Three-Way Decision Models Based on Ideal Relations in Multi-Attribute Decision-Making

In recent years, research on applications of three-way decision (e.g., TWD) has attracted the attention of many scholars. In this paper, we combine TWD with multi-attribute decision-making (MADM). First, we utilize the essential idea of TOPSIS in MADM theory to propose a pair of new ideal relation models based on TWD, namely, the three-way ideal superiority model and the three-way ideal inferiority model. Second, in order to reduce errors caused by the subjectivity of decision-makers, we develop two new methods to calculate the state sets for the two proposed ideal relation models. Third, we employ aggregate relative loss functions to calculate the thresholds of each object, divide all objects into three different territories and sort all objects. Then, we use a concrete example of building appearance selection to verify the rationality and feasibility of our proposed models. Furthermore, we apply comparative analysis, Spearman’s rank correlation analysis and experiment analysis to illustrate the consistency and superiority of our methods.     

Bias dependence of a deep submicron NMOSFET response to total dose irradiation

Deep submicron n-channel metal-oxide-semiconductor field-effect transistors (NMOSFETs) with shallow trench isolation (STI) are exposed to ionizing dose radiation under different bias conditions.The total ionizing dose radiation induced subthreshold leakage current increase and the hump effect under four different irradiation bias conditions including the worst case (ON bias) for the transistors are discussed.The high electric fields at the corners are partly responsible for the subthreshold hump effect.Charge trapped in the isolation oxide,particularly at the Si/SiO 2 interface along the sidewalls of the trench oxide creates a leakage path,which becomes a dominant contributor to the offstate drain-to-source leakage current in the NMOSFET.Non-uniform charge distribution is introduced into a threedimensional (3D) simulation.Good agreement between experimental and simulation results is demonstrated.We find that the electric field distribution along with the STI sidewall is important for the radiation effect under different bias conditions.     

Load optimal design for a primary test stand facility based on a zero-dimensional load model

In order to couple the numerical simulation of a primary test stand driver with an optimal load design, a zero-dimensional wire array load model is designed based on the Saturn load model using PSPICE, which is an upgraded version of the Simulation Program with Integrated Circuit Emphasis (SPICE) designed by the ORCAD Corporation to perform circuit simulations. This paper calculates different load parameters and discusses factors influencing the driving current curve. With appropriate driving current curves chosen, further magneto-hydrodynamic calculations are carried out and discussed to provide the best results for experiments. The suggested optimal load parameters play an important role in experimental load design.     

非即变相位共轭反馈对半导体激光器动态特性的影响

从四波混频产生相位共轭的物理原因出发,定义了相位共轭镜（PCM）的响应时间．建立起非即变相位共轭反馈条件下半导体激光器的外腔模型。以响应时间及频率失调为参变量,对其分岔及噪声等动态行为进行数值分析。结果表明,不考虑噪声影响时,增加相位共轭镜响应时间会使混沌带出现的次数和范围得到较大的抑制,当响应时间增大到1．5ns时,混沌带消失,半导体激光器保持稳定的单周期状态;考虑噪声影响后,随若响应时间的相对强度噪声（RIN）可减小几dB甚至十几dB,产生突变需要的反馈量也增大一个数量级以上,且其频谱的峰值向高频方向移动;另外,由于共轭反馈引起的频率失调低于半导体激光器激射频率3个数量级以上．它只对分岔特性有影响．对相对强度噪声的影响几乎为零。     

Influence of cesium on the stability of a GaAs photocathode

The stability of a reflection-mode GaAs photocathode has been investigated by monitoring the photocurrent and the spectral response at room temperature.We observe the photocurrent of the cathode decaying with time in the vacuum system under the action of Cs current,and find that the Cs atoms residing in the vacuum system are helpful in prolonging the life of the cathode.We examine the evolution and analyse the influence of the barrier on the spectral response of the cathode.Our results support the double dipolar model for the explanation of the negative electron affinity effect.     

超声波声孔效应中气泡动力学的研究

在超声快速制取组织细胞病理切片的过程中，发现激励信号对切片制取效果有明显的影响.为了掌握超声激励信号对组织细胞的影响规律，达到快速制取病理切片的最佳状态，从气泡空化模型入手，通过改变激励信号频率、声压、气泡初始半径和液体黏滞系数等参量，研究了声孔效应中气泡动力学激励机制.数值计算表明：空化泡振动随激励声压增强而升高，随液体黏滞系数增强而减弱；一定频率范围内空化泡振动能保持在膨胀、收缩和振荡的稳定空化状态，存在空化泡稳态振动的最佳激励频率；一定初始半径能保证空化泡产生稳定的振动，存在空化泡稳态振动幅度最大的初始半径.实际操作中，在频率、声压、初始半径和黏滞系数综合作用的若干空化阈内，声孔效应使超声快速法制取细胞组织切片获得最佳效果. 关键词： 声孔效应 超声空化 气泡振动 稳态空化域     

Synthesis, Structure and H+/K+-ATPase Inhibitory Activity of Novel Triazolyl Substituted Tetrahydrobenzofuran Derivatives via One-pot Three-component Click Reaction

Eleven triazolyl substituted tetrahydrobenzofuran derivatives were synthesized in high yields as novel H⁺/K⁺‐ATPase inhibitor via one‐pot CuI‐catalyzed three‐component click reaction of azide, secondary amine and 3‐bromopropyne under mild conditions in water. Their structures were characterized by NMR, IR, ESI‐MS, elemental analysis and single‐crystal X‐ray diffraction analysis. Most of the target compounds exhibited better H⁺/K⁺‐ATPase inhibitory activity than commercial omeprazole with IC₅₀ values less than 15 µmol·L^?1. The initial structure‐activity analysis suggested that the triazole substituted by cycloalkyl, aromatic ring or O‐containing side‐chain seemed to be beneficial for enhancing the activity.     

紧凑型X-pinch装置探头标定

 介绍了紧凑型X-pinch脉冲功率装置的电流电压测量设计方法。根据该装置的同轴传输线结构特点,研制了一种利用金属膜连接传输线外筒与负载外筒,构成回路测量负载电流的探头。在传输线末端设计电容分压器作为测量负载电压的探头,并利用电路模拟软件对此过程进行模拟,同时这两个探头需要进行在线标定。实验研究结果表明,该探头性能稳定、响应快,是测量负载电流与电压的理想工具。     

四氯苯醌与嘧啶类核酸碱基的光化学氢抽取和电子转移反应

采用纳秒时间分辨的激光闪光光解实验技术,研究了四氯苯醌(TCBQ)分子与两种嘧啶核酸碱基(胸腺嘧啶和尿嘧啶)分子在355nm激发下的光化学反应动力学. 355 nm将TCBQ分子布居到激发三重态³TCBQ^*,高反应活性的³TCBQ^*与碱基分子发生两个平行的反应,氢抽取反应和电子转移反应,分别对应生成瞬态光谱上观测到的两个光反应产物TCBQH·和TCBQ·^-. 这两个反应同时生成的碱基自由基和碱基阳     

强磁场中氢原子的能级结构

发展了一套简单高效的非微扰理论方法研究强磁场中的原子能级结构.作为例子,给出了磁场强度从0到1000个原子单位,氢原子基态和低激发态的结合能以及四极矩等重要原子能级结构参数.结果表明:相对于其他的高精度计算方法,该方法不仅能计算出高精度的能级位置而且可方便给出精确的电子波函数.此外,该法还具有很强的普适性,可直接推广到原子与任意方向的交叉电磁场相互作用的研究. 关键词： 强磁场 CWDVR谱方法 氢原子能级结构 四极矩