Improved staining of phosphoproteins with high sensitivity in polyacrylamide gels using Stains‐All

An improved Stains‐All (ISA) staining method for phosphoproteins in SDS‐PAGE was described. Down to 0.5–1 ng phosphoproteins (α‐casein, β‐casein, or phosvitin) can be successfully selectively detected by ISA stain, which is approximately 120‐fold higher than that of original Stains‐All stain, but is similar to that of commonly used Pro‐Q Diamond stain. Furthermore, unlike the original Stains‐All protocol that was time consuming and light unstable, ISA stain could be completed within 60 min without resorting to protect the gels from light during the whole staining procedure. According to the results, it is concluded that ISA stain is a rapid, sensitive, specific, and economic staining method for a broad application to the research of phosphoproteins.     

Alternating copolymerization of carbon dioxide and cyclohexene oxide catalyzed by salen CoIII(acetate) complexes

A series of Co^III carboxylate based upon N,N,O,O-tetradentate Schiff base ligand framework have been prepared. X-ray diffraction analysis confirms that these Schiff base Co^III carboxylate are all monomeric species with a six-coordinated central Co in their solid structures. The activities and polycarbonate selectivity of these complexes toward the copolymerization of epoxide (cyclohexene oxide and propylene oxide) and carbon dioxide have been investigated in the presence of bis(triphenylphosphine)iminium chloride. Copolymerization experiments indicate that [bis(α-methyl-3,5-di-tertbutyl-salicylaldehyde) ethylenediiminato] Co^IIIOOCH₃ exhibits the highest activity and polycarbonate selectivity among these Co^III carboxylate. The resultant copolymer contained almost 100 % carbonate linkages with the molecular weight up to 71.8 kg mol^?1 as well as narrow polymer dispersity index (polymer dispersity index?=?1.5). The substituents and the mode of the bridging part between the two nitrogen atoms both exert significant influences upon the progress of the copolymerizations, influencing both the polycarbonate selectivity and the rate of copolymerization.     

Enhanced orientation of PEO polymer chains induced by nanoclays in electrospun PEO/clay composite nanofibers

Polymer fibers composed of poly(ethylene oxide) (PEO) and nanoclay were fabricated by electrospinning. The morphology of the composite nanofibers was characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), which showed aligned nanoclays in the fibers. Polarized Fourier transform infrared (FT-IR) spectroscopy revealed that the PEO chains in the composite fibers exhibit a higher degree of orientation than that in PEO nanofibers containing no nanoclay. It is believed that spatial confinement is present in the electrospun nanofibers, which results in the enforcement of the mutual restriction. The anisotropic hierarchical nanostructure may have potential applications in optics, mechanical materials, and biomedical materials for cell culture.     

单分散磁性Fe3O4纳米粒子修饰石墨烯的制备及应用

通过油相热分解法在石墨烯(Gr)的表面修饰单分散的Fe3O4纳米颗粒,然后将二亚乙基三胺五乙酸(DTPA)通过多巴胺(DPA)化学键合到到Gr复合物表面,制备了新型磁性纳米复合材料Gr@Fe3O4-DPA-DTPA,采用X射线衍射、透射电镜、振动样品磁强计、傅里叶红外、拉曼和紫外光谱等技术对该材料进行了表征。结果表明,材料对水中的芳香族化合物和重金属离子具有很强的吸附能力,对水中的萘和Cu2+的吸附容量分别达到207.9和72.2mg/g。     

Synthesis of high molecular weight and narrow molecular weight distribution poly(acrylonitrile) via RAFT polymerization

Well‐defined polyacrylonitrile (PAN) of high viscosity‐average molecular weight (M_η = 405,100 g/mol) was successfully synthesized using reversible addition‐fragmentation chain transfer polymerization. The polymerization exhibits controlled characters: molecular weights of the resultant PANs increasing approximately linearly with monomer conversion and keeping narrow molecular weight distributions. The addition of 0.01 equiv (relative to monomer acrylonitrile) of Lewis acid AlCl₃ in the polymerization system afforded the obtained PAN with an improved isotacticity (by 8%). In addition, the influence of molecular weights and molecular weight distributions of PANs on the morphology of the electrospun fibers was investigated. The results showed that, under the same conditions of electrospinning, average diameter (247–1094 nm) of fibers increased with molecular weights of PANs, and it was much easier to get “uniform” diameter fibers while using PANs with narrow molecular weight distributions as the precursor of electrospinning. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Preparation and photoelectrochemical performance of PbSe/BaTiO3/TiO2 composite film

By dipping-lifting in sol–gel solution and reducing process, the TiO₂ composite film on the glass plate was first prepared. Then, the PbSe/BaTiO₃/TiO₂ composite film was fabricated by interface reaction with BaTiO₃ and PbSe on the surface of TiO₂ composite film. The characterization results show that the uniform porous TiO₂ film is made up of the anatase crystal, and the PbSe/BaTiO₃/TiO₂ composite film is constructed by doping or depositing BaTiO₃ and PbSe nanoparticles on the surface of TiO₂ film. The photoelectrochemical measurement results indicate that the PbSe/BaTiO₃/TiO₂ composite film has an interesting photoelectrochemical conversion property.     

Well‐Dispersed Pt Cubes on Porous Cu Foam: High‐Performance Catalysts for the Electrochemical Oxidation of Glucose in Neutral Media

The investigation of highly efficient catalysts for the electrochemical oxidation of glucose is the most critical challenge to commercialize nonenzymatic glucose sensors, which display a few attractive superiorities including the sufficient stability of their properties and the desired reproducibility of results over enzyme electrodes. Herein we propose a new and very promising catalyst: Pt cubes well‐dispersed on the porous Cu foam, for the the electrochemical oxidation reaction of glucose in neutral media. The catalyst is fabricated in situ on a homemade screen‐printed carbon electrode (SPCE) substrate through initially synthesizing the three‐dimensional (3D) porous Cu foam using a hydrogen evolution assisted electrodeposition strategy, followed by electrochemically reducing the platinic precursor simply and conveniently. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) proofs demonstrate that Pt cubes, with an average size (the distance of opposite faces) of 185.1 nm, highly dispersed on the macro/nanopore integrated Cu foam support can be reproducibly obtained. The results of electrochemical tests indicate that the cubic Pt‐based catalyst exhibits significant enhancement on the catalytic activity towards the electrooxidation of glucose in the presence of chloride ions, providing a specific activity 6.7 times and a mass activity 5.3 times those of commercial Pt/C catalysts at ?0.4 V (vs. Ag/AgCl). In addition, the proposed catalyst shows excellent stability of performance, with only a 2.8 % loss of electrocatalytic activity after 100 repetitive measurements.     

Structural and Dynamic Basis of Human Cytochrome P450 7B1: A Survey of Substrate Selectivity and Major Active Site Access Channels

Cytochrome P450 (CYP) 7B1 is a steroid cytochrome P450 7α‐hydroxylase that has been linked directly with bile salt synthesis and hereditary spastic paraplegia type 5 (SPG5). The enzyme provides the primary metabolic route for neurosteroids dehydroepiandrosterone (DHEA), cholesterol derivatives 25‐hydroxycholesterol (25‐HOChol), and other steroids such as 5α‐androstane‐3β,17β‐diol (anediol), and 5α‐androstene‐3β,17β‐diol (enediol). A series of investigations including homology modeling, molecular dynamics (MD), and automatic docking, combined with the results of previous experimental site‐directed mutagenesis studies and access channels analysis, have identified the structural features relevant to the substrate selectivity of CYP7B1. The results clearly identify the dominant access channels and critical residues responsible for ligand binding. Both binding free energy analysis and total interaction energy analysis are consistent with the experimental conclusion that 25‐HOChol is the best substrate. According to 20 ns MD simulations, the Phe cluster residues that lie above the active site, particularly Phe489, are proposed to merge the active site with the adjacent channel to the surface and accommodate substrate binding in a reasonable orientation. The investigation of CYP7B1–substrate binding modes provides detailed insights into the poorly understood structural features of human CYP7B1 at the atomic level, and will be valuable information for drug development and protein engineering.     

聚合物熔体界面扩散理论与研究方法

本文结合与聚合物加工过程密切相关的界面扩散问题,从动力学和热力学两方面综述了与聚合物界面互扩散相关的基础理论.结合在聚合物界面扩散方面的研究进展,系统介绍了聚合物熔体界面扩散的常用研究方法.对其中的流变学方法的原理及进展作了重点论述,该方法不仅可以有效表征聚合物熔体界面扩散的动力学过程,进一步从分子动力学角度发展并完善聚合物扩散理论,而且对于聚合物加工成型过程的界面结构设计和性能优化起到关键的指导作用.本文最后提出了聚合物熔体界面扩散研究中存在的问题并对其前景进行了展望.     

镁电解槽中制备镁稀土合金的电解工艺及机制研究

在模拟镁电解槽中,采用电解法制备出稀土含量<10%的镁稀土合金;研究了熔盐中RECl3和CaCl2的含量、电解温度和阴极电流密度对合金中RE含量和电流效率的影响。并采用循环伏安实验和还原实验研究电解制备镁稀土合金的机制。研究结果表明,电解制备镁稀土合金最佳的工艺条件为:熔盐中RECl3和CaCl2的含量分别为3%和10%(质量分数),电解温度为948 K,阴极电流密度约为8 A.cm-2。其电解过程机制为:阴极上只电解出金属镁,而后金属镁把稀土元素还原出来,形成镁稀土合金。