Phase matching limitation of high-efficiency second-harmonic generation in both phase- and group-velocity-matched structures

In this paper, we studied efficient second-harmonic generation (SHG) of femtosecond pulses in both phase- and group-velocity-matched structures. Obtained results show that phase matching becomes more critical under conditions required for high levels of conversion efficiency. And the imperfect phase mismatch caused by mismatched group-velocity dispersion (GVD) will limit conversion efficiency as well as bandwidth of generated second-harmonic (SH) pulses. The spectral characteristics of the generated SH pulses and its conversion efficiency in the strong pump regime are investigated in detail. The acceptance bandwidth of nonlinear crystal in the high-efficiency SHG is redefined in the paper, and the definition is much closer to the practical application of design.     

LD-end-pumped Nd:YAP laser operating at 1341.4 nm and doubling of its frequency

We report an LD-end-pumped linearly-polarized continuous-wave (CW) Nd:YAP laser operating at 1341.4 nm. Making use of the plane-concave resonator (T = 2.4%) and the plane-plane resonator (T = 2.6%), we obtain linearly-polarized laser radiation at 1341.4 nm with a power of 3.15 and 2.86 W and corresponding optical slope efficiency of 18.4 and 17.5%, respectively. The effect of the laser oscillation mode on the output is analyzed. An experiment on the intra-cavity frequency doubling with an LBO crystal has been performed, and a laser power of 431 mW in one direction at 670.7 nm was obtained.     

Numerical simulation of soliton and kink density waves in traffic flow with periodic boundaries

The soliton and kink–antikink density waves are simulated with periodic boundaries, by adding perturbation in the initial condition on single-lane road based on a car-following model. They are reproduced in the form of the space–time evolution of headway, both of which propagate backwards. It is found that the solitons appear only near the neutral stability line regardless of the boundary conditions, and they exhibit upward form when the initial headway is smaller than the safety distance, otherwise they exhibit downward form. Comparison is made between the numerical and analytical results about the amplitude of kink–antikink wave, and the underlying mechanism is analyzed. Besides, it is indicated that the maximal current of traffic flow increases with decreasing safety distance. The numerical simulation shows a good agreement with the analytical results.     

Revisiting the security of quantum dialogue and bidirectional quantum secure direct communication

From the perspective of information theory and cryptography, the security of two quantum dialogue protocols and a bidirectional quantum secure direct communication (QSDC) protocol was analyzed, and it was pointed out that the transmitted information would be partly leaked out in them. That is, any eavesdropper can elicit some information about the secrets from the public annunciations of the legal users. This phenomenon should have been strictly forbidden in a quantum secure communication. In fact, this problem exists in quite a few recent proposals and, therefore, it deserves more research attention in the following related study. Supported by the National High Technology Research and Development Program of China (Grant No. 2006AA01Z419), the National Natural Science Foundation of China (Grant Nos. 90604023 and 60373059), the National Research Foundation for the Doctoral Program of Higher Education of China (Grant No. 20040013007), the National Laboratory for Modern Communications Science Foundation of China (Grant No. 9140C1101010601), the Natural Science Foundation of Beijing (Grant No. 4072020) and the ISN Open Foundation     

脉冲功率应用的IGBT快速驱动电路

根据绝缘栅双极型晶体管(IGBT)的工作特性,研究设计了一种应用于脉冲功率系统的开关驱动电路,实现了IGBT的快速开通。阐述了驱动电路的原理,设计了基于平面变压器的驱动电路,在驱动芯片基础上为栅极提供幅值为60 V脉冲电压,提高开关速度。最后使用Blumlein双线结构对驱动电路的性能进行了实验验证。应用这种驱动方式,提高了集电极电流上升速率。实验结果表明,在1000 V的工作电压下,通过IGBT的脉冲电流达到了470.53 A,脉冲前沿为40 ns,di/dt达到9.41 A/ns,相比数据手册提供的数据,该电流上升速度提高了7.53倍,实现了对IGBT的快速驱动。     

雨滴碰击光缆后光纤应变相位调制分析

基于云动力学理论,分析了雨滴碰击光缆后径向应变导致光纤纤芯折射率及形状发生改变,使光纤内传输光相位受到调制的过程.建立了雨滴碰击光缆引起光纤内传输光相位调制的模型,获得了降雨强度与相位调制之间的关系.研制了雨滴碰击光缆相位调制实验室验证系统,对比了模拟降雨强度分别为3,5,7,10,15,18,22,30 mm/h时的实验测试与仿真结果,两者变化趋势一致,误差在9%以内.该模型可用于仿真获得不同降雨强度下雨滴碰击光缆引起的光相位调制,为进一步研究降雨对光纤振动传感系统性能的影响,优化光纤振动传感工程应用系统,提出可行的雨量补偿方案提供了理论参考.     

界面羟基对碳纳米管摩擦行为和能量耗散的影响

本文采用分子动力学模拟研究了羟基对碳纳米管摩擦和能量耗散方式的影响.研究结果表明:由于界面间氢键的形成,碳纳米管所受的平均摩擦力明显增大;随着羟基比例的改变,界面间氢键的数量与摩擦力的变化趋势一致;碳纳米管的手性角对摩擦力有一定的影响,扶手椅型碳纳米管所受的摩擦力比其他类型的碳纳米管的大;直径对摩擦力的影响较大,直径越大界面间的摩擦力越大,其原因是大直径的碳纳米管底部变平导致界面接触面积增大;界面接枝羟基后,体系的声子态密度中出现羟基的振动峰;随羟基比例的增加,羟基的振动在能量耗散中起到更为重要的作用,当碳纳米管和硅基底的羟基比例为10%/20%时,体系能量耗散的主要途径由碳纳米管和硅基底的振动转变为羟基的振动.     

Topologically protected interface mode in plasmonic waveguide arrays

Recent realization of nontrivial topological phases in photonic systems has provided unprecedented opportunities in steering light flow in novel manners. Based on the Su–Schriffer–Heeger (SSH) model, a topologically protected optical mode was successfully demonstrated in a plasmonic waveguide array with a kinked interface that exhibits a robust nonspreading feature. However, under the same excitation conditions, another antikinked structure seemingly cannot support such a topological interface mode, which appears to be inconsistent with the SSH model. Theoretical calculations are carried out based on the coupled‐mode theory, in which the mode properties, excitation conditions, and the robustness are studied in detail. It is revealed that under the exact eigenstate excitations, both kinked and antikinked structures do support such robust topological interface modes; however, for a realistic single‐waveguide input only the kinked structure does so. It is concluded that the symmetry of interface eigenmodes plays a crucial role, and the odd eigenmode in a kinked structure offers the capacity to excite the nonspreading interface mode in the realistic excitation of a one‐waveguide input. Our finding deepens the understanding of mode excitation and propagation in coupled waveguide systems, and could open a new avenue in optical simulations and photonic designs.

     

Helium irradiation-induced defects in deformed 316L stainless steel

Well-annealed 316L stainless steel was first cold rolled to 10% and 20% reductions in thickness and then irradiated by 50 keV He⁺ to a dose of 1 × 10²⁰ He⁺/m² at room temperature. Thermal desorption spectroscopy was used to investigate the helium desorption behaviour at different helium trapping states. The results showed that high-density dislocations had stronger inhibitory effect for helium desorption at temperatures from 800 to 1200 K. Positron annihilation Doppler broadening spectroscopy measurements were used to investigate the distribution of helium irradiation-induced defects. The S–E and ΔS–E plots clearly demonstrated that the helium irradiation-induced defects were trapped and restricted in motion by dislocations. The interaction between dislocations and helium irradiation-induced defects in deformed 316L stainless steel was investigated.     

Surface voltammetric dealloying investigation on PdCu/C electrocatalysts toward ethanol oxidation in alkaline media

Voltammetric dealloying is employed here to investigate the correlations between catalytic performance and surface composition and structure, taking ethanol oxidation reaction (EOR) on Pd-Cu alloy surface as a case study. First, home-made PdCu/C with a mean particle size of ca. 3.11?±?0.6 nm is dealloyed by repetitive potential cycling in 0.5 M H₂SO₄. With dealloying cycles rising, the Cu component is gradually leached out and the corresponding Pd/Cu atomic ratio gradually increases from ca. 2.1 to 4.0; meanwhile, SEM images display that Pd-rich porous shell is formed due to dealloying-induced surface structural rearrangement, being verified by the appearance of ear-like peaks at ??0.015 V (vs. SCE) in CVs collected in 0.5 M H₂SO₄; furthermore, XPS spectra indicate that core-level binding energies of Pd 3d_5/2 first positively shift to 336.1 eV and then oppositively move down to 334.9 eV, indicating that the d-band center of Pd composition is modulated by the dealloying treatment. Moreover, the voltammetric peak current densities for EOR follow the order of PdCu/C-DA15?>?as-prepared PdCu/C ??>?PdCu/C-DA30 ? commercial Pd/C ? PdCu/C-DA75, due to the modest downshift of Pd d-band center resulted by charge transfer and surface atomic rearrangement. In addition, the EOR durability gradually decays with the continuous loss of Cu, indicating that electro-oxidation of surface species also follows the so-called bi-functional mechanism. This work might provide some new insights into the catalysis enhancement by tuning the surface/interfacial structure of catalysts.

Open image in new window

Graphical abstract The voltammetric peak current densities for ethanol oxidation on home-made PdCu/C catalysts gradually decrease with the dealloying cycles rising, suggesting that the surface voltammetric dealloyment could effectively modulate the surface composition and structure, so as to tune the catalytic performance.