Two 3D supramolecular polymers constructed from an amino acid and a high-nuclear Ln6Cu24 cluster node

The first successful attempt to construct 3D supramolecular frameworks with high-nuclear 3d-4f heterometallic clusters as a node is reported. The self-assembly of Ln3+, Cu2+ and amino acid in solution leads to the formation of two polymers, 35-nuclear complex [Sm6Cu29] 1 with a primitive cubic net-like structure and 36-nuclear complex [Nd6Cu30] 2 with a face-centred cubic network type structure. Glycine and L-proline, respectively, were used as ligands. It should be noted that 2 has a chiral framework. X-ray structure analyses show that 1 crystallizes in the triclinic P1 space group (a=19.6451(8), b=20.4682(8), c=20.7046(8) A, alpha=89.453(1), beta=66.290(1), gamma=68.572(1) degrees, V=7003.0(5) A3 and Z=1) and 2 belongs to the cubic P2(1)3 space group (a=b=c=32.4341(3) A, V=34 119.7(5) A3 and Z=4). Both complexes utilize Ln6Cu24 octahedral clusters as nodes and trans-Cu(amino acid)2 groups as bridges. Electrical conductivity measurements reveal that both polymers behave as semiconductors.     

Low-energy paths for the unimolecular decomposition of CH3OH: a G2M/statistical theory study

The potential energy surface (PES) of the CH3OH system has been characterized by ab initio molecular orbital theory calculations at the G2M level of theory. The mechanisms for the decomposition of CH3OH and the related bimolecular reactions, CH3 + OH and 1CH2 + H2O, have been elucidated. The rate constants for these processes have been calculated using variational RRKM theory and compared with available experimental data. The total decomposition rate constants of CH3OH at the high- and low-pressure limits can be represented by k infinity = 1.56 x 10(16) exp(-44,310/T) s-1 and kAr0 = 1.60 x 10(36) T-12.2 exp(-48,140/T) cm3 molecule-1 s-1, respectively, covering the temperature range 1000-3000 K, in reasonable agreement with the experimental values. Our results indicate that the product branching ratios are strongly pressure dependent, with the production of CH3 + OH and 1CH2 + H2O dominant under high (P > 10(3) Torr) and low (P < 1 atm) pressures, respectively. For the bimolecular reaction of CH3 and OH, the total rate constant and the yields of 1CH2 + H2O and H2 + HCOH at lower pressures (P < 5 Torr) could be reasonably accounted for by the theory. For the reaction of 1CH2 with H2O, both the yield of CH3 + OH and the total rate constant could also be satisfactorily predicted theoretically. The production of 3CH2 + H2O by the singlet to triplet surface crossing, predicted to occur at 4.3 kcal mol-1 above the H2C...OH2 van der Waals complex (which lies 82.7 kcal mol-1 above CH3OH), was neglected in our calculations.     

Synthesis and Photophysical and Electrochemical Study of Tyrosine Covalently Linked to High‐Valent Copper(III) and Manganese(IV) Complexes

As bio‐inspired chemical model of the oxygen‐evolving complex (OEC) in photosystem II, a new tyrosine‐modified corrole ligand 3 and its high‐valent copper and manganese complexes 3a and 3b were synthesized and characterized. The copper complexes 1a and 2a of corrole 1 and 2 were also prepared for comparison. The emission property indicates that the emission of ligands 2 and 3 is located at 670 nm, but no emission is observed for their metal complexes due to its suppression by the metal center. The electrochemical study shows that 3a might dimerize at the first two reversible oxidations, a behavior which was not observed in the case of 1a and 2a . The corrolato manganese(IV) complex 3b shows one reversible reduction and one quasireversible oxidation at ?0.17 and 0.77 V vs. Ag/Ag⁺, respectively.     

Synthesis and characterization of monodispersed core-shell spherical colloids with movable cores

Gold nanoparticles have been conformally coated with amorphous silica (using a sol-gel method) and then an organic polymer (via surface-grafted, atom transfer radical polymerization) to form spherical colloids with a core-double-shell structure. The thickness of silica and polymer shells could be conveniently controlled in the range of tens to several hundred nanometers by changing the concentration of the reagent and/or the reaction time. Selective removal of the silica layer (through etching in aqueous HF) led to the formation of hollow polymer beads containing movable gold cores. This new form of core-shell particles provides a unique system for measuring the feature size and transport property associated with hollow particles. In one demonstration, we showed that the thickness of a closed polymer shell could be obtained by mapping the electrons backscattered from the core and shell. In another demonstration, the plasmon resonance band of the gold cores was used as an optical probe to follow the diffusion kinetics of chemical reagents across the polymer shells.     

A novel method of the separation/preconcentration and determination of trace molybdenum(VI) in water samples using microcrystalline triphenylmethane loaded with salicyl fluorone

It is the first time that triphenylmethane was used as an adsorbent to preconcentrate and separate trace amount of molybdenum in water samples. The effects of different parameters, such as acidity, stirring time and various metal ions, the amounts of triphenylmethane and salicyl fluorine, etc. on the enrichment yield of molybdenum have been studied to optimize the experimental conditions. Under the optimum conditions, molybdenum can be adsorbed on the surface of microcrystalline triphenylmethane loaded with salicyl fluorone by the intermolecular action strength. The possible reaction mechanism for the enrichment of molybdenum was discussed in detail in this paper. Mo(VI) can be completely separated from Pb(II), Co(II), Cu(II), Cr(III), Ni(II), Hg(II), Zn(II), Cd(II), Fe(III) and Al(III) in the solution. The proposed method was successfully applied to the determination of trace amount of molybdenum in various water samples by spectrophotometry after preconcentration using microcrystalline triphenylmethane. The preconcentration factor is from 83 (500 ml water sample was enriched to 6.0 ml) to 166 (1000 ml water sample was enriched to 6.0 ml). The detection limit is 1.3 × 10⁻⁵ mg l⁻¹ and the linearity is maintained in the concentration range 3.8 × 10⁻³ to 0.36 mg l⁻¹ with a correlation coefficient of 0.9998. The recoveries are in the range of 93.5-104%. The relative standard deviation is 1.8-2.9%. Analytical results obtained with this novel method are very satisfactory.     

电化学检测在流动注射分析中的应用

评述了近几年来电化学检测在流动注射分析中的应用，展望了流动注射电化学分析法的发展动向。     

Self-assembly, optical behavior, and permeability of a novel capsule based on an azo dye and polyelectrolytes

A novel capsule composed of an azo dye, Congo red (CR), and different polymers, including poly(styrenesulfonate, sodium salt) (PSS), poly(allylamine hydrochloride) (PAH), and poly(diallyldimethylammonium chloride) (PDDA), have been successfully fabricated by the layer-by-layer self-assembly technique. The stepwise linear deposition process was monitored by means of UV-visible absorption measurements. The formation of hollow capsules was verified by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). The resulting hollow PSS/PAH/CR/PDDA capsules displayed a sensitive response to visible light. Optical changes of the hollow capsules prior to and after the photoreaction were investigated in detail by means of UV-visible spectroscopy, CLSM, and SFM. It was found that the photochemical reaction of the assembled hollow capsules depends strongly on the matrix. Qualitative results on the permeability of the hollow capsule walls with CR as one component indicate that the permeability of the walls can be easily photo-controlled at varying irradiation time intervals without addition of external chemicals.     

Interactions of hemoglobin with lecithin liposomes

In this paper, the interaction of hemoglobin (Hb) with lecithin liposomes is studied by UV-vis spectroscopy, fluorescent spectroscopy, and transmission electron microscopy. The adsorption of Hb on liposomes is likely to be related to the hydrophobic interaction between Hb and liposomes, which brings about the increase of the microenvironmental polarity (I ₁/I ₃) and the decrease of the fluorescence polarization (P) of lecithin liposomes. These results are considered to be that the adsorption of Hb on liposomes makes the spaces between the lecithin molecules increase, and a temporary gap is consequently formed in the liposomal bilayer membranes. The leakage of aqueous-space marker from the liposomes is increased with the addition of Hb.     

Bioinspired manganese complexes catalyzed epoxidation for the synthesis of the epoxyketone fragment of carfilzomib

We report herein an efficient catalytic epoxidation reaction for the synthesis of epoxyketone (tert-butyl ((S)-4-methyl-1-((R)-2-methyloxiran-2-yl)-1-oxopentan-2-yl)carbamate), which is an important synthetic intermediate of carfilzomib.     

Study on the interaction between nucleic acids and cationic surfactants

The interactions of nucleic acids and cationic surfactants (cetylpyridine bromide (CPB) and cetyltrimethylammonium bromide (CTMAB)) in aqueous solution have been studied using the techniques of resonance light scattering (RLS) spectroscopy, the absorption spectroscopy, zeta potential assay and NMR assignment measurement. It is considered that CPB or CTMAB can assemble on the surface of nucleic acid via electrostatic and hydrophobic forces, which results in the formation of large associate of nucleic acid-cationic surfactant and RLS enhancement of nucleic acid. Besides these forces, the pi-pi stacking force between CPB and nucleic acid also exists in the associate. In comparison with CTMAB, CPB has larger enhancement on RLS of nucleic acid, which is attributed to that the enhancement of the former is only due to the absorption of the bases of nucleic acid, while the enhancement of the latter is own to the synergetic resonance caused by the absorption of both bases of nucleic acid and the pyridyl in CPB. These results have important implication for understanding the influence of surfactants on nucleic acid functionality in life science.