and Ca2+-dependent cell adhesion, while avoiding the complexities of the global conformational changes and cooperativity in natural Ca2+-binding proteins. It also represents a major achievement toward designing functional proteins controlled by Ca2+ binding.     

Effect of crystal packing on the structures of polymeric metallocenes

The pressure dependencies of the crystal structures of the polymeric metallocenes lithium cyclopentadienide (LiCp) and potassium cyclopentadienide (KCp) have been determined by synchrotron X-ray powder diffraction. The decrease of the volume of LiCp by 34% up to a pressure of p = 12.2 GPa and of KCp by 23% at p = 5.3 GPa as well as the bulk moduli of K = 7.7 GPa for LiCp and 4.9 GPa for KCp indicate a high compressibility for these compounds. The crystal structures of KCp have been determined up to p = 3.9 GPa. An increase of the bend angle is found from 45 degrees at p = 0 GPa up to 51 degrees at p = 3.9 GPa. This variation is completely explained by a model invoking attractive K+ Cp- interaction and repulsive nonbonded carbon-carbon interactions. It is proposed that the bend angle in the polymeric alkali metal metallocenes is the result of the optimization of the crystal packing.