双波长薄层紫外可见光谱电化学测定多巴胺

多巴胺 (DA)和抗坏血酸 (AA)的吸收光谱在 2 0 0～ 30 0nm内重叠严重 ,但在电化学氧化状态下 ,DA的氧化产物在 2 10 ,30 0和 4 80nm有强吸收峰 ,AA的氧化产物在 2 0 0～ 4 0 0nm范围内吸收较弱且呈光滑平缓的斜坡。在此基础上 ,利用自行设计的长光程薄层光谱电化学池建立了一种双波长光谱电化学法测定DA。测定条件为 pH 6 .2的磷酸盐缓冲液 (PBS) ,0 .6V (vs.Ag/AgCl)电极电位 ,双波长 318/ 2 93nm ,线性范围为 4 .0× 10 - 6 ～ 2 .0× 10 - 4mol·L- 1,检出限为 2 .0×10 - 6 mol·L- 1。对 6 .2 0× 10 - 5mol·L- 1DA进行 11次平行测定 ,平均相对偏差为 2 .6 %。与文献报道的吸光光度法相比 ,该法具有较高的灵敏度和选择性 ,较为有效地消除了AA的干扰 ,回收率在 91.8%～ 10 0 .8%之间 ,结果满意     

高效液相色谱和热重分析在树形聚酰胺胺合成中的应用

优化了聚酰胺胺树形分子合成工艺条件，采用HPLC和热重分析（TG）相结合的方法对所合成的树形聚酰胺胺进行分析与表征；HPLC的分析表明，在各不同代的目标化合物中，均有反应物单体存在，在高代产物中除了含有少量反应物外，还有少量的低代数分子；TG分析表明，产物中小分子反应物占的比例很少，一般为2％－3％左右，如果将减压蒸馏后的产物重新进行真空干燥，对半代树形大分子，能进一步有效除去小分子反应物，而对于整数代树形大分子，则效果并不理想。     

低温低内应力化学镀镍工艺的研究

化学镀广泛应用于非金属的电镀、电铸前的施加导电层。化学镀沉积层质量与其在零件上的附着力有着密切的关系 ,重视对化学镀沉积层内应力的研究 ,开发一个低温、低内应力的化学镀镍工艺 ,对于化学镀沉积层的推广应用有着十分重要的意义。本文采用正交实验方法对低温、低内应力化学镀镍工艺进行了系统研究 ,开发出了一个低温、低内应力的化学镀镍工艺。在实验过程中发现沉积层内应力同其在零件上的结合力具有密切关系并对其进行了初步探讨。1　实验方法1 1　正交实验根据探索性实验结果分析 ,影响化学镀镍层内应力σ和沉积层速率ｒ的主要因…     

GA-KBrO3-H2SO4体系化学振荡的研究

研究了GA(没食子酸)-KBrO_3-H_2SO_4体系的诱导期τ、振荡周期T_2与反应物起始浓度的依赖关系, 302 K时的经验式为τ=22.8 c~(-2.23)_(H_2SO_4) c~(-2.17)_(KBrO_3) c~(0.795)_(GA) (mol.dm~(-3))~(4.25)·sT_2=0.84 c~(-2.28)_(H_2SO-4)c~(-1.97)_(KBrO_3) exp{(0.000147(mol.dm~(-3))~2/c~2_(GA)}(mol.dm~(-3))~(4.25)·sτ及T_2都随~CGA的增加而增长, 这与B-Z反应中关于有机物的结论不同。用循环伏安法研究该体系的结果表明, GA在诱导期结束时就基本上都被氧化为中间物, GA并不象前人所认为的是维持振荡的物种, 实际参与振荡的是由GA生成的物质。本文还研究了Fe(Phen)_3~(2+)对GA-KBrO_3-H_2SO_4体系振荡的影响, 发现Br~-振荡行为随Fe(Phen)_3~(2+)的浓度而变。低~CFe(phen)_3~(2+)时,Br~-的振荡行为与GA-KBrO_3-H_2SO_4体系的基本相似, 其特征是每个振荡周期内, Br~-振荡脉冲发生前是逐渐积累的。随着~CFe(phen)_3~(2+)的增大, Br~-出现另一特征的振荡行为, 在每个振荡周期内, Br~-振荡脉冲发生前是逐渐减小。我们认为, GA-KBrO_3-H_2SO_4-Fe(Phen)_3~(2+)体系的振荡不能单一地用OKN机理加以解释, 它可能是两套振荡机理耦合的振荡。     

Serum pharmacochemistry combined with multiple data processing approach to screen the bioactive components and their metabolites in Mutan Cortex by ultra‐performance liquid chromatography tandem mass spectrometry

Root cortex of Paeonia suffruticosa Andrews (Paeoniaceae), known as Moutan Cortex (MC), is known to have anti‐allergic and anti‐inflammatory properties. However, the constituents absorbed into blood after oral administration of MC remain unknown. A sensitive and rapid method by ultra‐high‐pressure liquid chromatography–electrospray ionization–quadrupole‐time‐of‐flight mass spectrometry (UPLC‐ESI‐Q‐TOF‐MS) technology and the MetaboLynx^TM software combined with multiple data processing approach (Mdpa) was established to investigate the absorbed constituents in rats after oral administration of MC, providing unique high‐throughput capabilities for drug metabolism study. A hyphenated electrospray ionization and quadrupole‐time‐of‐flight analyzer was used for the determination of accurate mass of the fragment ion in negative mode, with excellent MS mass accuracy and enhanced data acquisition. This rapid automated analysis method was successfully applied for screening and identification of the constituents absorbed and metabolized studies of MC after oral administration to rats. A total of 46 peaks were obtained from MC, 41 of which were tentatively characterized. In the VIP‐plot of orthogonal partial least‐squares discriminant analysis, 23 interesting ions in serum samples were extracted, and 16 parent components and seven metabolites were detected in vivo. The integrative serum pharmacochemistry technique, UPLC‐ESI‐Q‐TOF‐MS, and Mdpa method were successfully applied for rapid discovery of multiple components from MC. Copyright © 2013 John Wiley & Sons, Ltd.     

Multifractal analysis for Cu/Ti bilayer thin films

Two bilayer thin films with different stacking sequences, Cu/Ti/Si and Ti/Cu/Si, were deposited by DC magnetron sputtering technique. X‐ray diffraction technique was used to measure the crystallization structures, and scanning electron microscopy and atomic force microscopy were used to measured surface morphology. The multifractal spectra f(α)‐α was used to characterize the surface morphology. The result of |q|_max ≤ 53 is obtained by multifractal analysis. The shape of the multifractal spectra f(α) ? α is hook‐like for Cu/Ti/Si and bell jar‐like for Ti/Cu/Si. The spectrum width Δα = α_max ? α_min and Δf(=f(α_min) ? f(α_max)) of the multifractal spectra is able to quantitatively analyze the growth and surface roughness of the Cu/Ti bilayer thin films. The surface of Ti/Cu/Si thin film is more uniform and smoother than the film of Cu/Ti/Si. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and preliminary biological evaluation of 99mTc(CO)3-labeled pegylated 2-nitroimidazoles

This work reports the synthesis, radiolabeling and preliminary biodistribution results in tumor-bearing mice of ^99mTc(CO)₃-labeled pegylated (PEG) 2-nitroimidazoles for tumor hypoxia imaging. The novel 2-nitroimidazole derivatives were successfully synthesized by conjugation of tridendate chelators to 2-nitroimidazole via PEG₃ linker. Radiolabeling was performed in high yield with [^99mTc(CO)₃]⁺ core to get cationic [^99mTc(CO)₃(BPA-PEG₃-NIM)]⁺, neutral [^99mTc(CO)₃(AOPA-PEG₃-NIM)] and anionic [^99mTc(CO)₃(IDA-PEG₃-NIM)]^? respectively, all of which were hydrophilic and stable at room temperature. Biodistribution studies in tumor-bearing mice showed that ^99mTc(CO)₃-labeled pegylated 2-nitroimidazoles accumulated in the tumor with low uptake. ^99mTc-chelate and charge had significant impact on partition coefficient, radiotracer tumor uptake and pharmacokinetic properties. The results indicate the need for synthetic modification of the parent 2-nitroimidazole derivatives and the ^99mTc-chelate with a view to improve the tumor targeting efficacy and in vivo kinetic profiles.     

Fitting formula for the injection volume of a gas chromatograph for radio‐xenon sampling in the lower troposphere

GC is usually used for xenon concentration and radon removal in the International Monitoring System of the Comprehensive Nuclear‐Test‐Ban Treaty. In a gas chromatograph, the injection volume is defined to calculate the column capacity. In this paper, the injection volume was investigated and a fitting formula for the injection volume was derived and discussed subsequently. As a consequence, the xenon injection volume exponentially decreased with the column temperature increased, but exponentially increased as the flow rate increased.