一种新型双参量光纤布喇格光栅传感器的研制

介绍了一种新型的具有双参量测量功能的光纤布喇格光栅传感器.该传感器采用了特殊的结构,安装了两个不同中心波长的光纤布喇格光栅,可以实现两曲面之间狭小间隙的微小位移和温度的同时测量.实验表明,该传感器结构紧凑、体积小,具有良好的重复性和稳定性,位移测量误差不超过±10 μm,温度测量误差不超过±2℃.     

The thermal blooming of high-energy beams from a solid-state heat-capacity laser in the atmosphere

Based on the one-aerosol model, we investigate the influence of thermal blooming on the propagation of solid-state heat-capacity laser (SSHCL) beams in atmosphere. By employing only this aerosol model and ignoring the diffraction and atmospheric turbulence, we evaluate the change in the average transmittance when the incident intensity and the propagation distance are changed. We conclude that the effect of thermal blooming on the propagation of SSHCL beams in the atmosphere is dependent on the incident intensity and the propagation distance. As the incident intensity and propagation distance increase, the influence of thermal blooming on the average transmittance strengthens. However, when the incident intensity is not strong enough, the incident intensity barely affects the average transmittance. PACS 42.65.Jx; 42.55.Rz; 42.68.Ay; 42.68.Jg     

Efficient all solid-state continuous-wave orange laser at 598 nm

We report for the first time a continuous-wave (CW) orange radiation at 598 nm by intracavity sum-frequency generation of 1341 nm Nd:GdVO₄ laser and 1080 nm Nd:YAlO₃ (Nd:YAP) laser. Orange laser is obtained by using a doubly cavity, type-II critical phase matching KTP crystal sum-frequency mixing. With total pump power of 36 W, TEM₀₀ mode orange laser at 598 nm of 268 mW is obtained. The orange power stability in 30 min is better than 3.8%.     

Analytic vectorial structure of circular flattened Gaussian beams

By means of the method of vector angular spectrum representation and the mathematical techniques, the analytically vectorial structure of the circular flattened Gaussian beam (CFGB) is derived without any approximation, which can be applicable to an arbitrary observation plane. In the far-field, the analytical formulae of the TE and the TM terms are further simplified using the method of stationary phase. The analytical expressions of the energy flux for the TE term, the TM term, and the CFGB are also presented. The energy flux distributions of the TE term, the TM term, and the CFGB are demonstrated in different reference planes, and the evolvement of the patterns of the TE term, the TM term, and the CFGB upon propagation are graphically illustrated.     

基于高光谱成像技术的油菜叶片SPAD值检测

以油菜叶片为研究对象,利用高光谱成像技术,成功建立了叶绿素相对值SPAD值的预测模型。共采集了160个油菜叶片样本在380～1030 nm范围内的高光谱图像。选择500～900 nm之间的平均光谱作为油菜叶片样本的光谱。利用蒙特卡罗最小二乘法(monte carlo partial least squares, MC-PLS)剔除了13个异常样本,基于剩余的147个样本光谱数据与SPAD测量值进行分析,采用了不同的方法建立了多种预测模型,包括：全光谱的偏最小二乘法(partial least squares, PLS)模型,连续投影算法(successive projections algorithm, SPA)选择特征波长的PLS预测模型,“红边”位置(λ_red)的简单经验估测模型,三种植被指数R₇₁₀/R₇₆₀,(R₇₅₀-R₇₀₅)/(R₇₅₀-R₇₀₅)和R₈₆₀/(R₅₅₀*R₇₀₈)分别建立的简单经验估测模型,以及基于这三种植被指数的PLS预测模型。建模结果显示,全光谱的PLS模型预测效果最为精确,其预测相关系数r_p为0.833 9,预测均方根误差RMSEP为1.52。而使用SPA算法选出的8个特征波长所建立的PLS模型其预测结果可达到与全光谱的PLS模型非常接近的水平,而且在保证一定精度的条件下减少了大量运算,节省了运算时间,大幅提高了建模的速度。而基于红边位置和选择的三种植被指数而建立的简单经验估计模型其预测结果虽与基于全光谱的PLS预测模型有一定差距,但模型简单、运算量小,适合用于对精度要求不高的场合,对后续的便携仪器设备开发有一定的指导作用。     

Polymer Optical Fiber Photosensitivities and Highly Tunable Fiber Gratings

In this paper, recent progress in the investigation of photosensitivities of polymer optical fibers and the development of polymer optical fiber grating is reported. Photosensitivities in various polymer fibers, including doped and undoped, multimode and single-mode polymer fibers, have been experimentally characterized and evaluated for fiber grating application. In particular, the wavelength dependence of material absorption and photosensitivity has been found essential to the fabrication of polymer optical fiber grating. Based on the results of photosensitivity research, polymer optical fiber gratings have been successfully fabricated. More importantly, polymer optical fiber grating has been demonstrated highly tunable, with a tuning range more than 70 nm. The unique feature of high tunability in polymer optical fiber grating has great potential in various applications including optical fiber WDM systems and fiber sensor systems. Several important issues that remain to be investigated will also be discussed.     

原子相干性对 V型三能级原子自发辐射的影响

本文分别就两种模型,即三能级原子与单模场和双模场的V型相互作用,研究了原子相干性对原子自发辐射的影响.发现在单模情况,原子相干性导致原子自发辐射的消除;而在双模情况,两个跃迁通道的自发辐射是相互独立的,原子相干性不导致原子自发辐射的消除.     

A high-gain porous silicon metal–semiconductor–metal photodetector through rapid thermal oxidation and rapid thermal annealing

2 tungsten lamp at 1.83 mA excited by a 0.85-mW 675-nm laser diode. We also demonstrate that the dark current could be greatly reduced through rapid thermal oxidation and rapid thermal annealing. Received: 4 August 1997/Accepted: 28 May 1998     

Possible Critical Orientations of Interacting Composite Particles

We obtain possibly valuable information about the phase diagram linked to the critical orientations for composite matter subjected to interactions at high fermion as well as boson number density but low temperature, which is not easily accessible to experiments. Our results qualitatively resemble those proposed before by using other theories once we can calibrate our results by tuning the critical orientation and the rarefaction measure (relevant to the temperature).     

Parametric resonance of truncated conical shells rotating at periodically varying angular speed

Parametric resonance of a truncated conical shell rotating at periodically varying angular speed is studied in this paper. Based upon the Love?s thin shell theory and generalized differential quadrature (GDQ) method, the equations of motion of a rotating conical shell are derived. The time-dependent rotating speed is assumed to be a small and sinusoidal perturbation superimposed upon a constant speed. Considering the periodically rotating speed, the conical shell system is a parametric excited system of the Mathieu–Hill type. The improved Hill?s method is utilized for parametric instability analysis. Both the primary and combination instability regions for various natural modes and boundary conditions are obtained numerically. The effects of relative amplitude and constant part of periodically rotating speed and cone angle on the instability regions are discussed in detail. It is shown that for the natural mode with lower circumferential wavenumber, only the primary instability regions exist. With the increasing circumferential wavenumber, the instability widths are reduced significantly and the combination instability region might appear. The results for different boundary conditions are substantially similar. Increasing the constant rotating speed (or cone angle) all lead to the movements of instability regions and the appearance of combination instability region. The former will cause the instability width increasing, while the latter will reduce the instability width. The variation of length-to-radius ratio only causes the movements of instability regions.