Usefulness of cyclodextrin media for the determination of α-cypermethrin by photochemically induced fluorescence: analytical applications to natural waters

The photochemically induced fluorescence (PIF) spectral properties of α-cypermethrin in organic solvents (hexane, dichloromethane, acetonitrile, ethanol) and in cyclodextrin aqueous solutions (β-CD and 2-hydroxypropyl-β-CD, 2-HP-β-CD) were investigated. The photolysis kinetics of α-cypermethrin were evaluated in the various media. The PIF signal was found to be significantly enhanced in the CD media relative to the organic solvents. The stoichiometry and the formation constants of the α-cypermethrin inclusion complexes formed with the CDs were determined. The analytical performances of the PIF method were improved in the presence of HP-β-CD relative to the other media, and a CD-enhanced PIF analytical method was developed. The limits of detection and limits of quantification ranged, respectively, between 6 and 98 ng/mL and between 24 and 343 ng/mL, depending on the medium. Application to the analysis of tap water and Senegal natural water samples collected close to agricultural areas and spiked with α-cypermethrin yielded satisfactory recoveries going from about 77% to 98%. An interference study of foreign species, including pesticides and inorganic ions likely to be present in natural waters, was also carried out. Figure Photolysis reaction of α-cypermethrin in presence of HP-β-CD     

Affinity monolithic capillary columns for glycomics/proteomics: 1. Polymethacrylate monoliths with immobilized lectins for glycoprotein separation by affinity capillary electrochromatography and affinity nano-liquid chromatography in either a single column or columns coupled in series

In this report, microcolumn separation schemes involving monolithic capillary columns with immobilized lectins, and relevant to nanoglycomics/nanoproteomics were introduced. Positive and neutral monoliths based on poly(glycidyl methacrylate-co-ethylene dimethacrylate) were designed for achieving lectin affinity chromatography (LAC) by nano-LC and CEC. The positive monoliths (i.e., monoliths with cationic sites) afforded relatively high permeability in nano-LC but lack predictable EOF magnitude and direction, while neutral monoliths provided a good compromise between reasonable permeability in nano-LC and predictable EOF in CEC. Lectin affinity nano-LC permitted the enrichment of classes of different glycoproteins having similar N-glycans recognized by the immobilized lectin, whereas lectin affinity CEC provided the simultaneous capturing and separation of different glycoproteins due to differences in charge-to-mass ratio. Also, this investigation demonstrated for the first time the coupling of lectin capillary columns in series (i.e., tandem columns) for enhanced separation of glycoproteins by LAC using the CEC modality. Furthermore, in the coupled columns format, glycoforms of a given glycoprotein were readily separated.     

Analytical Expressions for the Mixed-Order Kinetics Parameters of TL Glow Peaks Based on the two Heating Rates Method

The two heating rates method (originally developed for first-order glow peaks) was used for the first time to evaluate the activation energy (E) from glow peaks obeying mixed-order (MO) kinetics. The derived expression for E has an insignificant additional term (on the scale of a few meV) when compared with the first-order case. Hence, the original expression for E using the two heating rates method can be used with excellent accuracy in the case of MO glow peaks. In addition, we derived a simple analytical expression for the MO parameter. The present procedure has the advantage that the MO parameter can now be evaluated using analytical expression instead of using the graphical representation between the geometrical factor and the MO parameter as given by the existing peak shape methods. The applicability of the derived expressions for real samples was demonstrated for the glow curve of Li₂B₄O₇:Mn single crystal. The obtained parameters compare very well with those obtained by glow curve fitting and with the available published data.     

Synthesis,characterization, dielectric and rectification properties of PANI/Nd2O3:Al2O3 nanocomposites

Polyaniline–Nd₂O₃:Al₂O₃ nanocomposites were prepared by in situ oxidative polymerization method using different weight percentages of oxide powders. The prepared nanocomposites were characterized by Fourier transform infrared spectroscopy and X‐ray diffraction for molecular and crystal structures. Scanning electron microscopy and transmission electron microscopy images show the tubular structure of polyaniline nanocomposite with embedded metal oxides. The electrical conductivity of the nanocomposites increases with increase in temperature as well as with concentration of Nd₂O₃:Al₂O₃ particles in polyaniline. This is because of the hopping of charge polarons and extended chain length of the nanocomposites as evidenced by the negative thermal coefficient (NTC) characteristic. A high NTC value of 2.67 was found in nanocomposites with 15 wt% of oxide particles. These nanocomposites show low dielectric constant and dielectric loss; the electrical conductivity is higher than 0.3 S/cm as confirmed by Cole–Cole plot that indicates a decrease in both grain resistance and bulk resistance of the nanocomposites. The current–voltage and capacitance–voltage measurements were also carried out. The carrier mobility μ values of pure polyaniline and nanocomposites were found to be 4.27 × 10^?3 and 1.45 × 10^–2 H.M^?1, respectively. A significant enhancement in carrier mobility was observed in comparison with the literature. Copyright © 2016 John Wiley & Sons, Ltd.     

Feasibility on a piezoresistive tactile normal force sensor array

The plasmon resonance of periodic and random arrays of Au-nanodiscs and nano-squares was investigated experimentally and numerically. By randomization, plasmon resonance spectra become broadened, however, the electro-magnetic field enhancement is augmented by a factor of 10–10 $^2$ times at some specific wavelength as shown by the finite-element time-domain calculations. The spatial localization takes place at a fewer hot-spots. The randomized structures are promising for the applications in opto-electronics, sensing and light harvesting.     

Impedance study of polymethyl methacrylate composites/multi-walled carbon nanotubes (PMMA/MWCNTs)

The dielectric behavior of polymethyl methacrylate/multi-walled carbon nanocomposites (PMMA/MWCNTs) was investigated using impedance spectroscopy technique. The composites were prepared using melt mixing with MWCNTs loading ranging from 0.01 to 10 wt%. The experimental results showed that the measured impedance reflects the insulating behavior of the host material (PMMA) with no appreciable effects of the filler less than 8.5 wt%. However, for the sample containing 10 wt%, the calculated value of dc conductivity increases with increasing temperature from 2.0×10⁻⁶ (Ω m)⁻¹ to attain a value of 4.8×10⁻⁶ (Ω m)⁻¹ at 110 °C. The percolation threshold derived from the dielectric data was estimated to be higher than 8.5 wt% and lower than 10 wt%. A temperature dependent electrical relaxation phenomenon was only observed in the sample containing 10 wt% of MWCNTs. The frequency dependence of the ac conductivity data followed a power law.     

Palladium-catalysed direct arylation of a tris-cyclometallated Ir(III) complex bearing 2,2'-thienylpyridine ligands: a powerful tool for the tuning of luminescence properties

Palladium-catalysed direct 5-arylation of metallated thiophenes of fac-Ir(N^C(3')-thpy)(3) with aryl bromides via C-H bond functionalisation allows the synthesis of a variety of new Ir complexes in only one step (thpyH = 2,2'-thienylpyridine). The method offers simple modification of the nature of the ligand and hence of the photophysical properties of such complexes.     

Geodesic diameter of sets defined by few quadratic equations and inequalities

We prove a bound for the geodesic diameter of a subset of the unit ball in ${\mathbb{R}^n}$ described by a fixed number of quadratic equations and inequalities, which is polynomial in n, whereas the known bound for general degree is exponential in n. Our proof uses methods borrowed from D’Acunto and Kurdyka (to deal with the geodesic diameter) and from Barvinok (to take advantage of the quadratic nature).     

Effect of temperature on growth of psychrophilic and psychrotrophic members of Rhodotorula aurantiaca

The thermodependence of growth kinetic parameters was investigated for the Antarctic psychrophilic strain Rhodotorula aurantiaca and a psychrotrophic strain of the same species isolated in Belgium (Ardennes area). Cell production, maximum growth rate (μ_max), and half-saturation constant for glucose uptake (Ks) of both yeasts were temperature dependent. For the two yeasts, a maximum cell production was observed at about 0°C, and cell production decreased when temperature increased. The μ_max values for both strains increased with temperature up to a maximum of 10°C for the psychrophilic strain and 17°C for the psychrotrophic strain. For both yeasts, Ks for glucose was relatively constant at low temperatures. It increased at temperatures above 10°C for the psychrophilic strain and 17°C for the psychrotrophic strain. Although its glucose affinity was lower, the psychrotrophic strain grew more rapidly than the psychrophilicone. The difference in growth rate and substrate affinity was related to the origin of the strain and the adaptation strategy of R. aurantiaca to environmental conditions.