Preparation of superhydrophobic silicon oxide nanowire surfaces

The paper reports on the preparation of superhydrophobic amorphous silicon oxide nanowires (a-SiONWs) on silicon substrates with a contact angle greater than 150 degrees by means of surface roughness and self-assembly. Nanowires with an average mean diameter in the range 20-150 nm and 15-20 microm in length were obtained by the so-called solid-liquid-solid (SLS) technique. The porous nature and the high roughness of the resulting surfaces were confirmed by AFM imaging. The superhydrophobicity resulted from the combined effects of surface roughness and chemical modification with fluorodecyl trichlorosilane.     

Receding contact angle in the situation of complete wetting: Experimental check of a model used for evaporating droplets

This paper provides experimental checks of assumptions needed in a model describing the moving contact line of a wetting droplet evaporating in an inert atmosphere. Special interest is given to the maximum extension of the droplet, when the contact line starts receding. The predicted power law dependence between the values of the radius R₀ and the contact angle Θ₀ at the maximum extension is checked against experiments. We find fairly good agreement with theory for very small droplets. However, discrepancies show up rapidly when the droplet size increases.     

Asymmetric [2,3]-rearrangement of glycine-derived allyl ammonium ylids

The first examples of highly enantioselective [2,3]-sigmatropic rearrangements of acyclic allylic ammonium ylids are reported. Thus, a range of N-{2'-[(N'-allyl-N',N'-dialkyl)ammonium]}acetyl camphor sultams undergo rearrangement at 0 degrees C in DME solution with high diastereofacial control (up to 99:1 dr) to give allylglycines in generally high yield. The power of the method has been demonstrated in a rapid and efficient synthesis of (R)-allyl glycine.     

Interactions between hen egg-white lysozyme, PEG2,000, and PLA50 at the air-water interface

In this paper, we compared the efficiency of polymer films, made of a poly(ethylene glycol) (PEG2,000)/poly(d,l-lactide) (PLA50) mixture, or a PEG2,000-PLA50 copolymer, to prevent adsorption of a model protein, the hen egg-white lysozyme (HEWL), at the air-water interface. This was achieved by analyzing the surface pressure/surface area curves, and the X-ray reflectivity data of the polymer films spread on a Langmuir trough, obtained in absence or in presence of the protein. For both the mixture and the copolymer, the amount of protein adsorbed at the air-water interface decreases when the density of the polymer surface coverage increases. It was shown that even in a condensed state, the polymer film made by the mixture can not totally prevent HEWL molecules to adsorb and penetrate the polymer mixed film, but however, protein molecules would not be directly exposed to the more hydrophobic phase, i.e. the air phase. It was also shown that the configuration adopted by the copolymer at the interface in its condensed state would prevent adsorption of HEWL molecules for several hours; this would be due in particular to the presence of PEG segments in the interfacial film.     

A systematic study of the interactions between chemical partners (metal, ligands, counterions, and support) involved in the design of Al2O3-supported nickel catalysts from diamine-Ni(II) chelates

1.5 Ni wt %/Al2O3 catalysts have been prepared by incipient wetness impregnation using [Ni(diamine)x(H2O)(6-2x)]Y2 precursors (diamine = 1,2-ethanediamine (en) and trans-1,2-cyclohexanediamine (tc); x = 0, 1, and 2; Y = NO3- and Cl-), to avoid the formation, during calcination, of difficult-to-reduce nickel aluminate. N2 was chosen for thermal treatment to help reveal and take advantage of the reactions occurring between Ni2+, ligands, counterions, and support. In the case of [Ni(en)2(H2O)2]Y2 salts used as precursors, in situ UV-vis and DRIFT spectroscopies show that after treatment at 230 degrees C Ni(II) ions are grafted to alumina via two OAl bonds and that the diamine ligands still remain coordinated to grafted nickel ions but in a monodentate way, bridging the cation with the alumina surface. With Y = Cl-, the chloride counterions desorb as hydrogen chloride, and hydrogen released upon decomposition of the en ligands is able to reduce a fraction of nickel ions into metal as evidenced by XPS. In contrast, with Y = NO3-, compounds such as CO or NO are formed during thermal treatment, indicating that nitrate ions burn the en ligands. After thermal treatment at 500 degrees C, a surface phase containing Ni(II) ions forms, characterized by XPS and UV-vis spectroscopy. Temperature-programmed reduction shows that these ions can be quantitatively reduced to the metallic state at 500 degrees C, in contrast with the aluminate obtained when the preparation is carried out from [Ni(H2O)6]2+, which is reduced only partly at 950 degrees C. On the other hand, a total self-reduction of nickel complexes leading to 2-5-nm metal particles is obtained upon thermal treatment via the hydrogen released by a hydrogen-rich ligand such as tc, whatever the Y counterion. An appropriate choice of the ligand and the counterion allows then to obtain selectively Ni(II) ions or a dispersed reduced nickel phase after treatment in N2, as a result of the reactions occurring between the chemical partners present on alumina.     

Chromatographie par complexe de transfert de charge. Application à l'analyse d'hydroliquéfiats du charbon par HPLC

Résumé L'analyse de coupes lourdes (huile de distillation sous vide et huile issue du séparateur à chaud) provenant de l'hydroliquéfaction catalytique du charbon a été réalisée par mise en ouvre de différentes techniques chromatographiques. L'identification des principales structures résulte de l'application de la chromatographie par couplage de transfert de charge en mode HPLC et des spectroscopies UV et de masse.

---

Donotor-acceptor complex chromatography —Application to analysis of coal liquefaction products by HPLC

Summary A Vacuum gas oil and the corresponding residue of a coal liquefaction product were investigated by means of HPLC and MS. Nearly a complete identification was performed by chromatographic, UV-spectroscopic methods and MS.

     

Enhancing <Emphasis Type="SmallCaps">l</Emphasis>-Lysine Production of Beet Molasses by Engineered <Emphasis Type="Italic">Escherichia coli</Emphasis> Using an In Situ Pretreatment Method

Reducing the viscosity of molasses environmentally and selectively removing the harmful ingredients for microbes are the keys to promoting the bioavailability of molasses. A simple and environmental in situ pretreatment method integrating surfactants and alkali was developed to reduce the viscosity of molasses prior to l-lysine production using Escherichia coli ZY0217. Adding activated carbon and modified orange peel based on the in situ pretreatment process effectively removed pigments and excessive zinc in the molasses and also significantly increased the cell growth and l-lysine yield from E. coli ZY0217. The experimental results showed that a mixture of secondary alkane sulfonate, an anionic surfactant, and HodagCB-6, a non-ionic surfactant, effectively reduced the viscosity of the molasses more so than any single surfactant. When the surfactant mixture was added at a concentration of 0.04 g/L to the molasses, the ω value was 0.4, and when ammonia was added at 0.6 %, the lowest viscosity of 705 mPa?·?s was obtained. Further, 91.5 % of the color and 86.68 % of the original levels of zinc were removed using an activated carbon and modified orange peel treatment on the molasses with the lowest viscosity, which further promoted cell growth and l-lysine production. In the fed-batch cultivation process, the l-lysine concentration achieved using a constant-speed feeding strategy was 45.89 g/L, with an l-lysine yield of 27.18 %, whereas the l-lysine yield from untreated molasses was only 10.13 %. The increase in l-lysine yield was related to the reduced viscosity and the detoxification of the molasses. Lastly, the pretreatment was found to significantly enhance the conversion of sugars in the molasses to l-lysine.     

The use of metallocenic esters of n-hydroxysuccinimide for metallohapten synthesis

Different organometallic markers have been described in a new technique for the labelling of many drugs. Thus metallocenic esters of [M = (;CO)₃CrC₆H₅?; (;CO)₃CrC₆H₅?(;CH₂)₃?; η-C₅H₅?FeC₅H₄?; (;CO)₃MnηC₅H₄?; (;CO)₃Mn?ηC₅H₄COCH₂CH₂?; ηC₅H₄(;ηC₅H₅)Co⁺PF^?₆] react with primary or secondary amine drugs [DRUG?NHR] for a psychostimulant drug: amphetamine; tricyclic antidepressants—desipramine and nortriptyline; a vasodilator—histamine; an adrenergic substance—norfenefrine; and for a central stimulant—meth-amphetamine, to give the metallohaptens MCON(;R)—DRUG. All these compounds have been fully characterized by different analytical methods and have potentialities for biological assays. This synthetic route was found better than one presented previously which utilized the metallocenic acid chloride MCOCI as intermediate, and could be proposed as a general synthetic route for labelling biological compounds which possess an amino group.     

Photochemistry of Isothiocoumarin (= 1H-[2]benzothiopyran-1-one)

Irradiation (λ = 350 nm) of 1H-[2]benzothiopyran-1-one ( 2 ) in the solid state affords selectively and in good yield 6aα, 6bα, 12bα, 12cα -tetrahydrocyclobuta[1, 2-c:4, 3-c′]bis([2]benzothiopyran)-5, 8-dione ( 3 ), the head-to-head (HH) cis-cisoid-cis-cyclodimer of 2 , X-Ray analysis of 2 confirms that this reaction proceeds according to the well-established topochemical principles. The same dimer 3 is obtained in low yields on irradiation of 10⁻¹ M solutions of 2 in either MeOH or MeCN, while no conversion at all is observed in benzene. On irradiation of 2 in MeCN in the presence of tetrachloroethene, the [2 + 2] photocycloadduct 4 is formed in good yield, the conversion 2 → 4 being efficiently quenched by naphthalene. In contrast, no reaction is observed -on irradiation of 2 in the presence of 2, 3-dimethylbut-2-ene, neither in polar nor in apolar solvents.