119Sn and121Sb Mössbauer studies of BaSn1−x Sb x O3 Perovskite system

The relations between the electrical characteristics of BaSn_1?x Sb _x O₃ perovskite system and the contents of BaO, Sb₂O₃ and silicate sintering agent were studied by X-ray diffraction analysis and Mössbauer spectroscopy. It was found that the electrical conductivity is related to the substitution of Sb³⁺ for Sn⁴⁺, the content of sintering agent and the phase constitutents in samples. BaSnO₃, Ba₃Sn₂O₇, Ba₂SnO₄ and SnO₂ phases might appear in different fractions when the contents of BaO change from 0.5 mole to 3.5 mole. In low antimony percentage condition, pentavalent Sb³⁺ ions inserted in Sn⁴⁺ sites and formed the donor center. In high antimony percentage (x≥0.20) condition, the existence of an insulating phase (BaSb₂O₆) was confirmed.     

Experimental and numerical study on instability structure of the supersonic mixing layer (Mc = 0.5)

The parameters of instability wave of supersonic mixing layer(Mc=0.5,M1=3.5/M2=1.4) are measured by flow visualization and calculated by means of two-dimensional direct numerical simulaitons of the compressible Navier-Stokes equations.In both cases of the mixing layer with harmonic disturbance or not,the comparative results indicate that the wavelength of the two-dimensional wave is equal to the vortex spacing in the streamwise direction because the difference between them is less than 1%.However,the measur...     

Time Domain Impedance Boundary Conditions for a Slip Mean FlowBoundary

In modeling the physical condition of an impedance boundary, the assumption of either particle displacement continuity (PDC) or particle normal velocity continuity (PVC) at the interface between the acoustic treatment and the adjacent fluid needs to be used. Although it is well accepted that the impedance boundary condition derived from the PDC is the appropriate impedance boundary condition when there is a slip mean flow at the liner surface, the time domain impedance boundary condition is however unstable due to the Kelvin‐Helmholtz instability associated with the ”vortex sheet.” In this paper, an effective time domain impedance boundary condition for a slip mean flow boundary is proposed and validated. Several relevant issues related to the PDC and PVC are discussed. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

远距离多源图像融合系统实时配准设计

为了实现全天候多波段远距离实时图像监控,设计了具有微光、红外和可见光融合的光学前端,对多源图像进行实时配准研究。在平行光轴的基础上,通过计算不同视场图像的成像视差,计算仿射变换需要的参数,采用双线性内插算法弥补红外在成像方面与可见光图像的差别,将红外图像的变换制作成查找表存储在图像处理器DM642中,系统通过硬件查找表可以快速实现不同图像的配准变换,实现同步视频的实时配准与融合。实验表明:该设计能够准确地实现多源图像的实时配准,系统经过图像配准、图像融合和伪彩变换处理后的时间约为24.3 ms,系统探测距离大于3 km。     

(p,n)和(p,2n)反应激发函数的系统学研究

从普朗克(Planck)黑体辐射公式和实验测量数据出发,采用唯象的方法提出了包含两个可调参量,入射质子能量从阈能到150MeV,靶核质量数在44相似文献   

一种橙光磷光铱(Ⅲ)配合物的合成、晶体结构及光电性质研究

采用二氯甲烷为溶剂,无水碳酸钾为缚酸剂,在25℃温和条件下,以2-苯基-4-甲基喹啉铱(III)氯桥二聚体[(4m2pq)2Ir(μ-Cl)2Ir(4m2pq)2]和乙酰丙酮(Hacac)进行配位,反应合成了新型铱(Ⅲ)配合物[(4m2pq)2Ir(acac)]。通过核磁共振氢谱(1H NMR)、碳谱(13C NMR)、X射线单晶衍射等确定分子结构,利用紫外-可见吸收光谱、发射光谱对其光物理性质进行研究。结果表明:(4m2pq)2Ir(acac)的单晶结构属三斜晶系,空间群为P1;(4m2pq)2Ir(acac)在二氯甲烷溶液中呈橙光发射,发射峰为597 nm,磷光寿命0.33μs,量子效率达50.4%。以(4m2pq)2Ir(acac)为客体掺杂在CBP中,制备了结构为ITO/NPB(30 nm)/CBP:(4m2pq)2Ir(acac)(质量分数6%和8%,20 nm)/BCP(10 nm)/Alq3(20 nm)/LiF(1 nm)/Al(150 nm)的橙色磷光有机电致发光器件,器件的最大亮度达到39 667 cd/m2,发射峰位于597 nm,最大电流效率为14.2 cd/A,最大功率效率为8.1 lm/W。     

广义a-stable过程局部时增量的H

该文证明了广义α-stable过程局部时增量的H     

卫星激光通信发展现状与趋势分析(特邀)

卫星激光通信凭借其宽带宽以及无电磁频谱约束等特点,成为解决卫星微波通信带宽瓶颈和缓减卫星频谱资源紧张,实现卫星高速通信的有效手段。本文介绍了卫星激光通信的系统组成及特点,分析了国内外卫星激光通信技术领域的发展脉络、最新研究进展和未来发展规划。结合未来空间网络与深空探测需求,从高速化、深空化、集成化、网络化、全光化五个方面总结了未来发展趋势,并对未来涉及的关键技术进行了讨论,为我国卫星激光通信技术研究提供借鉴和参考。     

交流和纳秒脉冲Ar/H2O介质阻挡放电聚丙烯材料表面亲水改性对比研究

为了提高等离子体对聚合物材料表面处理的应用效果,优化亲水处理的条件,研究了交流和纳秒脉冲氩气介质阻挡放电（DBD）中添加适量H₂O,对聚丙烯（PP）亲水改性的处理效果。利用电学和光学诊断方法,系统地对比了交流DBD和纳秒脉冲DBD的放电特性,结果表明,纳秒电源驱动DBD具有更高的放电瞬时功率,更好的放电均匀性和更高的能量效率。通过测量不同水蒸气含量下DBD的OH发射光谱强度,确定了PP材料亲水性处理中H₂O添加的最优含量。利用交流和纳秒脉冲电源驱动DBD分别对PP材料进行亲水改性的处理,测量了不同条件下改性处理后的表面水接触角,并利用原子力显微镜（AFM）和傅里叶红外光谱（FTIR）分别对处理前后PP材料的表面物理形貌和表面化学成分进行分析。结果发现,经DBD处理后PP材料的水接触角明显降低,表面粗糙度明显增大,表面的亲水性含氧基团,羟基（−OH）和羰基（C=O）的数量大幅增加。相比交流电源,纳秒脉冲DBD处理的改性效果更好,其处理后的材料表面水接触角,比交流DBD处理的低5°左右,表面粗糙度也有所提升。而水蒸气的加入可使PP材料的表面水接触角进一步减小4°左右,表面粗糙度明显提升。研究结果为优化DBD聚合物材料表面改性实验条件及处理的效果提供了重要的参考依据。     

Parameter and state estimation algorithm for single-input single-output linear systems using the canonical state space models

This paper presents a new parameter and state estimation algorithm for single-input single-output systems based on canonical state space models from the given input–output data. Difficulties of identification for state space models lie in that there exist unknown noise terms in the formation vector and unknown state variables. By means of the hierarchical identification principle, those noise terms in the information vector are replaced with the estimated residuals and a new least squares algorithm is proposed for parameter estimation and the system states are computed by using the estimated parameters. Finally, an example is provided.