Ring-opening Sn2'' reactions of 7-oxanorbornenes by organolithium reagents. Regio- and stereospecific synthesis of substituted cyclohexenediols

The nucleophilic Sn2' bridge opening of 7-oxabicyclo[2.2.1] hept-5-en-2-ols with organolithium reagents occurs in a regio- and stereospecific fashion to produce 6-substituted-cyclohex-4-en-1,3-diols, regardless of the stereochemistry at C-2. A free alcohol functionality is necessary to attain complete regiocontrol of the process. The methodology is utilized to prepare an optically pure cyclohexene derivative, (+)-(1S,3S,6R)-6-n-butyl-3-methyl-cyclohex-4-en-1,3-diol (5b), as a model system.     

The influence of microhydration on the ionization energy thresholds of uracil and thymine

In the present study the ionization energy thresholds (IET's) of uracil and thymine have been calculated (with the B3LYP, PMP2, and P3 levels of theory using the standard 6-31++G(d,p) basis set) with one to three water molecules placed in the first hydration shell. Then (B3LYP) polarizable continuum model (PCM) calculations were performed with one to three waters of the hydration shell included. Calculations show there is a distinct effect of microhydration on uracil and thymine. For uracil, one added water results in a decrease in the IET of about 0.15 eV. The second and third water molecules cause a further decrease by about 0.07 eV each. For thymine, the first water molecule is seen to decrease the IET by about 0.1 eV, while the second and third water molecules cause a further decrease of less than 0.1 eV each. The changes in IET calculated here for thymine with one to three waters of hydration are smaller than the experimental values determined by Kim et al. (Kim, S. K.; Lee, W.; Herschbach, D. R. J. Phys. Chem. 1996, 100, 7933). Preliminary results presented here indicate that the experimental results may involve keto-enol tautomers of thymine. The results of placing the microhydrated structures of uracil and thymine in a PCM cavity was seen to make very little difference in the IET when compared to the IET of ordinary uracil or thymine in a PCM cavity. The implications are that accurate calculations of the IET's of uracil and thymine can be obtained by simply considering long-range solvation effects.     

Comparison of different derivatization approaches for mercury speciation in biological tissues by gas chromatography/inductively coupled plasma mass spectrometry

A novel interface design for coupling gas chromatography and inductively coupled plasma mass spectrometry (GC/ICP-MS) was used to perform mercury speciation in biological tissues. Three derivatization approaches were optimized and compared for this purpose: anhydrous butylation using a Grignard reagent, aqueous ethylation by means of NaEt(4)B and aqueous propylation with NaPr(4)B. The last reagent was synthesized in the laboratory as it is not commercially available. Detection limits obtained by GC/ICP-MS ranged between 100 and 200 fg (as absolute mass) for methylmercury and between 500 and 600 fg for inorganic mercury using a 1 microl injection. Quantification of methyl- and inorganic mercury was carried out by resorting to aqueous calibration, using ethylmercury as internal standard for both propylation and butylation derivatization techniques. For ethylation procedures, a methylpropylmercury solution was used as internal standard. The absence of transmethylation during sample preparation was checked using a 97% enriched (202)Hg inorganic standard. The accuracy of the three derivatization approaches was evaluated by the analysis of the certified reference material DOLT-2 (dogfish liver) from the National Research Council of Canada and certified for methylmercury, with satisfactory results.     

A spectrometric,separation and voltammetric study of the complexation reactions of bromazepam with iron(ii),copper(ii) and cobalt(ii)

Bromazepam, in the form of a cationic iron(II) chelate, can be determined spectrophotometrically at 588 nm with a limit of detection of ca. 10^-6 M. When this chelate is ion-paired with perchlorate, it can be extracted into organic solvents such as 1,2-dichloroethane and 4-methyl-2-pentanone, and determined by atomic absorption spectrometry with a limit of detection of 1.5 × 10^-5 M bromazepam at the iron resonance 248.3-nm line. Ion-pairs involving the Fe(II), Cu(II) and Co(II) chelates and perchlorate can be separated by h.p.l.c. using a C₁₈ reverse-phase column and a mobile phase of 4:1 water—methanol, with a u.v. detector at 242 nm. This approach allowed for the determination of iron(II) ions in aqueous solution with a limit of detection of 10^-8 M. The h.p.l.c. method could also be used to quantify bromazepam spiked in plasma in the concentration range 1–10 μg ml^-1, following extraction of bromazepam from plasma and subsequent formation of the iron(II) ion-pair. Copper(II) forms a labile chelate with bromazepam in pH 4.8 acetate buffer which, when subjected to differential pulse voltammetry at the hanging mercury drop electrode, gives rise to a catalytic phenomenon which can be utilised for the determination of bromazepam in the concentration range 10^-5–10^-9 M.     

Determination of terazosin by cloud point extraction-fluorimetric combined methodology

A new sensitive and selective preconcentration-fluorimetric method for determination of terazosin based on its native fluorescence was developed. The analyte, initially present in aqueous matrix, was treated with an extractive non-ionic surfactant solution and separated by the clouding phenomenon. The optimum analytical conditions for terazosin assay were established. Under these conditions, linear calibration curves were obtained over the range of 1 × 10⁻⁵ to 7.0 μg mL⁻¹ with detection and quantification limits of 1.11 × 10⁻⁵ and 3.7 × 10⁻⁵ μg mL⁻¹, respectively. Additionally, the binding constant (K_B) for the terazosin-PONPE 7.5 system was determined given a value of 1028 L mol⁻¹. The developed coupled methodology, which thoroughly satisfies the typical requirements for pharmaceutical control processes, was proved to be appropriate for monitoring terazosin in actual pharmaceutical formulations and biological fluid sample. The results were validated by recovery test and by comparison with other reported methods, being highly satisfactory.     

Determination of triclosan in foodstuffs

A reverse-phase high-performance liquid chromatographic (RP-HPLC) method coupled with an ultraviolet detector was developed to determine triclosan which had migrated into foodstuffs from packaging materials. The method includes extraction with hexane, followed by evaporation to dryness and residue re-dissolution in ACN 90%. Chromatographic separation was performed with a Kromasil 100 C18 column (15 cm x 0.4 cm ID, 5 microm particle size) at 30 degrees C and using ACN and water as mobile phases. Regarding recoveries, good results (higher than 83% and lower than 112%) were obtained for the three representative food matrixes selected (orange juice, chicken breast meat, and Gouda cheese).     

Structure and Dynamics of Methyl-substituted Beryllocene: [Be(C5Me5)2]

In this paper we study theoretically the molecular structure of [Be(C₅Me₅)₂], with special interest in similarities and differences found in the computed geometric parameters, depending on the treatment of the electron correlation used. Given the low energy differences found between the different configurations studied (less than 4 kcal mol⁻¹), and the high fluxionality found in experimental studies for this compound, we analyzed the dynamics of the system by means of first principles molecular dynamics calculations. A complex dynamics is found and analyzed in terms of two molecular rearrangement processes: 1,2-sigmatropic intraring rearrangement and a ring inversion mechanism that interchanges the roles (with regard to their coordination to the central Be atom) of the two rings.Dedicated to Dr. Jeal Paul Malrieu on occasion of his 65th birthday.     

Study of the influence of isomerism on the curing properties of the epoxy system DGEBA (n=0)/1,2 DCH by DEA and MDSC

Summary Modulated differential scanning calorimetry (MDSC) and dielectric analysis (DEA) have been used to characterize the cure process of the system diglycidyl ether of bisphenol A (DGEBA(n=0)/1,2 diaminocyclohexane (1,2 DCH). The trans isomer and a mixture cis/trans(30-70% respectively) of 1,2 DCH were used to find their different behaviour. The study allowed to check the influence of the cisisomer on the thermoset curing process. Gelation times were obtained through the equation proposed by Johari and vitrification times from the point of inflection of the complex calorific capacity modulus.     

Study of the morphology of poly(methyl methacrylate) as polymerized by the redox system Ce(IV)–isopropyl alcohol

Methyl methacrylate has been polymerized in aqueous nitric acid at 30°C, with the redox system ceric ammonium nitrate–isopropyl alcohol as initiator. The gravimetric method has been used to follow the reaction. After a short induction period polymerization started, and conversion attained a maximum value with extent of reaction, whereas the ceric ion is exhausted. The size, distribution, and number of PMMA particles formed were measured by scanning electron microscope. From the electron micrographs it was found that the particles are formed over a short period, and that the particle size distribution seems to be determined by flocculation and coagulation of the particles, because these are not stabilized. Average-molecular weight was found to increase at high conversions and the molecular weight distribution became broader as particle size increased. Particle size increased with conversion, whereas the number of particles remained constant.     

Utilization of flash chromatography for the fractionation of coal derived liquids

Summary The suitability of flash chromatography for the fractionation of coal liquids in compound classes has been studied. TLC data obtained from standards were used for establishing the sequence, composition and volume of eluents in order to collect the main components of coal liquids in six fractions of increasing polarity. The method was tested by the fractionation of a SCG coal extract and separations were evaluated by TLC, SEC, and IR and NMR spectroscopy.