When Gold Cations Meet Polyoxometalates

Merging gold(I) cations with polyoxometalate anions results in various interclusters and complexes. Herein, the synthesis of these newly emerging gold(I)/polyoxometalate materials is reviewed. The applications of these promising hybrids in organic catalysis are also summarized and evaluated in terms of the advantages and limitations of the catalysts including efficiency, synergistic effects and recyclability.     

Cover Feature: Mechanism of Oxidative Activation of Fluorinated Aromatic Compounds by N-Bridged Diiron-Phthalocyanine: What Determines the Reactivity? (Chem. Eur. J. 63/2019)

The biodegradation of compounds with C−F bonds is challenging due to the fact that these bonds are stronger than the C−H bond in methane. In this work, results on the unprecedented reactivity of a biomimetic model complex that contains an N-bridged diiron-phthalocyanine are presented; this model complex is shown to react with perfluorinated arenes under addition of H₂O₂ effectively. To get mechanistic insight into this unusual reactivity, detailed density functional theory calculations on the mechanism of C₆F₆ activation by an iron(IV)-oxo active species of the N-bridged diiron phthalocyanine system were performed. Our studies show that the reaction proceeds through a rate-determining electrophilic C−O addition reaction followed by a 1,2-fluoride shift to give the ketone product, which can further rearrange to the phenol. A thermochemical analysis shows that the weakest C−F bond is the aliphatic C−F bond in the ketone intermediate. The oxidative defluorination of perfluoroaromatics is demonstrated to proceed through a completely different mechanism compared to that of aromatic C−H hydroxylation by iron(IV)-oxo intermediates such as cytochrome P450 Compound I.     

Isolation of Bisphenol A-Tolerating/degrading Shewanella haliotis Strain MH137742 from an Estuarine Environment

Applied Biochemistry and Biotechnology - The human exposure to bisphenol A (BPA) occurs frequently. Once, this compound was one of the highest volume chemicals produced worldwide and used as a...     

The use of microemulsion for determination of sodium and potassium in biodiesel by flame atomic absorption spectrometry

A new method for F AAS determination of sodium and potassium in biodiesel using water-in-oil microemulsion as sample preparation is proposed. The method was investigated for biodiesel produced from different sources, as soybean, castor and sunflower oil and animal fat and was also applied for vegetable oils. The optimized condition for microemulsion formation was 57.6% (w/w) of n-pentanol, 20% (w/w) of biodiesel or vegetable oil, 14.4% (w/w) of Triton X-100 and 8% (w/w) of water (aqueous standard of KCl or NaCl in/or diluted HNO₃). The optimized instrumental parameters were: aspiration rate of 2 mL min⁻¹ and the flame composition of 0.131 of C₂H₂/air ratio. For comparison purpose, the determination of sodium and potassium were also carried out according to European norms (EN 14108 and EN 14109, respectively). These norms are applied for determination of sodium and potassium in fatty acid methylic ester samples and consist in the sample dilution using organic solvent and determination by F AAS. The stability of microemulsified aqueous standards and samples was investigated and it was found to be stable for at least 3 days while the organic standard diluted with xylene showed a decrease around of 15% in the analytical signal in 1 h. The limits of detection were 0.1 μg g⁻¹ and 0.06 μg g⁻¹ and the obtained characteristic concentrations were 25 μg L⁻¹ and 28 μg L⁻¹ for sodium and potassium, respectively. The proposed method presented two times better limits of detection and better precision (0.4–1.0%) when compared with the dilution technique (1.5–4.5%). The accuracy of the method was evaluated through recovery tests and comparison with the results obtained by dilution technique. The recoveries ranged from 95% to 115% for biodiesel and 90% to 115% for vegetable oil samples. Comparison between the results obtained for biodiesel by both methods showed no significant differences at the 95% confidence level according to a Student's t-test. This study shows that the proposed method based on microemulsion as sample preparation can be applied as an efficient alternative for sodium and potassium determination in biodiesel samples.     

A rapid method for detection of catalase-positive and catalase-negative bacteria based on monitoring of hydrogen peroxide evolution at a composite peroxidase biosensor

The rapid detection of catalase-positive and catalase-negative bacteria in complex culture media has been accomplished by monitoring of hydrogen peroxide consumption or generation with a graphite-Teflon-peroxidase-ferrocene composite electrode. Escherichia coli and Streptococcus pneumoniae have been used as model catalase-positive and catalase-negative bacteria, respectively. Hydrogen peroxide evolution was amperometrically measured at 0.00 V. Experimental conditions, including the working solution composition, the incubation time and the hydrogen peroxide concentration, were optimized. The reusability of the biosensor was improved by placing a nylon membrane on the bioelectrode surface to prevent fouling caused by the bacterial medium. The developed methodology allowed the detection of E. coli and S. pneumoniae at concentration levels of approximately 2x10(6) and 2x10(5) cfu/mL, in assays taking 10 and 15 min, respectively, without any pre-concentration step or pre-enrichment procedure.     

An environmental friendly method for the automatic determination of hypochlorite in commercial products using multisyringe flow injection analysis

A multisyringe flow injection analysis system was used for the determination of hypochlorite in cleaning agents, by measurement of the native absorbance of hypochlorite at 292 nm. The methodology was based on the selective decomposition of hypochlorite by a cobalt oxide catalyst giving chloride and oxygen. The difference of the absorbance of the sample before and after its pass through a cobalt oxide column was selected as analytical signal. As no further reagent was required this work can be considered as a contribution to environmental friendly analytical chemistry. The entire analytical procedure, including in-line sample dilution in three steps was automated by first, dilution in a stirred miniature vessel, second by dispersion and third by in-line addition of water using multisyringe flow injection technique. The dynamic concentration range was 0.04-0.78 g L⁻¹ (relative standard deviation lower than 3%), where the extension of the hypochlorite decomposition was of 90 ± 4%. The proposed method was successfully applied to the analysis of commercial cleaning products. The accuracy of the method was established by iodometric titration.     

Antioxidant activity of (+)-bergenin: a phytoconstituent isolated from the bark of Sacoglottis uchi Huber (Humireaceae)

(+)-Bergenin (1) was isolated from Sacoglottis uchi, a species of vegetable found in the Amazon region and popularly used for the treatment of several hepatic problems. The structure of 1 was fully characterized using IR, GC-MS and NMR (1D and 2D) analyses. This phytoconstituent has been used as an oriental folk medicine for the treatment of many diseases and shows antihepatotoxic properties. Tests with beta-carotene, DPPH and a heterogeneous Fenton system were carried out, confirming the antioxidant activity of 1. Theoretical calculations were performed to investigate the formation of the radical derivatives of 1 using *H, *OH, *CH(3), and *CCl(3) as initiator radicals. DFT thermodynamic calculations showed that the methoxyl group (O-6-CH(3)) is the most favorable site for radical attack. Frontier molecular orbital analysis showed that nucleophilic radical attack is favored on the aromatic ring of 1 where the LUMO is localized, with antibonding character with respect to the O-6-CH(3) bond. The possibilities of attack at other sites on 1 were investigated in detail in order to understand the regiospecificity of this reaction.     

Synthesis and 1H NMR studies of paramagnetic nickel(II) complexes containing bis(pyrazolyl)methane ligands with dendritic substituents

The substituted bis(pyrazolyl)methane ligands RCH(3,5-Me2pz)2(R=SiMe3, CH2Ph, G1, G2, and G3; Gn=Fréchet-type dendritic wedges of generation n) have been prepared starting from H2C(3,5-Me2pz)2. Reaction of these didentate ligands with [NiBr2(DME)] is a straightforward procedure that allows the synthesis of the nickel(II) complexes [NiBr2{RCH(3,5-Me2pz)2}]. The molecular structure of compound (R=CH2Ph) has been determined by X-ray diffraction studies. The nickel centre coordinates two bromine and two nitrogen atoms in a tetrahedral environment, and the metallacycle Ni(NN)2C adopts a boat conformation with the benzyl group in an axial position. 1H NMR studies have been carried out to characterize these paramagnetic nickel compounds in solution. Valuable information about the disposition of the ligands and dendritic wedges in solution has been obtained thanks to the influence of the paramagnetic centre on the proton resonances.     

Comprehensive gas chromatography of high-boiling halogenated compounds

Summary Comprehensive gas chromatography is an excellent technique for separating complex mixtures. If, however high-boiling compounds such as polychlorinated biphenyls have to be analysed, proper adjustiment of the temperature of the modulator turns out to be very important in maintaining the performance of the system. It is shown that miniaturisation of the column-to-modulator coupling, adequate selection of the modulating conditions and, for halogenated compound mixtures, the use of a micro electron-capture detector, can solve experimental problems previously encountered with high boilers.