Preparation of macroporous polyHIPE foams via radiation-induced polymerization at room temperature

PolyHIPEs are highly porous, crosslinked polymer foams typically synthesized within high internal-phase emulsions (HIPEs). Two kinds of polyHIPEs including poly(styrene-divinylbenzene) [P(St-DVB)] and poly(methyl methacrylate-divinylbenzene) [P(MMA-DVB)] foams are synthesized in this work, which are fabricated from HIPEs template via radiation-induced polymerization at room temperature. Traditional free radical polymerization initiated by potassium peroxydisulfate (KPS) at 60 °C for producing polyHIPE P(St-DVB) foams is also conducted for comparison. It is found that the amount of emulsifier can be reduced greatly in the radiation-induced polymerization of HIPEs at room temperature, compared with the traditional polymerization approach. Besides, P(MMA-DVB) PolyHIPE foams with a fine microstructure of highly interconnected pores have been successfully fabricated via radiation-induced polymerization in this work, which is usually difficult to be prepared by thermal-initiation method because of the intermediate hydrophobicity of methyl methacrylate monomer. The influences of the fraction of internal aqueous phase and the concentration of emulsifier on the structure and performance of foams are carefully explored. The structure and compression strength of the foams are characterized by scanning electron microscopy and a mechanical testing machine, respectively.

A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.     

Facile synthesis of gemini surface-active ATRP initiator and its use in soap-free AGET ATRP mini-emulsion polymerisation

A novel cationic gemini surfactant has been readily synthesised in 70 % total yield. The functional gemini surfactant can act both as an emulsifier and an atom transfer radical polymerisation (ATRP) initiator in mini-emulsion polymerisation of methyl methacrylate (MMA), in which no other emulsifier was required. 1-(Dimethylamino)dodecane (N,N-dimethyldodecylamine, DMDA) was found to be a good ligand in the activator generated by electron transfer (AGET) ATRP reaction. Kinetic studies indicated that the polymerisation featured controlled/living radical polymerisation.     

硫醇类配体修饰金纳米粒子在嵌段共聚物中自组装的研究进展

本文综述了不同类型硫醇配体修饰金纳米粒子的合成方法以及功能性金纳米粒子在嵌段共聚物薄膜中的自组装研究进展,重点介绍了硫醇类配体修饰金纳米粒子的合成方法,包括Brust合成法、原位合成法、grafting from合成法、配体置换法、单晶模板法等。总结了硫醇基小分子或聚合物配体修饰的金纳米粒子与嵌段共聚物之间自组装的调控方法,如利用配体与嵌段共聚物组分的隔离作用、配体与嵌段共聚物组分形成的氢键作用、溶剂蒸气退火或热退火等诱导嵌段共聚物/纳米粒子复合薄膜自组装。展望了功能性金纳米粒子以及嵌段共聚物/金纳米复合材料的发展方向。     

Highly selective determination of rhodium(III) using silica gel surface-imprinted solid-phase extraction

A novel Rh(III)-imprinted amino-functionalised silica gel sorbent was prepared by a surface imprinting technique for preconcentration and separation of Rh(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with the traditional solid sorbents and non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher adsorption capacity and selectivity for Rh(III). The maximum static adsorption capacity of the imprinted and non-imprinted sorbent for Rh(III) was 29.86?mg?g^?1 and 11.23?mg?g^?1, respectively. The imprinted Rh(III) was removed with 2?mL of 3% thiourea?+?2?mol?L^?1 HCl. The obtained imprinted particles exhibited excellent selectivity and rapid kinetics process for Rh(III). The relatively selective factor (α_r) values of Rh(III)/Ru(III), Rh(III)/Au(III), Rh(III)/Pt(IV), Rh(III)/Ir(IV), Rh(III)/Pd(II) were 26.7, 39.0 29.2, 28.1, 43.7, respectively, which were greater than 1. The detection limit (3σ) of the method was 0.26?µg?L^?1. The relative standard deviation of the method was 1.79% for eight replicate determination of 10?µg of Rh³⁺ in 200?mL water sample. The method was validated by analysing standard reference material (GBW 07293), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace rhodium(III) in geological samples with satisfactory results.     

Enhancement inhibition efficiency of PBTCA depending on the inclusion complex with hydroxypropyl-β-cyclodextrin

For the first time, hydroxypropyl-β-cyclodextrin (HP-β-CD) has been brought in to include 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) in order to enhance inhibition efficiency of PBTCA, which leads a new approach to study oil–gas field corrosion inhibition in the process of acid treatment. Based on the host–guest inclusion reaction, the inclusion complex of PBTCA with HP-β-CD has been prepared in the laboratory. UV–Vis absorption spectrum was applied to study the inclusion behavior of PBTCA with HP-β-CD. The results revealed that PBTCA with HP-β-CD can form a 1:1 stoichiometry inclusion complex. The 1:1 inclusion complex synthesized by using lyophilization was further characterized by Fourier transform infrared spectroscopy. Besides, inhibition effect of the inclusion complex on the corrosion inhibition of Q235 carbon steel has been investigated in 0.1 M sulfuric acid (H₂SO₄) solution using potentiodynamic polarization, electrochemical impedance spectroscopy techniques and scanning electron microscopy (SEM). It was found that the presence of the inclusion complex better achieved the anti-corrosion property in aggressive medium than was the case with alone PBTCA and the highest inhibition efficiency of the inclusion complex over 90 % was obtained, which are suggestive of the active effect of the inclusion complex for improving inhibition efficiency of PBTCA. Meanwhile, the results obtained from SEM further showed that the inclusion complex acts as a more efficient corrosion inhibitor for Q235 carbon steel in H₂SO₄ medium.     

A novel synthetic method for preparation of some folates

An improved method was developed for preparation of 5,6,7,8-tetrahydrofolic acid (THF) and calcium-5-methyltetrahydrofolate (5-MTHF-Ca) by reduction of folic acid using KBH₄ catalyzed by Pb(NO₃)₂. The yields of THF and 5-MTHF-Ca were 56.5 and 42.7 %, respectively. A convenient method for measurement of THF and 5-MTHF-Ca using liquid chromatography–mass spectrometry (LC–MS) was also established, enabling analysis of those folates within 10 min without application of gradient elution.     

A Triazatruxene‐Based Glycocluster as a Fluorescent Sensor for Concanavalin A

A new triazatruxene‐based fluorescent glycocluster has been designed, synthesized, and fully characterized by NMR spectroscopy and mass spectrometry. Furthermore, its specific and selective binding properties with concanavalin A (Con A) have been investigated by fluorescence spectroscopy, circular dichroism (CD) spectroscopy, and turbidity assay. The obtained results showed that the multivalent mannose‐modified triazatruxene exhibited specific binding with Con A, but no binding to peanut agglutinin (PNA) lectin or bovine serum albumin (BSA), corresponding to a two‐orders‐of‐magnitude higher affinity than that of monovalent mannose ligands. Most interestingly, a fluorescence enhancement of the triazatruxene‐based glycocluster was observed upon binding with Con A because of hydrophobic interactions involving sites close to the triazatruxene moiety. Furthermore, the inhibitory ability of the triazatruxene‐based glycocluster against ORN178‐ induced haemagglutination has been investigated by haemagglutination inhibition assay. The results indicated selective binding with ORN178.     

Blood Proteins Strongly Reduce the Mobility of Artificial Self‐Propelled Micromotors

Autonomous self‐propelled catalytic microjets are envisaged as an important technology in biomedical applications, including drug delivery, micro/nanosurgery, and active dynamic bioassays. The direct in vivo application of these microjets, specifically in blood, is however impeded by insufficient knowledge on the in vivo viability of the technique. This study highlights the effect of blood proteins on the viability of the microjets. The presence of blood proteins, including serum albumin and γ‐globulins at physiological concentrations, has been found to dramatically reduce the viability of the microjets. The reduction of viability has been measured in terms of a lower number of active microjets and a decrease in the velocity of propulsion. It is clear from this study that in order for microjets to function in biomedical applications, different modes of propulsion besides platinum‐catalyzed oxygen bubble ejection must be employed. These findings have serious implications for the biomedical applications of catalytic microjets.     

Exploring the Reactivity of Multicomponent Photocatalysts: Insight into the Complex Valence Band of BiOBr

The band structure of multicomponent semiconductor photocatalysts, as well as their reactivity distinction under different wavelengths of light, is still unclear. BiOBr, which is a typical multicomponent semiconductor, may have two possible valence‐band structures, that is, two discrete valence bands constructed respectively from O 2p and Br 4p orbitals, or one valence band derived from the hybridization of these orbitals. In this work, aqueous photocatalytic hydroxylation is applied as the probe reaction to investigate the nature and reactions of photogenerated holes in BiOBr. Three organic compounds (microcystin‐LR, aniline, and benzoic acid) with different oxidation potentials were selected as substrates. Isotope labeling (H₂¹⁸O as the solvent) was used to determine the source of the O atom in the hydroxyl group of the products, which distinguishes the contribution of different hydroxylation pathways. Furthermore, a spin‐trapping ESR method was used to quantify the reactive oxygen species (^.OH and ^.OOH) formed in the reaction system. The different isotope abundances of the hydroxyl O atom of the products formed, as well as the reverse trend of the ^.OH/^.OOH ratio with the oxidative resistance of the substrate under UV and visible irradiation, reveal that BiOBr has two separate valence bands, which have different oxidation ability and respond to UV and visible light, respectively. This study shows that the band structure of semiconductor photocatalysts can be reliably analyzed with an isotope labeling method.