Facile solvent-free synthesis of pure-phased AlN nanowhiskers at a low temperature

Pure hexagonal aluminum nitride (AlN) nanowhiskers have been successfully synthesized by directly reacting AlCl₃ with NaN₃ in non-solvent system at the low temperature of 450 °C for 24 h. The obtained products are characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy and selected area electron diffraction, which show that the obtained products are hexagonal phase AlN nanowhiskers with width from 10 to 80 nm and length up to several micrometers. The influencing factors of the formation of AlN nanowhiskers were discussed and a possible growth mechanism for AlN nanowhiskers was proposed. Additionally, the study on the corresponding optical properties and catalytic properties is also carried out.     

WATER-BLOWN POLYURETHANE RIGID FOAMS MODIFIED BY CHEMICAL PLASTICATION

1. INTRODUCTIONThese years, HCFC-141b may be the most used blowing agent for its useful properties. But, because of its high global warming effect leading to the destruction of the ozone layer, production of HCFC141b has been forbidden. However, there are…     

Modification of the halogen end groups of polystyrene prepared by ATRP

The stabilization modification of the halogen end groups of polystyrene prepared by atom transfer radical polymerization (ATRP) has been attempted. The reaction mechanism adopted is radical chain transfer reaction, and iso-propylbenzene is employed as not only the chain transfer agent but also the solvent. Moreover, Cu⁰ is used as the acceptor of the transformed halogen atom in some experiments. As evidenced by ¹H NMR analysis of the modified products, the halogen end group can really be converted into the much more stable carbon-hydrogen structure. When Cu⁰ is not used, the conversion of the halogen end groups rises rapidly during the early stage and the increase rate slows down after about 8 h reaction. In view of the influence of reaction temperature on the modification, the conversion increases almost exponentially with temperature in the range of 80-100 °C, and the increase rate slows down at higher temperature. ¹H NMR and SEC analyses prove that the modification reaction does not destroy the polymer backbone and the molecular weights remain almost the same as those of the unmodified samples. When Cu⁰ is introduced, the modification reaction proceeds much rapidly, the conversion of the halogen end groups rises almost linearly at the early stage and the nearly complete (>95%) dehalogenation of the polymeric chains is observed after only 12 h reaction. However, the molecular weights rise and the polydispersities become wider after the modification, which implies that the modification is accompanied with the couple termination of the polystyrene radicals besides chain transfer reaction. Furthermore, the couple termination can be restrained at some lower catalyst concentration. Indeed, the modified polymers show improved thermal stability, the initial weight loss temperatures is increased from 196 °C to 378 °C for the linear polystyrene and from 203 °C to 261 °C for the hyperbranched polystyrene.     

LyP-1 peptide-functionalized gold nanoprisms for SERRS imaging and tumor growth suppressing by PTT induced-hyperthermia

The gold nanoprisms (GNPs) have exhibited special plasmonic properties for biomedical applications because of their unique shapes and dimensions. Based on their optical performance, the NIR dye IR780 not only enabled the GNPs-based nanosystem as SERRS nanoparticles for Raman-encoded molecular imaging, but also enhanced the plasmonic photothermal property by laser irradiation. Meanwhile, the GNPs/IR780-Lyp-1 by introduction of tumor-homing peptide segment LyP-1, which presents high affinity to p32 protein, demonstrated the increased enrichment in tumor region and enhanced photothermal therapy efficacy.     

水相中乙醇对胶体泡沫性质的影响

用不同比例的水-乙醇混合物作水相制备了胶体泡沫（CLA）,实验观察并测定了CLA的形态、粒径分布、半衰期、Zeta电位、水相溶液的粘度和水相/油相之间的界面张力等性质.结果表明，水相中加入乙醇会影响CLA的稳定性和粒径大小,但对CLA的Zeta电位影响不大.乙醇对CLA稳定性的影响主要是由于乙醇分子嵌入到界面膜中导致膜的强度变化以及水相粘度发生变化导致CLA粒子间隙的排液过程发生变化.     

星状四芳胺类空穴传输材料的合成

有机电致发光器件 (ＯＥＬＤ)是继阴极射线管平板显示器 (ＣＲＴ)和液晶显示器 (ＬＣＤ)之后的第三代平板显示器。它具有主动发光、驱动电压低(2伏左右 )、发光亮度高 (1 3 0 0 0ｃｄ ｍ2 以上 ) ,无软Ｘ 射线污染 ,响应速度快 (1 0 -6 ～ 1 0 -8秒 )等优点。从 1 987年美藉华人邓清云等提出多层结构的ＯＥＬＤ的器件结构以来的十多年间 ,ＯＥＬＤ以及其材料的研究已成为显示技术以及显示材料等方面的研究热点 ,发展很快[1～ 3] 。在 1 999年日本先锋公司已开发出了单色的汽车用ＯＥＬ平板显示器商品 ,今年东芝公司又开发出了 2 .7英寸的彩…     

Differential-pulse voltammetric determination of trace formaldehyde using magnetic microspheres and magnetic electrode

A new type of magnetic polymer microsphere containing acylhydrazine groups on the surface was synthesized. They can be reacted with formaldehyde to produce an electroactive adduct. Reduction of these derivatives following aggregation on a magnetic electrode is possible and is effective in the indirect determination of formaldehyde. The experimental conditions and electrode structure are discussed. Under the optimum conditions, it was found that the peak potential (Ep) of formaldehyde is -1.01 V (vs. Ag/AgCl). Formaldehyde in the range 1-1000 micrograms l-1 can be determined. The detection limit for formaldehyde is 0.3 microgram l-1 and the relative standard deviation for the determination of 100 micrograms l-1 formaldehyde was 2.26%. The method was applied to the determination of formaldehyde in environmental samples with satisfactory results.     

Determination of trace hydrazine by differential pulse voltammetry using magnetic microspheres

A new type of magnetic polymer microspheres containing ketone groups on the surface was synthesized. It can be reacted with hydrazine to produce electroactive adduct. Reduction of this derivative that was aggregated on the magnetic electrode is possible and effective in indirect determination of hydrazine. The experimental conditions and electrode structure were discussed. Under optimum conditions, It was found that the peak potential (Ep) of hydrazine is -1.06 V (vs. Ag/AgCl). Hydrazine in the range 0.3-500 mug l(-1) can be determined. The detection limits for hydrazine is 0.1 mug l(-1). The relative standard deviation for determination of 100 mug l(-1) hydrazine was 2.43 %. The method was applied to the determination of hydrazine in water samples with satisfactory results.     

The tautomerism of Omeprazole in solution: a 1H and 13C NMR study

The tautomerism of 5(6)-methoxy-2-([(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl] sulfinyl)-1H-benzimidazole (omeprazole) was determined in solution, K(T) = 0.59 in THF at 195 K, in favor of the 6-methoxy tautomer. The assignment of the signals was made by comparison with its two N-methyl derivatives in acetone-d6 and through theoretical calculations of the absolute shieldings (GIAO/DFT/6-311++G**).     

A multifunctional Pasteurella multocida sialyltransferase: a powerful tool for the synthesis of sialoside libraries

A multifunctional sialyltransferase has been cloned from Pasteurella multocida strain P-1059 and expressed in E. coli as a truncated C-terminal His6-tagged recombinant protein (tPm0188Ph). Biochemical studies indicate that the obtained protein is (1) an alpha2,3-sialyltransferase (main function), (2) an alpha2,6-sialyltransferase, (3) an alpha2,3-sialidase, and (4) an alpha2,3-trans-sialidase. The recombinant tPm0188Ph is a powerful tool in the synthesis of structurally diverse sialoside libraries due to its relaxed substrate specificity, high solubility, high expression level, and multifunctionality.