示踪原子法测定Ag/AgNO3-NH3体系的交换电流

The exchange currents of Ag/AgNO_3-NH_3 electrode systems were measured by using radiotrcer method.The magnitude of exchange currents was obtained to be of the order 10~(-7) A. cm~(-2) in solutions with various concentrations of Ag~+(Ⅰ). The data show that the exchange currents decrease with reduction in Ag~+ (Ⅰ) concen- trations.However the difference of exchange currents is not significant.It is in coincidance with the assumption that in very low overpotential region the surface diffusion of adatom is the rate determining step.The experimental conditions that must be fulfilled in order to ensure successful application of this method were also discussed.     

在超音速F-F2-IF与NH3气流中产生IF(B3Π0+)的研究

研究了在超音速F-F_2-IF气流与NH_3气流中通过化学反应与碰撞传能产生IF(B~(3Π_0~+))的过程。用光学多通道分析仪在450-750 nm范围内记录到IF(B~(3Π_0~+)→X~(1∑~+))辐射的33条光谱线。提出了产生IF(B~(3Π_0~+))的机制。     

Mono-and Binuclear Cobalt(Ⅱ) Complexes Supported by Quinoline-2-imidate Ligands:Synthesis,Characterization,and 1,3-Butadiene Polymerization

A series of mono-and binuclear Co(II) complexes(Co1–Co7) supported by quinoline-2-imidate ligands were synthesized and thoroughly characterized.Measured by single crystal X-ray crystallography,complexes Co1 and Co3 adopted distorted tetrahedral structures around the cobalt center.Upon activation by ethylaluminium sesquichloride(EASC),these cobalt complexes exhibited high catalytic activity and cis-1,4-selectivity towards 1,3-butadiene polymerization.The effects of ligand environment,polymerization temperature,and cocatalyst types on the polymerization were investigated in detail.Interestingly,the binuclear Co(II) complexes exhibited high thermal stability,and the polymer yields were up to 97.2% even at a high temperature of 70 °C.     

三维百合花状的CoNi2S4作为先进的双功能电催化剂用于氢析出和氧析出反应

为简化电解水催化剂的合成过程和优化电解水操作系统, 双功能电解水催化剂的研究, 特别是在碱性条件下同时具有优异催化氢析出和氧析出反应性能的双功能电催化剂的研究尤为重要. 其中, 过渡金属硫化物, 特别是 CoNi 硫化物, 被报道有与氢化酶类似的催化活性中心, 从而具有优异的催化氢析出和催化氧析出反应性能. 虽然有关对过渡金属硫化物的研究很多, 但主要集中在具有一维纳米线和二维纳米片形貌结构的过渡金属硫化物. 不幸的是, 这些形貌结构的过渡金属硫化物在电催化过程中容易聚集和受限于电荷传输能力. 三维纳米结构的材料具有较大的比表面积以分布更多的活性位点和拥有良好的电子传输能力, 所以, 开发三维纳米结构的过渡金属硫化物材料可能是改进其催化电解水性能的一个好途径. 本文采用简单的两步水热法, 通过硫化合成的 CoNi 前体得到了长于泡沫镍上的三维百合花状的 CoNi2S4(Co-Ni2S4/Ni). 它只需要 54 mV 的过电位即可获得 10 mA cm-2的催化氢析出反应电流, 是最好的碱性催化氢析出反应电极材料之一. 它在驱动 100 mA cm-2的催化氧析出反应电流时也只需要 328 mV 的过电位. 另外, 把 CoNi2S4/Ni 分别作为阴极和阳极组装成双电极碱性水电解槽时, 它只需要 1.56 V 的电压即可获取 10 mA cm-2的催化全电解水电流并具有良好的催化全电解水稳定性.扫描电子显微镜、透射电子显微镜和 N2吸脱附曲线测试结果表明, 该三维百合花状的 CoNi2S4/Ni 的表面粗糙度高和拥有多孔特性. 多孔结构的 CoNi2S4/Ni 可提供更多可接触的催化活性位点, 也有利于催化过程中的电解质和生成的气体的扩散与传递. 交流阻抗图谱测试结果表明, CoNi2S4/Ni 具有良好的电子传输能力. 另外, 不同于前期对尖晶石结构的硫化物 AB2S4的研究结果, XPS 结果表明, CoNi2S4/Ni 中含有 Niб+和 Sб-活性物种, 表明 CoNi2S4具有与活性氢化酶类似的活 性中心. Niδ+和 Sδ-可分别作为氢氧根和质子的接收体, 协助促进吸附的水分子的分离, 从而提高材料的催化性能. 所以, Niδ+和 Sδ-活性物种的出现, 大比表面积的三维百合花状多孔结构和良好的电荷传输能力等特性集合于 CoNi2S4/Ni 上使得CoNi2S4/Ni 具有优异的催化氢析出和催化氧析出反应性能.     

Experimental study of asphaltene deposition in transparent microchannels using the light absorption method

This study focuses on an experimental investigation of asphaltene deposition in a vertical transparent microchannel. Heptane-induced asphaltene precipitation is utilized to precipitate dissolved asphaltene in crude oil into asphaltene particles at ambient temperature and standard atmospheric pressure. These asphaltene particles deposit gradually on the surface of microchannels. The key parameters that influence the mechanism of asphaltene deposition are the ratio of crude oil to n-heptane and experimental elapsed time. At a constant flowrate, the amount of asphaltene deposited on a transparent channel wall is quantified using a new flow visualization technique based on reflected light intensity and image analysis. Asphaltene precipitation and deposition strongly affect the reflected light intensity through the change of mixture color in the recorded images. Experimental results show that asphaltene deposition process follows three stages, (i) slow asphaltene particle deposition at the beginning of the experiment, (ii) a rapid and continuous deposition occurring after few hours and (iii) a slower deposition (decreasing deposition rate) at the end of the experimentation. The experimental results for different crude oil to n-heptane ratios illustrate that deposition increases with this ratio, i.e. increasing concentration of n-heptane. An empirical equation is developed to correlate the intensity of the light absorption to the thickness of the deposited asphaltene in a transparent microchannel. Non-uniform deposition along the longitudinal direction of the microchannel is characterized. Deposits decrease with increasing longitudinal distance from the inlet. This non-uniform deposition distribution is due to local mass transport limitations and asphaltene aggregation size effect.     

分子印迹技术在黄曲霉毒素检测中的最新研究进展EI北大核心CSCD

黄曲霉毒素(AFT)是由黄曲霉和寄生曲霉等某些菌株产生的一类真菌毒素,主要包括B1,B2,G1,G2,M1,M2,GM,P1,Q1,毒醇等,其中B1的毒性最大,致癌性最强,其广泛存在土壤、动植物、各种坚果、谷物,奶,食用油及其制品中,因此,食品中超痕量及痕量的黄曲霉毒素的检测方法受到高度关注。由于农产品样品基质复杂,而黄曲霉毒素含量和限量极低,高效特异性样品前处理技术是高灵敏精准检测黄曲霉毒素的关键之重。近年来分子印迹技术在样品前处理和核心识别元件等方面发展迅猛,在黄曲霉毒素痕量检测方面凸显出一定优势。综述了近几年来分子印迹技术在黄曲霉毒素前处理及快速检测等方面最新研究进展,并展望了分子印迹技术在黄曲霉检测应用的发展前景。     

Influence of cation on the cellulose dissolution investigated by MD simulation and experiments

Cellulose is the most abundant natural polymer on the earth, and effective solvents are essential for its wide application. Among various solvents such as alkali/urea or ionic liquids, cations all play a very important role on the cellulose dissolution. In this work, the influence of cation on the cellulose dissolution in alkali/urea via a cooling process was investigated with a combination of MD simulation and experiments, including differential scanning calorimetry (DSC) and NMR diffusometry (PFG-SE NMR). The results of DSC proved that the dissolution of cellulose in both solvents was a process within a temperature range, starting at above 0 °C and completing at low temperature (?5 °C for LiOH/urea and ?20 °C for NaOH/urea), indicating the necessity of low temperature for the cellulose dissolution. Molecular dynamic (MD) simulation suggested that the electrostatic force between OH^? and cellulose dominated the inter-molecular interactions. In our findings, Li⁺ could penetrate closer to cellulose, and displayed stronger electrostatic interaction with the biomacromolecule than Na⁺, thus possessed a greater “stabilizing” effect on the OH^?/cellulose interaction. PFG-SE NMR demonstrated a more significant binding fraction of Li⁺ than Na⁺ to cellulose, which was consistent with MD. These results indicated that the direct interactions existed between the cations and cellulose, and Li⁺ exhibited stronger interaction with cellulose, leading to stronger dissolving power.     

Living polymerization of 1,3-butadiene catalyzed by half-titanocene complex bearing dibenzhydryl-substituted aryloxide ligand

Half-titanocene complexes bearing dibenzhydryl-substituted aryloxide ligands(2a-2d) were prepared. Among them, 2c adopted a three-legged distorted tetrahedral geometry evidenced by X-ray crystallography. The poly-1,3-butadiene with high molecular weight and narrow molecular weight distribution was obtained by using these complexes as the catalysts activated with methylaluminoxane(MAO). The catalytic activities of the complexes depended on their structures. The Ti―O―C bond in the complexes with large angle afforded them with higher activity, while Cp*-based complexes exhibited lower activities than the Cp-based analogues. The activity of complex increased with increasing the polymerization temperature while the selectivity remained no change, indicating the high thermal stability. Furthermore, the polymerization of 1,3-butadiene catalyzed by 2a/MAO at 0 °C has been found in a living fashion.     

Preparation of chitosan/N-doped graphene natively grown on hierarchical porous carbon nanocomposite as a sensor platform for determination of tartrazine

In this work,the chitosan and N-doped graphene natively grown on hierarchical porous carbon(N-PC-G/CS) nanocomposite was obtained by ultrasonic method,as a novel sensor platform for determination of tartrazine(TT).The nanocomposite as prepared had well dispersivity in water and excellent conductivity.The N-PC-G/CS nanocomposite was characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),nitrogen adsorption-desorption,fourier transform infrared(FTIR) and electrochemical impedance spectroscopy(EIS).The application of N-PC-G/CS for determination of tartrazine(TT) was investigated by chronocoulometry(CC),cyclic voltammetry(CV) and differential pulse voltammetry(DPV).Under optimized conditions,the sensor displayed a sensitive response to TT within a wide concentration range of 0.05-15.0 μmol/L,the detection limits is 0.036 μmol/L(S/N = 3).Furthermore,this nanocomposite could be efficiently applied for determination of TT in soft drink samples.     

Synthesis,characterization and effects of arm number on properties of amphiphilic polyurethanes as drug delivery carriers

Amphiphilic polyurethanes based on methoxy poly(ethylene glycol) (mPEG) and poly(?-caprolactone) diol (PCL) with different arm numbers such as two, three and four were successfully synthesized. Their structures were confirmed by Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR) and gel permeation chromatography (GPC). The effects of arm number on properties of amphiphilic polyurethanes were studied. Pyrene fluorescence probe technique and dynamic light scattering (DLS) analyses showed that the CMC value and the micellar size of the resultant amphiphilic polyurethanes decreased and the micellar stability against dilution enhanced with increasing the arm number of polyurethane. Using indometacin (IMC) as a model drug, the results indicated that the drug loading capacity and in vitro drug sustained release effect of polyurethane with four arms were better than those of polyurethanes with two and three arms.