Chemoenzymatic synthesis, structural study and biological activity of novel indolizidine and quinolizidine iminocyclitols

The synthesis, conformational study and inhibitory properties of diverse indolizidine and quinolizidine iminocyclitols are described. The compounds were chemo-enzymatically synthesized by two-step aldol addition and reductive amination reactions. The aldol addition of dihydroxyacetone phosphate (DHAP) to N-Cbz-piperidine carbaldehyde derivatives catalyzed by L-rhamnulose 1-phosphate aldolase from Escherichia coli provides the key intermediates. The stereochemical outcome of both aldol addition and reductive amination depended upon the structure of the starting material and intermediates. The combination of both reactions furnished five indolizidine and six quinolizidine type iminocyclitols. A structural analysis by NMR and in silico density functional theory (DFT) calculations allowed us to determine the population of stereoisomers with the trans or cis ring fusion, as a consequence of the inversion of configuration of the bridgehead nitrogen. The trans fusion was by far the most stable, but for certain stereochemical configurations of the 3-hydroxymethyl and hydroxyl substituents both trans and cis fusion stereoisomers coexisted in different proportions. Some of the polyhydroxylated indolizidines and quinolizidines were shown to be moderate to good inhibitors against α-L-rhamnosidase from Penicillium decumbens. Indolizidines were found to be moderate inhibitors of the rat intestinal sucrase and of the exoglucosidase amyloglucosidase from Aspergillus niger. In spite of their activity against α-L-rhamnosidase, all the compounds were ineffective to inhibit the growth of the Mycobacterium tuberculosis, the causative agent of tuberculosis.     

A rhenium tris-carbonyl derivative as a single core multimodal probe for imaging (SCoMPI) combining infrared and luminescent properties

A rhenium tris-carbonyl derivative has been designed to couple infrared and luminescent detection in cells. Both spectroscopies are consistent with one another; they point out the reliability of the present SCoMPI (for Single Core Multimodal Probe for Imaging) for bimodal imaging and unambiguously indicate a localization at the Golgi apparatus in MDA-MB-231 breast cancer cells.     

Synthesis of colloidal nanoscaled copper-indium-gallium-selenide (CIGS) particles for photovoltaic applications

In this work, Cu(In,Ga)Se(2) (CIGS) nanoparticles were synthesized using a wet chemical method. The method is based on a non-vacuum thermal process that does not use selenization. The effects of temperature, source materials, and growth conditions on the phase and particle size were investigated. X-ray diffraction results confirm the formation of a tetragonal CIGS structure as the main phase with the purity more than 99% obtained by energy-dispersive X-ray spectroscopy (EDX). The morphology and size of the samples were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Using these methods, 20-80nm particles were obtained. Through measurements of the absorption spectra of CIGS nanoparticles, the band gap of the synthesized material was determined to be about 1.44eV, which corresponds to an acceptable wavelength region for absorber layers in solar cells.     

Mononuclear and dinuclear manganese compounds stabilized by supramolecular interactions

New manganese compounds [Mn(HphpzMe)(2)(H(2)phpzMe)(HCO(2))] (1), [Mn(2)(phpzMe)(2)(HphpzMe)(2)(OCH(3))]·2CH(3)OH (2), Na{[Mn(HphpzPh)(phpzPh)(MeOH)(2)](2)}(HCO(2)) (3), [Mn(HphpzPh)(2)(EtOH)(2)]ClO(4)·2EtOH (4) and [Mn(HphpzPh)(2)N(3)] (5) were synthesized and characterized with various techniques. 1, 4 and 5 are mononuclear manganese(iii) compounds, 2 is a mixed-valence dinuclear manganese(iii/iv) compound, and 3 is a trinuclear compound containing two manganese(iii) ions and a sodium(i) ion. A remarkable feature is the spontaneous formation of the formate ion as a result of the methanol or methoxide oxidation in compounds 1 and 3. Using ethanol precludes the formation of the formate and compound 4 is obtained. The molecular structure of all compounds is stabilized by supramolecular interactions, including strong hydrogen bonding and π-π interactions.     

Early stages in the degradation of metal-organic frameworks in liquid water from first-principles molecular dynamics

IRMOF-1 structures are known to suffer lattice break-up when exposed to water-rich environments, a limiting factor in their everyday use. To shed light on the underlying mechanism of disruption, the role of the metal in the secondary building unit (SBU) has been systematically investigated, and the global behaviour of IRMOF-1-type structures with the three metals Zn, Mg, and Be studied by Born-Oppenheimer Molecular Dynamics in liquid water. Results show that fully hydrated Be based compounds are stable up to 500 K while the equivalent structures with Mg or Zn break down already at 300 K. The reasons behind this instability are in the tendency of the metal atom to form penta- and hexa-coordination spheres and in the strength of the M-O bond. These are the key factors that generate unique breaking patterns for Mg and Zn IRMOF-1 analogues, as well as the reason for the high hydrothermal stability of the Be-IRMOF-1.     

Physico-chemical and anatomical characterization of residual lignocellulosic fibers

Anatomical and physico-chemical properties of residual natural fibers (sugarcane bagasse, coconut fibers and peanut hulls) were characterized in order to evaluate their potential for use in the production of particleboard. The bulk density was determined by helium pycnometer and the chemical characteristics by using an electronic pH meter (for pH determination) on fibers dissolved in acidic and neutral detergents (to determine the levels of cellulose, hemicellulose and lignin). The anatomical characteristics were established using scanning electron microscopy coupled with an X-ray detector system, as well as energy dispersive X-ray spectroscopy. Results indicated similarities and differences between physico-chemical and anatomical characteristics of the residual lignocellulosic fibers when compared with the Pinus sp. wood commercially employed in particleboard production. Bulk density and pH for residual lignocellulosic fibers and Pinus sp. wood presented analogous values. Similar amounts of cellulose and lignin were identified between waste fibers and Pinus sp. wood. The presence of silica was identified in coconut fiber, peanut hull and sugarcane bagasse waste fibers, and may affect the mechanical characteristics of panels. Coconut and sugarcane bagasse fibers show surface pores with diameters ranging from 1.2 to 2.1 μm, below the 5 μm identified for Pinus sp. wood. Both fibers present pores distributed over their entire surface, whereas peanut hull fibers have no pores on their surface. This characteristic contributes to resin dispersion among particles, reflecting positively on the physical–mechanical properties of the panels. Particleboards produced with residual lignocellulosic fibers present similar physical–mechanical properties to those of Pinus sp. wood panels.     

A quantum chemical study on the free radical scavenging activity of tyrosol and hydroxytyrosol

The free radical scavenging activity of hydroxytyrosol (HTyr) and tyrosol (Tyr) has been studied in aqueous and lipid solutions, using the density functional theory. Four mechanisms of reaction have been considered: single electron transfer (SET), sequential electron proton transfer (SEPT), hydrogen transfer (HT), and radical adduct formation. It was found that while SET and SEPT do not contribute to the overall reactivity of HTyr and Tyr toward ^·OOH and ^·OCH₃ radicals, they can be important for their reactions with ^·OH, ^·OCCl₃, and ^·OOCCl₃. The ^·OOH-scavenging activity of HTyr and Tyr was found to take place exclusively by HT, and it is also predicted to be the main mechanism for their reactions with ^·OCH₃. HT is proposed as the main mechanism for the scavenging activity of HTyr and Tyr when reacting with other ^·OR and ^·OOR radicals, provided that R is an alkyl or an alkenyl group. The major products of reaction are predicted to be the phenoxyl radicals. In addition, Tyr was found to be less efficient than HTyr as free radical scavenger. Moreover, while HTyr is predicted to be a good peroxyl scavenger, Tyr is predicted to be only moderately for that purpose.     

Chemiluminescent Detection of Carbohydrates in the Tumoral Breast Diseases

Nowadays, there is an increase of investigations into the fibroadenoma, mainly because some studies have shown that the occurrence of fibroadenoma is linked to an increased risk of developing breast carcinoma. Currently, the chemiluminescence biomarkers are applied for validation methods and screening. Here, a lectin chemiluminescence is proposed as new histochemistry method to identify carbohydrates in mammary tumoral tissues. The lectins concanavalin A (Con A) and peanut agglutinin (PNA) conjugated to acridinium ester were used to characterize the glycocode of breast tissues: normal, fibroadenoma, and invasive duct carcinoma (IDC). The lectin chemiluminescence expressed in relative light units (RLU) was higher in fibroadenoma and IDC than in normal tissue for both lectins tested. The relationship RLU emission versus tissue area described a linear and hyperbolic curve for IDC and fibroadenoma, respectively, using Con A whereas hyperbolic curves for both transformed tissues using PNA. RLU was abolished by inhibiting the interaction between tissues and lectins using their specific carbohydrates: methyl-α-d-mannoside (Con A) and galactose (PNA). The intrinsic fluorescence emission did not change with combination of the lectins (Con A/PNA) to the acridinium ester for hydrophobic residues. These results represent the lectin chemiluminescence as an alternative of histochemistry method for tumoral diagnosis in the breast.     

Characterization of Cellulolytic Extract from <Emphasis Type="Italic">Pycnoporus sanguineus</Emphasis> PF-2 and Its Application in Biomass Saccharification

The aim of this work was to evaluate the biochemical features of the white-rot fungi Pycnoporus sanguineus cellulolytic complex and its utilization to sugarcane bagasse hydrolysis. When cultivated under submerged fermentation using corn cobs as carbon source, P. sanguineus produced high FPase, endoglucanase, β-glucosidase, xylanase, mannanase, α-galactosidase, α-arabinofuranosidase, and polygalacturonase activities. Cellulase activities were characterized in relation to pH and temperature. β-Glucosidase and FPase activities were higher at 55 °C, pH 4.5, and endoglucanase activity was higher at 60 °C, in a pH range of 3.5–4.0. All cellulase activities were highly stable at 40 and 50 °C through 48 h of pre-incubation. Crude enzymatic extract from P. sanguineus was applied in a saccharification experiment using acid-treated and alkali-treated sugarcane bagasse as substrate, and the hydrolysis yields were compared to that obtained by a commercial cellulase preparation. Reducing sugar yields of 60.4% and 64.0% were reached when alkali-treated bagasse was hydrolyzed by P. sanguineus extract and commercial cellulase, respectively. Considering the glucose production, it was observed that P. sanguineus extract and commercial cellulase ensured yields of 22.6% and 36.5%, respectively. The saccharification of acid-treated bagasse was lower than that of alkali-treated bagasse regardless of the cellulolytic extract. The present work showed that P. sanguineus has a great potential as an enzyme producer for biomass saccharification.     

Electrochemical characterisation of a Zn/(PEO)4ZnCl2/Nb2O5 solid-state cell

The (PEO)₄ZnCl₂ electrolyte (PEO, polyethylene oxide) was studied in view of its potential application in a solid-state rechargeable zinc cell. The electrochemical stability window was established, and decomposition voltage values between 3.19 (20 °C) and 1.44 V (150 °C) were estimated. Cyclic voltammetry studies using a Pt/(PEO)₄ZnCl₂/Pt cell indicated reversibility of the Zn²⁺/Zn couple at the electrode/electrolyte interface. Laboratory cells Zn(−)/(PEO)₄ZnCl₂/Nb₂O₅(+) were assembled and studied at 55 °C, under various discharge current densities. Results of cell discharge profiles, capacity values, charge–discharge cycles and cell stabilities are reported.