膜厚监控系统的光谱宽度对窄带滤光片性能的影响

讨论了膜厚监控系统的光谱宽度对波分复用窄带滤光片特性的影响,分析了监控过程中所出现的信号异常现象,其主要原因是控制光光谱宽度以及控制波长与滤光片中心波长不一致,所以控制光光谱分辨率必须小于单个法布里-珀罗滤光片最后2层膜折转点波长宽度的一半,即对100GHz的滤光片,监控系统的光谱宽度必须小于0．2nm。一旦产生中心波长偏离,就必定产生厚度控制误差。讨论了高折射率膜和低折射率膜的信号变化规律,发现当中心波长比监控波长长时,虽然信号变化规律正确,但判读到极值时的膜厚变薄。中心波长偏离越长,厚度将越薄。而当中心波长比监控波长短时,信号将出现反转。中心波长越短,反转量越大。最后指出了监控误差对滤光片Tmax和半峰全宽的影响。     

160 km all-optical OFDM transmission system with inline chromatic dispersion compensation

An experimental demonstration of an all-optical sampling orthogonal frequency division multiplexing (AOS-OFDM) transmission system with inline chromatic dispersion (CD) compensation is carried out to test the nonlinear influence. With five subcarriers non-return-to-zero (NRZ) modulated, the total bit rate is 50 Gb/s without polarization multiplexing. The receiver end is highly simplified with direct detection using optical Fourier transform filter. After transmission in 160-km standard single-mode fiber (SSMF) link with 130-ps/nm residual CD, an optimum input optical power for the system performance is achieved.     

Synthesis and luminescence properties of a broad-band red phosphor Ca3Si2O7:Eu2+ for warm white light-emitting diodes

Single-phase broad-band red-emitting Ca₃Si₂O₇:Eu²⁺ phosphors, with photoluminescence features that qualify them as candidates for white light-emitting diodes applications, were successfully synthesized via a modified solid-state reaction method that employed H₃BO₃ as a flux. The phosphors produced have an intense broad red emission band, with a peak at 603 nm, a full width at half maximum of 110 nm, and color coordinates of (0.550, 0.438). Concentration quenching occurred at 0.01 mol Eu²⁺. The discussion of the results shows that Eu²⁺ ions should be accommodated at the Ca-sites of the lattice, dipole–dipole interactions should predominantly govern the energy transfer mechanism among them, and the critical distance between them is ～31 Å.     

NMR evidence for the charge transfer from interstitial NO or O2 to molecule C60 in solid C60

Solid C₆₀ was stored in NO and O₂ under high pressure, and the molecule NO and O₂ were found to diffuse into the octahedral interstitial sites in its fcc crystal lattice. Their ¹³C NMR MAS spectra composed of a primary resonance at 143.7 ppm, accompanied by several minor peaks shifted downfield respectively. The spectra at various temperatures from 210 to 300 K have been measured, and the chemical shifts of the minor peaks referenced to the primary resonance versus inverse temperature show straight lines. But, the lines do not go through origin, and their intercepts are equal to 0.13 ppm or its multiple. Due to a non-zero intercept at high-temperature limit, we proposed that there is a charge transfer from NO and from O₂ to C₆₀. The quantity of the charge transferred has been calculated, that is about 0.065 q_e^- (q_e^- for the elementary charge on an electron).     

Improving the Flame Retardancy of Polybenzoxazines with a Reactive Phosphorus-Containing Compound

A novel flame retardant resin was prepared by modifying benzoxazines with a reactive phosphorus-containing compound, 2-(6-Oxido-6H-dibenzo[c,e][1,2]oxa-phosphorin-6-yl) 1,4-benzenediol (ODOPB). The curing reactions of the benzoxazines containing ODOPB (ODOPB-BOZ) and a type of bifunctional benzoxazine (B-BOZ) were investigated via differential scanning calorimetry. The ODOPB-BOZ precursors exhibited lower curing temperature in comparison with the B-BOZ. Through dynamic mechanical analysis tests, it was found that the glass transition temperature and storage modulus of the cured ODOPB-BOZ were lower than those of the cured B-BOZ. Moreover, the tensile and flexural properties of the cured ODOPB-BOZ were also lower than those of the cured B-BOZ. The TGA tests proved that, owing to the presence of ODOPB, the char yield of the polybenzoxazines were remarkably raised while the decomposition rates at higher temperature were reduced. It was found that the flame retardancy of cured ODOPB-BOZ attained V-0 grade upon the UL-94 tests while that of cured B-BOZ was V-1 grade. SEM images showed that more compact char layers were formed in the cured ODOPB-BOZ after combustion, resulting in the improvement of flame retardance.     

Adsorption and manipulation of carbon onions on highly oriented pyrolytic graphite studied with atomic force microscopy

Carbon onions produced by DC arc discharge method were deposited on highly oriented pyrolytic graphite (HOPG) surface and their adsorption and manipulation was studied using an atomic force microscopy (AFM). Well-dispersed adsorption of carbon onions on HOPG surface was obtained and aggregations of onions were not observed. The van der Waals interaction between the onion and HOPG surface and that between two onions, were calculated and discussed using Hamaker's theory. The manipulation of adsorbed onions on HOPG surface was realized using the AFM in both the raster mode and the vector mode. The controllability and precision of two manipulation modes were compared and the vector mode manipulation was found superior, and is a useful technique for the construction of nano-scale devices based on carbon onions.     

Titanium carbonitride films on cemented carbide cutting tool prepared by pulsed high energy density plasma

Hard films prepared by pulsed high energy density plasma (PHEDP) are characterized by high film/substrate adhesive strength, and high wear resistance. Titanium carbonitride (TiCN) films were deposited onto YG11C (ISO G20) cemented carbide cutting tool substrates by PHEDP at room temperature. XRD, XPS, SEM, AES, etc. were adopted to analyze the phases (elements) composition, microstructure and the interface of the films, respectively. The results show that, the uniform dense films are composed of grains ranging from 70 to 90 nm. According to the AES result, there is a broad transition layer between the film and the substrate, due to the ion implantation effect of the PHEDP. The transition layer is favorable for the film/substrate adhesion.     

Field-enhanced diamagnetism in the pseudogap state of the cuprate Bi2Sr2CaCu2O(8+delta) superconductor in an intense magnetic field

In hole-doped cuprates, Nernst experiments imply that the superconducting state is destroyed by spontaneous creation of vortices which destroy phase coherence. Using torque magnetometry on Bi2Sr2CaCu2O(8+delta), we uncover a field-enhanced diamagnetic signal M above the transition temperature Tc that increases with applied field to 32 Tesla and scales just like the Nernst signal. The magnetization results above Tc distinguish M from conventional amplitude fluctuations and strongly support the vortex scenario for the loss of phase coherence at Tc.     

The effect of thermal treatment on the magnetic properties of Ge-doped FeNbB alloys

The effects of Ge doping on the magnetic properties of nanocrystalline FeNbB ribbons are investigated. For amorphous Fe₈₀Nb₁₀Ge₃B₇ alloy, three crystallization processes are observed when heated from room temperature to 1173 K. At 973 K, a harder magnetic phase is formed, which brings about a constricted hysteresis loop. A large increase of relaxation frequency and a dramatic drop of permeability of 973 K-annealed Fe₈₀Nb₁₀Ge₃B₇ alloy are observed. The presence of Nb is essential for the nanocrystallization of α-Fe grains. If Nb is replaced by Ge completely, the thermal treatment will lead to the formation of coarse-grained Fe₃Ge phase rather than nanosized α-Fe grains. The coarse-grained Fe₃Ge results in a remarkable drop in magnetic softness. PACS 75.75.+a; 75.50.Bb