Analytical modeling and experimental investigation of laser induction hybrid rapid cladding for Ni-based WC composite coatings

Laser induction hybrid rapid cladding (LIHRC) cannot only increase the cladding efficiency, but can also eliminate porosity and cracking of ceramic–metal composite coatings. In order to obtain a deep understanding of LIHRC with rapid cladding speed and high powder deposition rate, an analytical model of LIHRC for Ni-based WC composite coatings is proposed in the paper. The predictions of cladding height and powder efficiency obtained with this model are in good agreement with experimental results. Injection angles at which the attenuation rate of laser power is relatively low are identified and crack-free composite coatings with smooth surface, good profile and metallurgical bonding to substrate can be obtained. The calculated results for the temperature of the powder particles are compared to experimental data of the microhardness profiles and show a similar trend.     

The refractive index distribution of even polygonal selfoc lens

MATLAB diffusion partial differential toolboxes are used to solve the ion diffusion equation under even polygonal boundary conditions, such as square and hexagon, and obtain the dynamic process ion concentration during ion exchange. The exact solutions of the refractive index distribution are proved by the correctness. The ion concentration equation in even polygonal glass rod is calculated by the variable separation and coordinate transformation method. The computation results are in good agreement with the measured ones in the compound eye system.     

The 2-D growth of gold on single-layer graphene/Ru(0001): Enhancement of CO adsorption

The growth and morphology of two-dimensional (2-D) gold islands on a single-layer graphene supported on Ru(0001) have been studied by scanning tunneling microscopy (STM). Our findings show that gold exhibits 2-D structures up to a gold dosage of 0.75 equivalent monolayers, and that these 2-D gold islands are thermally stable at room temperature. Parallel polarization modulation infrared reflection absorption spectroscopic (PM-IRAS) and high resolution electron energy loss spectroscopic (HREELS) studies indicate that carbon monoxide (CO) adsorbs on these 2-D gold islands at 85 K, showing a characteristic CO stretching feature at 2095 cm^? 1 for a saturation coverage of CO. The red shift of the CO stretching frequency compared to that on charge neutral gold is consistent with electron transfer from graphene to gold, i.e., an electron-rich gold overlayer. Preliminary data obtained by dosing molecular oxygen onto this CO pre-covered surface suggest that the 2-D gold islands catalyze the oxidation of CO.     

Preparation of solution-based YBCO films with BaSnO3 particles

The YBCO films with BaSnO₃ (BSO) particles were prepared on LAO (0 0 1) substrates by metal organic deposition using trifluoroacetates (TFA-MOD) via introducing SnCl₄ powders into the YBCO precursor solution. It was found that with the increase of the SnCl₄ contents, the slower decomposition and higher temperature for nucleation during the reaction were requested compared to that of pure YBCO film. The YBCO films with different contents of Sn with dense surface and well c-alignment were obtained under optimized heat treatment, and the BaSnO₃ phases were detected by XRD analysis. Litter effect of BSO particles on the T_c and J_c values of YBCO films was found. All YBCO films with BSO particles had T_c values over 90 K and J_c values over 1 MA/cm². A significant enhancement of J_c was observed for YBCO films with BSO particles compared to that of pure YBCO film by the field dependence of J_c values. The best property was obtained for YBCO film with 6 mol.% Sn at 77 K under magnetic field. The results showed that the J_c value of YBCO film with 6 mol.% Sn was enhanced by a factor of 2 in 2 T, and over a factor of 10 beyond 4 T compared to that of pure YBCO film.     

Properties of the πh 9/2 ⊗ νi 13/2 band in odd-odd 188Au

A new rotational band has been identified and assigned to ¹⁸⁸Au for the first time using the ¹⁷³Yb(¹⁹F,4nγ) reaction at the beam energies of 86 and 90 MeV. This band is proposed to be built on the πh _9/2 ⊗ νi _13/2 configuration by comparing the band properties with known bands in neighboring nuclei. The prolate-to-oblate shape transition through triaxial shape has been proposed to occur around ¹⁸⁸Au for the ηh _9/2 ⊗ νi _13/2 bands in odd-odd Au isotopes on the basis of total Routhian surface (TRS) calculations.

     

Dammann光栅在光互连中的应用

本文将Ｄａｍｍａｎｎ光栅［１，２］应用于光互连，提出了用Ｄａｍｍａｎｎ光栅实现完全混洗的方法．一个２×２的Ｄａｍｍａｎｎ光栅与一个成像透镜的组合，具有与四焦点透镜类似的成像作用．像面上，像的位置与Ｄａｍｍａｎｎ光栅的位置有关，适当选择光栅的位置可以实现不同元素数目及不同元素密度的完全混洗．本文给出了有关的理论推导及实验结果．     

多道HCN激光干涉仪在HL－1装置上的电子密度分布测量

本文描述了为测量ＨＬ－１装置电子密度分布而研制的多道远红外（ＦＩＲ）激光干涉仪系统及其特点。首次对装置在弹丸加料以及拉瓦尔（Ｌａｖａｌ）超声分子束注入实验条件下的等离子体电子密度时－空分布进行了观测和初步分析。同时，介绍一种处理密度相移信号的新方法。     

多重网格法在燃烧室内流场数值模拟中的应用

多重网格法在燃烧室内流场数值模拟中的应用林文漪，杨彬，周力行（清华大学工程力学系北京１０００８４）关键词：多重网格，数值模拟，湍流一、前言现代燃烧设备多具有复杂的流场结构、多级燃烧的特点及庞大的几何尺寸，无疑地为其数值模拟带来了困难。为了保证计算精度...