Synthesis, coordination behavior, and reduction chemistry of cymantrenyl-1,3-bis(2,3,4,5-tetraphenyl)borole

We describe the synthesis of base-free bisborole [Cym(?)(BC(4)Ph(4))(2)]-Cym(?)=(OC)(3)Mn(η(5)-C(5)H(3))-and its transformation into two fully characterized Lewis acid-base adducts with pyridine bases of the type 4-R-NC(5)H(4) (R=tBu, NMe(2)). The results of electrochemical, as well as NMR and UV/Vis spectroscopic studies on [Cym(?)(BC(4 Ph(4))(2)] and the related monoborole derivative [Cym(BC(4)Ph(4))]-Cym=(OC)(3)Mn(η(5)-C(5) H(4))-provided conclusive evidence for 1) the enhanced Lewis acidity of the two boron centers that result from conjugation of two borole fragments, and 2) the fact that Mn-B bonding interactions between the Lewis acidic borole moieties and the Mn center are considerably less pronounced for bisborole [Cym(?)(BC(4)Ph(4))(2)]. In addition, the reduction chemistry of [Cym(?)(BC(4)Ph(4))(2)] has been studied in detail, both electrochemically and chemically. Accordingly, chemical reduction of [Cym(?)(BC(4)Ph(4))(2)] with magnesium anthracene afforded the corresponding tetraanion, which features a rare Mg-OC bonding mode in the solid state.     

Synthesis,Coordination Behavior,and Reduction Chemistry of Cymantrenyl‐1,3‐bis(2,3,4,5‐tetraphenyl)borole

We describe the synthesis of base‐free bisborole [Cym^?(BC₄Ph₄)₂]—Cym^?=(OC)₃Mn(η⁵‐C₅H₃)—and its transformation into two fully characterized Lewis acid–base adducts with pyridine bases of the type 4‐R? NC₅H₄ (R=tBu, NMe₂). The results of electrochemical, as well as NMR and UV/Vis spectroscopic studies on [Cym^?(BC₄Ph₄)₂] and the related monoborole derivative [Cym(BC₄Ph₄)]—Cym=(OC)₃Mn(η⁵‐C₅H₄)—provided conclusive evidence for 1) the enhanced Lewis acidity of the two boron centers that result from conjugation of two borole fragments, and 2) the fact that Mn? B bonding interactions between the Lewis acidic borole moieties and the Mn center are considerably less pronounced for bisborole [Cym^?(BC₄Ph₄)₂]. In addition, the reduction chemistry of [Cym^?(BC₄Ph₄)₂] has been studied in detail, both electrochemically and chemically. Accordingly, chemical reduction of [Cym^?(BC₄Ph₄)₂] with magnesium anthracene afforded the corresponding tetraanion, which features a rare Mg? OC bonding mode in the solid state.     

Bulk Gas‐Phase Acidity

The capability of a gaseous Brønsted acid HB to deliver protons to a base is usually described by the gas‐phase acidity (GA) value of the acid. However, GA values are standard Gibbs energy differences and refer to individual gas pressures of 1 bar for acid HB, base B^?, and proton H⁺. We show that the GA value is not suited to describe the bulk acidity of a gaseous acid. Here the pressure dependence of the activities of HB, H(HB)_n⁺, and B(HB)_m^? that result from gaseous autoprotolysis have to be considered. In this work, the pressure‐dependent absolute chemical potential of the proton in the representative gaseous proton acids CH₄, NH₃, H₂O, HF, and HCl was worked out and the general theory to describe bulk gas phase acidity—that can directly be compared with solution acidity—was developed.     

Structural characterisation of thiol-modified hyaluronans

Fourier-transform infrared spectroscopy and non-isothermal methods—chemiluminometry, differential scanning calorimetry, and differential thermogravimetry—were used to characterize potential structural changes of thiol-modified hyaluronans. Degradative conditions tested via rotational viscometry were first initiated applying oxidative Weissberger’s system in a reaction system under aerobic conditions. Several low-molecular-weight thiol compounds—cysteamine, l-cysteine, and N-acetyl-l-cysteine—were subsequently tested for their potential antioxidative effects against hyaluronan degradation. It was shown that different final values of dynamic viscosity of hyaluronan solutions were dependent on the thiol structure and its initial concentration. An idea has been put forward that together with the reduction of the hyaluronan molecular weight, which is a consequence of fragmentation, the degradation products might contain associated or even cross-linked structures. In the case of N-acetyl-l-cysteine application, the carbonaceous residue evidenced by differential thermogravimetry was increased when compared to that of intact hyaluronan.     

Analysis of dammar resin with MALDI‐FT‐ICR‐MS and APCI‐FT‐ICR‐MS

Comprehensive analysis of high‐resolution mass spectra of aged natural dammar resin obtained with Fourier transform ion cyclotron resonance mass spectrometer (FT‐ICR‐MS) using matrix‐assisted laser desorption/ionization (MALDI) and atmospheric pressure chemical ionization (APCI) is presented. Dammar resin is one of the most important components of painting varnishes. Dammar resin is a terpenoid resin (dominated by triterpenoids) with intrinsically very complex composition. This complexity further increases with aging. Ten different solvents and two‐component solvent mixtures were tested for sample preparation. The most suitable solvent mixtures for the MALDI‐FT‐ICR‐MS analysis were dichloromethane‐acetone and dichloromethane‐ethanol. The obtained MALDI‐FTMS mass spectrum contains nine clusters of peaks in the m/z range of 420–2200, and the obtained APCI‐FTMS mass spectrum contains three clusters of peaks in the m/z range of 380–910. The peaks in the clusters correspond to the oxygenated derivatives of terpenoids differing by the number of C₁₅H₂₄ units. The clusters, in turn, are composed of subclusters differing by the number of oxygen atoms in the molecules. Thorough analysis and identification of the components (or groups of components) by their accurate m/z ratios was carried out, and molecular formulas (elemental compositions) of all major peaks in the MALDI‐FTMS and APCI‐FTMS spectra were identified (and groups of possible isomeric compounds were proposed). In the MALDI‐FTMS and APCI‐FTMS mass spectrum, besides the oxidized C₃₀, triterpenoids also peaks corresponding to C₂₉ and C₃₁ derivatives of triterpenoids (demethylated and methylated, correspondingly) were detected. MALDI and APCI are complementary ionization sources for the analysis of natural dammar resin. In the MALDI source, preferably polar (extensively oxidized) components of the resin are ionized (mostly as Na⁺ adducts), whereas in the APCI source, preferably nonpolar (hydrocarbon and slightly oxidized) compounds are ionized (by protonation). Either of the two ionization methods, when used alone, gives an incomplete picture of the dammar resin composition. Copyright © 2012 John Wiley & Sons, Ltd.     

¹H and ¹³C-NMR data of the simplest plumeran indole alkaloids isolated from Aspidosperma species

Indole alkaloids are the chemotaxonomic markers of the Aspidosperma genera. Those that have the simplest plumeran skeleton are classified as the precursors of biosynthetic routes and the intermediates for several synthetic reactions. This work aims to review the 1H and 13C-NMR data, up to 2011, describing the skeleton of 35 different plumeran indole alkaloids, from a group of 46 of them, and highlight the main spectral differences amongst them.     

Fluorescent ion-imprinted polymers for selective Cu(II) optosensing

This paper describes the synthesis and characterization of a fluorescent ion-imprinted polymer (IIP) for selective determination of copper ions in aqueous samples. The IIP has been prepared using a novel functional monomer, 4-[(E)-2-(4′-methyl-2,2′-bipyridin-4-yl)vinyl]phenyl methacrylate (abbreviated as BSOMe) that has been spectroscopically characterized in methanolic solution, in the absence and in the presence of several metal ions, including Cd(II), Cu(II), Hg(II), Ni(II), Pb(II), and Zn(II). The stability constant (2.04 × 10⁸ mol⁻² l²) and stoichiometry (L₂M) of the BSOMe complex with Cu(II) were extracted thereof. Cu(II)-IIPs were prepared by radical polymerization using stoichiometric amounts of the fluorescent monomer and the template metal ion. The resulting cross-linked network did not show any leaching of the immobilized ligand allowing determination of Cu(II) in aqueous samples by fluorescence quenching measurements. Several parameters affecting optosensor performance have been optimized, including sample pH, ionic strength, or polymer regeneration for online analysis of water samples. The synthesized Cu(II)-IIP exhibits a detection limit of 0.04 μmol l⁻¹ for the determination of Cu(II) in water samples with a reproducibility of 3%, exhibiting an excellent selectivity towards the template ion over other metal ions with the same charge and close ionic radius. The IIP-based optosensor has been repeatedly used and regenerated for more than 50 cycles without a significant decrease in the luminescent properties and binding affinity of the sensing phase.     

Magnetic techniques for the detection and determination of xenobiotics and cells in water

Magnetic techniques based on the application of magnetic nanoparticles and microparticles and films have been successfully used for the determination and detection of different types of xenobiotics (e.g. herbicides, insecticides, fungicides, aromatic and polyaromatic hydrocarbons, pentachlorophenol and heavy metal ions) as well as viruses, microbial pathogens and protozoan parasites in water samples. Preconcentration of xenobiotics from large volumes of samples can be performed using magnetic solid-phase extraction, stir-bar sorptive extraction and related procedures. This review provides basic information about these techniques. Published examples of successful applications document the importance of these simple and efficient procedures employing magnetic materials.     

Structural changes in metallothionein isoforms revealed by capillary electrophoresis and Brdicka reaction

Metallothionein (MT) as a potential cancer marker is at the center of interest and its properties, functions and behavior under various conditions is intensively studied. In the present study, two major mammalian MT isoforms (MT‐1 and MT‐2) were separated using capillary electrophoresis (CE) coupled with UV detector in order to describe their basic behavior. Under the optimized conditions, the separation of both isoforms was enabled as well as estimation of detection limits as subunits and units of ng per μL for MT‐2 and MT‐1, respectively. Further, the effects of thermal treatment and the presence of denaturing agent such as urea on MT‐1 and MT‐2 isoforms were studied by CE‐UV. Thermal treatment caused an increase in the signals of both isoforms. A new parameter called precipitation rate has been defined based on this finding. This parameter can be expressed as a slope of the linear regression of the time dependency curve recalculated on the MT concentration. The thermal precipitation rate for MT‐1 and MT‐2 was determined as 1.1 and 0.9 ng of MT/min, respectively. The chemical precipitation rate calculated from the linear regression for both isoforms provided the same value of 0.25 ng of MT/min. The results were confirmed by manual spectrometric measurements and by differential pulse voltammetry Brdicka reaction. Based on these results, a model of MT behavior under the conditions studied was suggested.