Synthesis and Tuberculostatic Activity of Some 1,1-Bis-methylthio-2-nitro-ethene Derivatives

1,1-bis-methylthio-2-nitro-ethene was used as a substrate to the syntheses of new heterocyclic compounds. In the reactions, with 1-phenylpiperazine—the corresponding diaminonitroethane 1 , 1,3-diaminonitropropane, and 1,3-diaminonitropropanol—the nitromethylenotetrahydropyrimidine derivatives 2 and 3 were prepared, whereas, with o-phenylenediamine—2-nitromethyleno-benzimidazole 4 were obtained. In the condensation reactions of compounds 2 , 3 , and 4 with benzoyl isothiocyanate, the products 5 , 6 , and 7 were obtained, and afterwards two of them, 5 and 6 , were transformed into the isothiazolines 8 and 9 .

1,1-bis-(4-phenylpiperazino)-2-nitroethane ( 1 ) was exposed to the action of phenyl isothiocyanate and the derivative obtained ( 10 ) was transformed, in the reaction with phenacylbromide, in to benzoylonitrothiophene 11 . The diazo compounds 12 , 13 , and 14 were obtained in the reactions of nitromethylenotetrahydropyrimidines 2 and 3 and of 2-nitromethylenobenzimidazole 4 with benzenediazonium chloride. The derivatives obtained were tested in vitro for their tuberculostatic activity. The compounds 7 (MIC 8–32 μg/mL) and 14 (MIC 16–63 μg/mL) appeared to be the most active compounds.     

Synthesis of Some New Imidazo[4,5-B]Pyridine Derivatives Using 2-Cyanomethyl-1-Methyl-1H-Imidazo[4,5-B]Pyridine

Abstract

The reactions of 2-cyanomethyl-1-methyl-1H-imidazo[4,5-b]pyridine with isothiocyanates, nitroso compounds, acid chlorides, and thioglycolic acid were investigated. New imidazo[4,5-b]pyridine derivatives with various substituents in 2-position and derivatives of the new pyrrolo[2′,1′:2,3]imidazo[4,5-b]pyridine ring system were synthesized. The compounds obtained were tested in vitro for their tuberculostatic activity.     

Studies on Pyrazine Derivatives,XLV: Synthesis,Reactions, and Tuberculostatic Activity of N-Methyl-N′-(pyrazine-2-carbonyl)-hydrazinecarbodithioic Acid Methyl Ester

Methyldithiocarbonyl derivative 2 of pyrazine-2-carboxylic acid N′-methyl-hydrazide 1 was synthesized by methylation of CS₂ adduct. Benzylamine caused the decomposition of compound 2 to pyrazine-2-carboxylic acid benzylamide 5 and 1,3-dibenzylthiourea 6. N-methyl-N′-(pyrazine-2-carbonyl)-hydrazinecarbodithioic acid methyl ester 2 were evidenced to cyclize to 3-methyl-5-pyrazin-2-yl-3H-[1, 3, 4]oxadiazole-2-thione 8 in the presence of triethylamine. In the reactions with secondary amines such as morpholine, pyrrolidine and phenylpiperazine pyrazinoyl derivatives (9–11) of thiosemicarbazide were obtained. Hydrazine, methylhydrazine, aminoalcohols, and N-alkylamino-substituted cyclic amines reacted with cyclization to 4-substituted 1,2,4-triazole-3-thiones 12, 13, and 18–22. Synthesized compounds exhibited low tuberculostatic activity in vitro (MIC 50–100 μg/mL).     

Sustainable Green Processing of Grape Pomace Using Micellar Extraction for the Production of Value-Added Hygiene Cosmetics

This study sought to evaluate the possibility of using grape pomace, a waste material from wine production, for the preparation of cosmetic components. Following the existing clear research trend related to improving the safety of cleansing cosmetics, an attempt was made to determine the possibility of preparing model shower gels based on grape pomace extract. A new method for producing cosmetic components named loan chemical extraction (LCE) was developed and is described for the first time in this paper. In the LCE method, an extraction medium consisting only of the components from the final product was used. Thus, there were no additional substances in the cosmetics developed, and the formulation was significantly enriched with compounds isolated from grape pomace. Samples of the model shower gels produced were evaluated in terms of their basic parameters related to functionality (e.g., foaming properties, rheological characteristics, color) and their effect on the skin. The results obtained showed that the extracts based on waste grape pomace contained a number of valuable cosmetic compounds (e.g., organic acids, phenolic compounds, amino acids and sugars), and the model products basis on them provided colorful and safe natural cosmetics.     

Effects of low-dose ionizing radiation on α,β-globulins solutions studied by DSC

An attempt has been made to detect the effect of a small dose of ionizing radiation on the course of α,β-globulin thermal denaturation in aqueous solutions. Doses of 0.1 and 1.8 Gy have been delivered using γ-rays emitted by ⁶⁰Co isotope while doses of 10 and 100 Gy have been supplied by X-rays produced by linear accelerator. The highest dose has visibly changed DSC curve of protein solution while the changes due to lower doses are hardly detectable. Although very weak, the irradiation effect found has been dose dependent. The results suggest that the influence of ionizing radiation on globulins solution is bigger when the dose rate is lower at given dose. The opposite direction of differences between irradiated and control samples for fresh and stored protein solutions suggests various characters of changes in initial and later period of sample aging. This may be an important reason for difficulties in an investigation of the effect of ionizing radiation on protein solution, especially for low doses delivered very slowly.     

Osmotic and Activity Coefficients of CH3SO4Na(aq) and CH3SO4K(aq) at 25°C

The osmotic and activity coefficients of aqueous sodium and potassium methyl sulfates have been determined at 25°C by the isopiestic method, in the molality range from ca.0.2 to 25 and 19 mol-kg^–1, respectively. The results have been discussed in terms of the ion–ion and ion–water interactions on the basis of the Pitzer and Mayorga model and a method developed in our laboratory.     

Reactions of OH and NO radicals with 1,1-dichloroethylene in argon matrices. FTIR and theoretical studies

HONO/1,1-dichloroethylene/Ar matrices were subjected to UV radiation (lambda > 340 nm) from a medium pressure mercury lamp. The products of the photolysis were studied experimentally by means of FTIR spectroscopy and theoretically using the ab initio MP2 method. Two conformers of 2-nitroso-2,2-dichloroethanol molecule have been identified as the final products of the double addition reaction of the OH, NO radicals to 1,1-dichloroethylene. The additional reactive species observed in the matrix is tentatively identified as an 1,1-dichloro-2-hydroxyethyl radical, an intermediate formed by single addition of OH to 1,1-dichloroethylene. The three photoproducts have been identified and observed for the first time. The identities of the products have been justified by comparison with the experiments with deuterated DONO and by performing concentration and annealing studies as well as by reference to the spectral data of related molecules. The results of the quantum mechanical calculations confirmed both the assignment of the new molecules and mechanism of the reaction observed in our experiment.     

Novel sample treatment procedures for the determination of phosphorus in Cu‐based alloys using X‐ray fluorescence spectrometry to solve the microstructural effect issue

The accurate analysis of hard CuP and CuPAg‐type solders using X‐ray fluorescence spectrometry is a difficult task. Surface milling, the most common sample preparation method for calibration materials, results in poor accuracy for the phosphorus analysis, as evidenced by the unacceptable values of the root mean square error. Meanwhile, the analysis of real samples provides incorrect results, and microstructural effects are the main source of error. Thus, this effect was negated by considering the information depth of the phosphorus Kα line and the microstructure size of the alloys. Phosphorus was measured using a thin layer of the sample (a thickness of several micrometers). As a result, the analyzed layer was a poor representative of the sample. Two different approaches for solving the microstructural effect issue were proposed. In the first method, the alloy was remelted under controlled conditions to obtain fine‐grain samples, which successfully limited the microstructural effects. The second solution used specially prepared thin layer samples, and the sample dissolution eliminated the microstructural effect. Using the developed sample treatment methods resulted in an improvement in the accuracy of the phosphorus calibration curves. This allowed for the correct determination of phosphorus and other alloying elements in the Cu‐based alloys with low uncertainties.     

Formation and stabilization of persistent free radicals

We demonstrate that stable and relatively unreactive “environmentally persistent free radicals (PFRs)” can be readily formed in the post-flame and cool-zone regions of combustion systems and other thermal processes. These resonance-stabilized radicals, including semiquinones, phenoxyls, and cyclopentadienyls, can be formed by the thermal decomposition of molecular precursors including catechols, hydroquinones and phenols. Association with the surfaces of fine particles imparts additional stabilization to these radicals such that they can persist almost indefinitely in the environment. A mechanism of chemisorption and electron transfer from the molecular adsorbate to a redox-active transition metal or other receptor is shown through experiment, and supported by molecular orbital calculations, to result in PFR formation. Both oxygen-centered and carbon-centered PFRs are possible that can significantly affect their environmental and biological reactivity.     

Efficient Preparation and X-Ray Structure Analyses of (2R)-N-pyruvoyl- and (2R)-N-(phenylglyoxyloyl)bornane-10,2-sultam

An efficient synthesis of the two title compounds is reported, as well as their X-ray crystal-structure analyses. A discussion based on stereoelectronic considerations rationalizes the first example of a crystalline SO₂/C(O) syn-periplanar conformer of a N-acylbornane-10,2-sultam.